Camera arm for X-axis (Prusa I3MK3s+). Smallest camera with Sony video chip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera arm to mount the smallest Sony video chip USB-webcam (eye-to-cam) to the X-axis of a Prusa I3 MK3 S+
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like monitoring my 3D prints with Webcams (nozzle-cam) etc.
I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.
https://global-survaq-store.com/products/etc2?variant=41323772084429
I printed my model in an upright position with the camera on top. I added a few paint on supports in the cable outlet of the camera part. 
PETG (Prusament jet black), 0,4mm Revo Nozzle, 0,20mm layer height for quality.
The arm is mounted with a 10mm M3 hex screw (you have plenty of them in the spare parts bag.
The camera slides in the preformed hole an stays fixed without a screw or glue. It’s a tight fit. You may strap on the USB cable with up to three zippiest using the preformed slits. 
These are the images you get with this cam:
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra