Camera arm for X-axis (Prusa I3MK3s+). Smallest camera with Sony video chip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera arm to mount the smallest Sony video chip USB-webcam (eye-to-cam) to the X-axis of a Prusa I3 MK3 S+
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like monitoring my 3D prints with Webcams (nozzle-cam) etc.
I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.
https://global-survaq-store.com/products/etc2?variant=41323772084429
I printed my model in an upright position with the camera on top. I added a few paint on supports in the cable outlet of the camera part. 
PETG (Prusament jet black), 0,4mm Revo Nozzle, 0,20mm layer height for quality.
The arm is mounted with a 10mm M3 hex screw (you have plenty of them in the spare parts bag.
The camera slides in the preformed hole an stays fixed without a screw or glue. It’s a tight fit. You may strap on the USB cable with up to three zippiest using the preformed slits. 
These are the images you get with this cam:
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra