Prusa i3MK3S+ y-rod-holder for standard M3 Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Prusa i3MK3S+ y-rod-holder which I modified a tiny bit to make it work with standard M3 nuts.
- Rating
- 4.75 / 5
- Likes
- 14
- Downloads
- 166
- Makes
- 1
- Views
- 813
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This is the Prusa i3MK3S+ y-rod-holder which I modified a tiny bit to make it work with standard M3 nuts. I ordered only the bearing clamps and was able to do the whole y-axis upgrade with this (since I had only normal M3 nuts). Now my y-axis is a bit less noisy and callibration improved to perpendicular. :)
You will need 4 additional M3x10 screws and 12xM3 nuts.
If you've got 4 M3nS nuts left in your "spare parts" you could simply use the normal y-rod-holder and the 8 nuts from the old holders. But this works just as well.
Print instructions
PETG
0.20 mm
30% grid infill
No supports