1 / 2
Prusa i3MK3S+ y-rod-holder for standard M3 Nut — zdjęcie 1
1 / 2

Prusa i3MK3S+ y-rod-holder for standard M3 Nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the Prusa i3MK3S+ y-rod-holder which I modified a tiny bit to make it work with standard M3 nuts.

Ocena
4,75 / 5
Polubienia
14
Pobrania
166
Wydruki
1
Wyświetlenia
813
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This is the Prusa i3MK3S+ y-rod-holder which I modified a tiny bit to make it work with standard M3 nuts. I ordered only the bearing clamps and was able to do the whole y-axis upgrade with this (since I had only normal M3 nuts). Now my y-axis is a bit less noisy and callibration improved to perpendicular. :)

You will need 4 additional M3x10 screws and 12xM3 nuts.

If you've got 4 M3nS nuts left in your "spare parts" you could simply use the normal y-rod-holder and the 8 nuts from the old holders. But this works just as well.

Print instructions

PETG
0.20 mm
30% grid infill
No supports

Tagi