VFA Test Prusa Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VFA Test for Prusa Core One
- Ocena
- 5 / 5
- Polubienia
- 281
- Pobrania
- 2401
- Wydruki
- 49
- Wyświetlenia
- 8051
- Oceny
- 44
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
From orginal author
Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s.
You must use the gcode file; the 3MF is the PrusaSlicer project.
I'm uploading this gcode as PrusaSlicer currently does not have the functionality to automatically create such tests. This one is based off the one found in OrcaSlicer.
The profile is for a Core One (no MMU) with a 0.4mm highflow nozzle. It's sliced for PLA at 0.20mm layer height in vase mode.
Included is the PrusaSlicer project (3MF) if you wish to look more closely at it, or slice for different settings. The external perimeter speed is set to 100mm/s, then speed is controlled through custom gcode commands. For example, after the first layer we use
M220 S40to set the speed to 40%, which is 40mm/s.
If you use different filaments please check the minimum layer time. Set this to something like 1s