Liczymy pasujące modele…
Similar to a T-track tray , but with different holes for the accessories I use with the Shaper workstation: 19 mm Wrench 4mm Allen Wrench Vacuum Hose clips Router bits Suction brush Although the tray can stand by itself, it can be secured…
Wydruk około 5,51 €–6,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das Model testet den Einsatz von Input Shaping Damit ich eine schwarze Magnet-Werkzeugleiste in der Küche verwenden kann, habe ich eine foliendünne weisse Hülle gedruckt, mit der ich die Leiste verkleidet habe. Sie dient jetzt als Messer-…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can get the FYSETC Portable Input Shaper here: Aliexpress:…
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
I use a MPU6050 to calibrate the Input Shaper of my printers, so i've modeled this to make the process easir. Just print it in the middle of the bed, then screw the MPU.
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
Same process as the original, just a different shape! More suited for a different set of tricks, or as a fidget toy. Closest comparison is an old tech deck. Use the original model's 30mm mold for the board pressing, then this one's shaper…
Instead of using the provided bracket to hold the Benchpilot EStop, install it on the side of table, against the aluminium profile. BOM 6 M5 nuts 4 25mm M5 Button Head Socket Cap Screws Bolts (20 mm should be fine as well) 2 15mm M5…
since there are two parts to the Billiards / Pool Cue Shaper it was best to label them to easily Identify what was the the Nickel vs the Dime shape.
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
Prusa Core One / Core One+ – Internal Input Shaper Mount Adapter Tired of pulling your Prusa Core One or Prusa Core One+ away from the wall just to plug in the accelerometer? This mount relocates the Input Shaper accelerometer connection…
Simpler Spannzangenschlüssel für Shaper Origin oder Festool. Gedruckt mit 3 Außenwänden und 10% Infill in PLA Englisch Version: Simple collet wrench for Shaper Origin or Festool. Printed with 3 perimeter walls and 10% infill in PLA.
Simple shaper / limiter / holder for various stems or smaller twigs. I use it to keep some twigs more upward growing and not “crawling” on ground. Models with 3x, 4x, 5x and 6x have several “catching hooks” and all have 150mm diameter.…
When working on long pieces, the 20mm frame is limiting the thickness of the pieces. With 4 feet like these, we can use the MFT table as the frame. Installation make sure the locking pins from the left and right arms are in place before…
This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host. Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure…
I recently remixed a portable input shaper mount, but after watching a Modbot video on the best location for input shaping decided to design a new one which lowered the Portable Input Shaper closer to the nozzle. Without removing the part…
Well, why wasting money on a shaper on Amazon while you can print it yourself I can't find anything that's similar to what I designed here so I made one myself When importing the model to your slicer, split part to objects so you can…
Your easy to print ally for mindfulness at your desk. This tool is designed for effortless printing at home, allowing you to swiftly bring four unique and calming patterns into the sand of your desktop zen garden. I'm always open to…
Remixed the front left panel for a panel mount USB for routing to my Pi. Will be used when using input shaper via a pi pico/adxl set up. This is for the 300x300 Voron 2.4 R2 build. Just started printing parts. Will update the post with…
Mount for the PIS (Portable Input Shaper). Use heat insert, 3x40mm and 3x5mm screws Wide and narrow version available.
i woiuld oreinate the part standing up so the layer lines are a smoother surface. and will still require some sanding depending on how you set the print quality .
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
T-Track tray for shaper origin hex, wrench, bits, and tape. Full tape might be a tight fit… so use some first!
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
Attached are two different mounts for two different accelerometers. One from Adafruit: https://www.adafruit.com/product/1231#technical-details One from HiLetGo (Amazon):…
Print as already oriented. No supports required. Print the square nut version if using hardware provided by CoPrint, otherwise print the regular nut version if needed. Follow the PDF to learn how to set up the board and to do Resonance…
Print the two parts attach the top one with one screw first Using a square to ensure positioning, put the second screw in. Holding the bottom piece in place, mark the top edge with a pencil. repeat 2 & 3 for the bottom part. Bring the…
I felt that the angle stop was missing a more accurate refrence to the angle markings on the shaper workstation. Added a feature inspired by the Vernier scale. each following point is one additional degree offset. you refrence these to…
X axis accelerometer board mount for TAZ moarstruder style head. Build with support for cable tie overhang.
Insert to assist in alignment process of shaper origin. or to verify your grid or cut. Updated a slot to clear the collet when inserting with spindle installed. Updated to a more practical guide pattern
a dummy spindle adapter for mounting a Sharpie fine point Permanent marker. Ive attached other adapters for the following other marking pens: Sharpie Ultra fine point marker Bic Round Stic M ball point pen Shaper Trace Artist Pen.…
This small platform will allow you to mount BTT USB-C input shapers to a 40mm fan while leaving enough clearance for airflow. It shouldn't have any issues printing flat-side down without supports. I printed in PETG with 20% Gyroid Infill.…
An adapter to connect your original Shaper Origin vacuum pipe to a 100mm vacuum pipe. The adapter can be screwed onto the Shaper Origin vacuum pipe. Also provided is a thread deburr-er to "clean" the 3D printed thread of print artefacts…
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed. Do not remove from the build plate. Allow the bed to cool down and mount the…
This is a storage box for the very popular knife roller sharperner, This box holds the roller with 2 disks attached and can store 2 additional roller disks. The box with added magnets replaces the default knife angle magnetic holder that…
this model is best printer with resin and only needs supports on the overlap.
Simple shaper that I designed to shape the brim of your hat! One size fits all!
Struggling to shape your eyebrow pencil? Here’s a simple solution! Introducing the Eyebrow Pencil Shaper , a tool I designed after my wife asked me to shape her eyebrow pencil. This handy model makes the process quick and effortless. How…
Same configuration as the original, I just modified it so that it could be used on MK8 nozzles with a 6mm hex profile.
This model has smaller holes you you can self tap the PIS in instead of heat set inserts. This uses two M3x6 and two M3x40, there is also a M3x45 version.
A simple USB light to fit directly on the Shaper Origin spindle. I used two superbright LED and the Origin USB-C port (with an adapter) to power it. --Some basic soldering skills are required-- Printing Instructions: Material: ASA…
This is a small carrier and mounting hardware to attach the BTT ADXL345 to the X and then Y axis of a bedslinger. I use it on my Klippered Prusa MK3S+. Then you can do the input shaping. It is easy to print. I used PLA. Other pieces…
☕ Enhance your brewing experience with this 3D-printed mold designed to give your V60 coffee filter the perfect shape . Its precise design ensures an ideal fit in the dripper, prevent folds and bypasses to ensure even extraction. This…
☕ Enhance your brewing experience with this 3D-printed mold designed to give your Cafec Deep 27 coffee filter the perfect shape . Its precise design ensures an ideal fit in the dripper, prevent folds and bypasses to ensure even…
A modified version of the input shaper mount for the Voron V0.2 to take generic 15.5mm IMU units. The one I use is here: https://www.aliexpress.us/item/3256807321107101.html The cable I use is here: https://www.amazon.com/dp/B0CCJLS4R5…
Simply print it in the center of your print-bed and screw on your MPU6050 sensor while the mount is still attached to the bed. Happy calibrating!
This model contains a number of 3D printed parts I used to store shaper cutterheads in either wooden drawers or adhere to a metal drawer bottom. Several heights are provided and one of the designs provides a 2mm thick flange on the bottom…
Same process as the original, just a different shape! More suited for a different set of tricks, or as a fidget toy. Closest comparison is an old tech deck. Use the original model's 30mm mold for the board pressing, then this one's shaper…
a drop in insert that closes the aperature of the dust shroud. sized so that it leaves 1/16" of clearance of the collet at its maximum range. if your router bits are smaller than the diameter of the collet then there will not be…
Measured base plate model and an expanded version. I included dxf files and stls to make the parts.
Mold for wax seal. Just melt the wax into the mold, lightly press down with your stamp and your done!
This is a setup jig for the Garniga Adjustable Radius shear cutterhead. It looks like it should work with the TWT head as well. I have always been frustrated setting the adjustable radius knives on this as it was near impossible to set…
This lid is intended to fit the NokBox 8x8 TTRPG Dice Box found here: LINK Graphic recreated in Solidworks using the following as a reference: LINK I recommend printing it graphic side down on a textured build-plate using the “Only 1 wall…
Wax seal shaper will make your seals look perfect ! There are two PACKs with slightly diferent sizes The first one is smaller The second one is bigger Both consist of four shapes to choose from: Circle Square Wave Flower
Currently made for wide 11.5 size shoes but can scale up or down depending on your shoe size. 3in base 2.5in top and 3in height.
This is a custom-designed mount for the FYSETC Portable Input Shaper (PIS) , tailored specifically for the Anycubic Kobra Neo . Inspired by this MakerWorld design , but improved for full compatibility with the Kobra Neo — no additional…
Remixed to adjust for fysetc portable input shaper. This version is also only for the bed and found the fysetc to large for the toolhead. You should still use the washers from the original model.
Fysetc portable input shaper board adapter for the E3NG V1.2 4010 and 4020 toolheads. BOM: - 2x M3x5 - 2x M3x25 Instructions: Screw down the Fysetc board to the bracket using the 2 M3x5 screws. Remove the original M3x20mm screws from the…
This adapter just slides onto the Shaper Origin. I have the older model. I don't know if the newer Shaper Origin has the same geometry. The fit is pretty tight, so you don't lose the hose. I printed it in ASA Prusament with 4 perimeters.
My daughter has gotten really into ceramics. She asked me to make her some rim cones. I didn’t even know what those were at first, but once she explained and I researched, I made what she needed—plus a few extras. She and my son jokingly…
Higher Stop Fence (than the original) for the ShaperOrigin Workstation, for making repetitive workpiece in identical Location. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: extrudr PETG yellow Post-Printing…
Precision 3D-Printed Set Angle Stops for Accurate, Repeatable Cuts Achieve consistent, professional-quality results with these precision 3D-printed set angle stops , designed to lock in exact angles for repeatable and accurate cutting .…
Used with the Shaper Origin router. This dummy spindle can be used for gridding exclusively to avoid changing bits in the original spindle. This helps speed up the gridding process. Insert ¼ inch dowel in the end and you're good to go.…
I use the Shaper Station for 90% of my Shaper Origin projects. The clamps used to hold it down to my MFT seem to always catch power cords/hoses/my arm, etc. (I have my MFT mounted on a mobile table, so there's not much room below it to…
Overview Dovetail Shaper Plates are interlocking flat plates with embedded Shaper dominoes, designed for use with the Shaper Origin . They can be used to set up custom jigs and workspaces for cutting smaller parts without the need for…
Designed and printed for a friend, comes with step files and a screw on adapter to make it easy to adapt to different size smoke machine output ducts. Will update with pics of it in use soon, send pics of your setup! :) Printed at 0.2mm…
This one-part, print-in-place empanada maker allows you to simply put the dough circle onto the maker, put the filling in the middle, and the maker will allow you to easily close it and shut it. Let me know if you have any suggestions or…
Description A dual Z-axis upgrade solution specifically designed for the Prusa MINI/MINI+, which accurately addresses the core pain points of the single Z-axis structure + remote extrusion design — "Z-axis unevenness" and "XY-axis…
Parts to allow securing the ShaperTools BenchPilot to a Festool MTF/3 table, or any bench with 96mm pattern of 20mm holes. After installing the frame on the MFT3, use knobs to secure it. Homemade knob comes from this parametric design .…
The LiPo fireproof bag I ordered came in folded, and didn't look like it wanted to stay in a square shape, so I printed this shaper/placeholder. Print in draft mode for a quicker print. STEP file provided if you want to turn this into an…
Instead of using the provided bracket to hold the Benchpilot EStop, install it on the side of table, against the aluminium profile. BOM 6 M5 nuts 4 25mm M5 Button Head Socket Cap Screws Bolts (20 mm should be fine as well) 2 15mm M5…
Tento pořadač je navržen tak, aby měl uživatel všechny důležité pomůcky vždy přehledně a okamžitě k dispozici:frézy bezpečně uložené na svém místě,klíče pro výměnu fréz přehledně uspořádané,role ShaperTape uložená v samostatné chráněné…
Following on BenchPilot MFT holder , the model lift the workstation by 5mm above the BenchPilot; otherwise the Shaper Origin will not sit flat on the workstation when connected to BenchPilot. See thread . This print is inspired by…
since there are two parts to the Billiards / Pool Cue Shaper it was best to label them to easily Identify what was the the Nickel vs the Dime shape.
I recently added the extended shelf and leg to my Shaper Origin Station. I already had a larger shelf with dog holes which I wanted to use as well. Rather than going through the bother or transferring the leg connector to the other shelf…
Printing suggestions: I used PLA with a 0.2mm layer height to build this. There are 3 files including a knob, knife holder, and spacer. With proper orientation, supports are not required. Knob - use variable layer height to smooth top of…
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
If you’ve ever tossed the Prusa Core One input shaper accelerometer back in a drawer and later found it tangled, scratched, or mysteriously “missing a cable”… this case is for you. This is an original, from-scratch design : a compact…
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
Prusa Core One / Core One+ – Internal Input Shaper Mount Adapter Tired of pulling your Prusa Core One or Prusa Core One+ away from the wall just to plug in the accelerometer? This mount relocates the Input Shaper accelerometer connection…
I bought a second hand cue and it had no tip. I bought new tips and glued one on then proceeded to sand it, following a youtube video... Turns out I'm not good at shaping cue tips as it wasn't very straight. So I decided to build a simple…
Simpler Spannzangenschlüssel für Shaper Origin oder Festool. Gedruckt mit 3 Außenwänden und 10% Infill in PLA Englisch Version: Simple collet wrench for Shaper Origin or Festool. Printed with 3 perimeter walls and 10% infill in PLA.
This is a case I designed after watching Nero3DPs video on using a Pi Pico for input shaper. You will need 4x M2 self tapping screws to close up the case and then an acceptable wiring loom (an ethernet cable will work great).
Simple shaper / limiter / holder for various stems or smaller twigs. I use it to keep some twigs more upward growing and not “crawling” on ground. Models with 3x, 4x, 5x and 6x have several “catching hooks” and all have 150mm diameter.…
This is a more compact solution to store your Freud raised panel shaper insert cutter set. 1-1/4" bore and ~6-3/4" in diameter. Rotate to print lid on top and base on the bottom.
storage box for your insert shaper cutters. The lid fits either base. print the lid on it's top and the base on it's bottom
Various size round shaper cutter storage containers. I tried to lable the size of the containers as best as I could the approximate sizes
Make burger night even better with this fun and easy-to-use patty shaper! Designed to give you perfectly round, evenly sized patties, it takes the guesswork (and mess) out of prepping your favorite burgers. Just press your ground meat…
