10mm Cue Tip Shaper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 piece shaper roughly the size of chalk
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
I bought a second hand cue and it had no tip. I bought new tips and glued one on then proceeded to sand it, following a youtube video...
Turns out I'm not good at shaping cue tips as it wasn't very straight. So I decided to build a simple shaper and 3D print it.
Completely out of PETG, 0.3mm draft , 15% infill. I printed it on its side with a support inforcer to confine supports only to the hole for the cue tip. I can insert strips of 12mm sand paper and shape the tip with ease. I typically place the sharpener on the floor between my feet and rotate the cue like I'm starting a fire. When the sandpaper wears out I pull a little more through and carry on.. like an old school cap gun. Works better than I expected. I've made it about the size of cue chalk, so it will fit in cue cases or wherever you typically keep your chalk.