Liczymy pasujące modele…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
A compact and reliable filament rewinder based on a linear counterweight mechanism that can be produced in a single 11 hour print. Provides a complete filament management solution eliminating the need for the space wasting and difficult…
Wydruk około 10,88 €–13,30 € nettoWstępna wycena jednego wariantu
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
A simple and durable S-Hook that is also easy and fast to print! The hook on the picture was printed with Polymaker PolyTerra Sunrise Orange filament. The print is plenty durable printed in this material, but printing it in for example…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
This is a weights rack inspired by your neighbourhood gym in desk-size for your pens to show off just how much you love to lift pens while at work. The model files are in the right orientation for printing and do not require any…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
I needed a simple table to help my kids to learn multiplication. Sure. You can just print it on a paper, but what a nerd would I be. So i've made a 3d-printed one. Print instructions Material: Any (PETG in my case) Resolution: 0.2mm…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Wydruk około 5,09 €–6,22 € nettoWstępna wycena jednego wariantu
This model is a hook folder for your fishing rod. On one side is a catch for a hook, on the other side is a line catch if you want use a sinker or other tackle to secure your line rather than a hook. I made this model after looking for a…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
7 in 1 - Unisex Grooming Multipurpose Tool Features : Comb Beard Trim Stencil Eyeliner Guide / Stencil Star / Heart Stencil Eyelash / Mascara Shield Guard Emergency Earbud Holder to touch up any messed up make up Keychain! Print…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
7 in 1 - Artist Multipurpose Tool Features : Scale 60mm Sharpener Pencil Holder Eraser Holder Fixed Angle Protractor - 60° / 90° / 120° / 135° Golden Ratio Stencil Keychain! Print Parameters : Layer height - 200um / 0.2mm (100mms Linear…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Info: glasses temples bent more behind ear than https://www.printables.com/model/205857-fun-nerd-glasses-with-interchangable-lenses-choose so glasses are more safely positioned for usage with :…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Usage notes: Designed to be used with 4 SAE 8-32 bolts Tap or use nuts to attach to material Each leg of the brace is 1.125" (1-1/8") long
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Quantities to print for each STL file: Base (x1), Cover (x1), Container (x3)
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
This Gadget Makes Peeling an Orange or a Pomelo a Breeze! + No knife needed + Easy take-away + Quick print + More safe to use by children (no knife) + Comes in two versions: For thick and thin fruit-skins Printing Recommendations: 0.2 mm…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Bit Tip - T Key , Add more torque to your assemblies! This print has a good resistence, allows you add an extra torque to your assemblies, is pretty easy to print. Takes only 38min .28 Layer Height 20% Infill 212F Temp of Nozzle (solutech…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
A small box to store your ruthex tips for threaded inserts. Use two pieces of 1,75mm filament as bolts for the hinges. It might be necessary to drill up the holes with a small drill bit after printing.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Using Fusion 360, I've designed and 3D printed a fun tool for reviewing multiplication tables from one to twelve. Turn the wheel with the crank to select the table you want to memorize. Except for step 2, which may require the help of an…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is our multipurpose watering can. It can be disassambled to reveal a shovel and a rake. Providing you with every tool for your gardening needs . The can stores 1.5 litres and you don't risk to lose any tool of the set. The Shovel can…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Universal clip for holding book pages, when you want it just laying down on table. Alternatively you can use it for holding flipped pages on notebook.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
An organizer for the Pinecil soldering iron from Pine64, and its tips and cable. Inspired by Zef 's print of Zokol's Pinecil organizer. Thanks for including the STEP file! I modified the design to remove the solder and screwdriver slots,…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
A multipurpose cable hook that is fast (~16 minutes per hook) and easy to print. This design should also be rather durable even printed in PLA, but especially so when printed in PETG or equivalent. The hooks on the pictures were printed…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
My nephew who is just learning multiplication had trouble using the multiplication table on paper. When he tried to track rows and columns to find the results, his finger would easily slip in a different row or collumn. This is a simple…
Wydruk około 6,63 €–8,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very tactile math game to help children learn and reinforce simple mathematics. You will need a 'normal' six sided die and a six sided die that has the numbers from 7-12. Take turns rolling the dice and capturing squares. If you…
Wydruk około 15,77 €–19,28 € nettoWstępna wycena jednego wariantu
What are Multiplication Circles? Multiplication circles are a tool used to create a visual representation of the pattern created when you multiply numbers by the same factor. Often times you might find them made on paper, with chalk, or…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Multipurpose strut/spring spacer (english is not my native language, I couldn't name it properly :D). I was sick of looking at bended documents in ikea tjena organizer, so designed something to fix it. But it can have a lot of different…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Important Note: There are two configurations of this part: Enclosed nut ( Twisted Knob - Nut.stl ): make sure to add a pause print at the layer above the nut in order to insert it. The nut may be a press fit depending on your printer's…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
A connector to make a pentagonal antiprism out of straws.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
The Renault Clio GT (2008) has a 'curtain cover' for the trunk. You pull back a bar to cover the trunk contents until you reach the hooks. The rail tips on the bar are plastic and not very sturdy. Mine broke, this is the replacement.…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Versatile Organizer for Small Items Keep your workspace tidy with this versatile organizer, perfect for storing various small items. Originally designed to hold tubes of glue, this organizer can be used for many different things, from…
Wydruk około 8,28 €–10,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clip the Tip onto the Front of the airplane, or the back of the airplane that connects the wings
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
A twelve-sided shape made of regular pentagons and equilateral triangles.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Beste Druckbarkeit mit Prusament PETG bei nur 244°C! Erstaunlich gut bei Recykeltem PETG! Geringe Degradation ermöglicht wohlmöglich erneutes Reycling! Wenn die Tasse von vorne herein nicht zum Trinken und Essen genutz werden soll sondern…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Included in the files for this Santa Coaster are English, Czech (of course), Spanish, French, German, Italian and Swedish/Norwegian language variants. I've only printed the English versions, but the other language variants were simple…
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu
Simple model for cutting new slots
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
The dish drainer can be found here: https://www.ikea.com/ca/en/p/rinnig-dish-drainer-double-sided-10387261/ Cheese-themed, you may use this in any scenario to provide a 30 ° slope to objects. Some ridges can match a rail system to provide…
Wydruk około 3,74 €–4,58 € nettoWstępna wycena jednego wariantu
Editable and minimalist multipurpose stand for any project. Find attached the FreeCAD editable file to modify the dimensions to your needs. I personally use it as a increasing bridge for my kids train tracks as shown in the pictures. I…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Trimina ve tvaru hvězdy na téma násobilka. Star-shaped trimmings on the theme of multiplication.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…
Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
This is a set of containers with a twist lock lid. The containers are roughly 4 inches in diameter and come in 5 sizes : 2, 3, 4, 5 and 6 inches. There are four dots on perimeter of the lids that align with the locking features on the…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
This is a waste container I design to use for multiple propouses like bambulab X1/P1 waste, pencil holder, store boxes… and other propouse you can give it. In the following steps, I'll explain what you need to do to assemble the…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
This is a multipart model of Fred the Frog with a Lillypad that I remixed from two models on Thingiverse. The Frog has been split into parts for printing with either an MMU or as separate parts on a single filament printer. For the…
I created this column to be printed as a short display stand for some product photography on one of my company's websites . Credit is due to this artist and original model for the majority of the silhouette of this model. However, I have…
This is a remix of another Pinecil Case adapted to contain the Pinecil, the official cable, the official mini stand and 4 short tips. This case is smaller than the original model because only compatible with the Short Tips. The hinges are…
This is my Gridfinity-compatible Pinecil holder with storage for 5 tips and a lid. Made using this Gridfinity Add-in for Fusion 360. The bins have little grooves on the inside, so the lid snaps in place and stays on. The V24 version has…
Summer is at our doorstep. At some point, I thought of making a small pocket fan. But after it was built I thought there was more potential. Not only does it keep me cool, but it also cools my camera during summer outdoor use and can also…
0-waste: a multipurpose robot This kind of remotely controlled robot is highly appreciated for its easy of use, low mantenaince and cost effectiveness. Although not particularly advanced, it is often preferred to more sophisticated…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I was noodling around with organizing cables and came…
Rozměry jsou přibližné podle fotografie originálního nástavce. Zajištění pomocí šroubu M6. Matice lze vsounout volně, hlavu šroubu je lepší nahřát vtisknout za tepla. Vítám případné připomínky, udělám změny :) Tisk bez podpěr.
After making a mini bottle cap container I thought maybe a bit bigger one for various small parts would be handy, and there's also space for some nice knurling for great grip. Maybe use different cap colors/brands to indicate different…
This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…
I designed this basket so that it can be used for different things, I use it in the office, in the living room, in the kitchen and in all the places that my wife allows me :) This model started from a very basic object and after edit so…
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
I printed from PLA and PETG. To save filament you can reduce the density of the filler to 5%. You will need external material to make it up. You need a wire (one that won't break when bent) that you attach to the underside of the liner…
Currently very frequently used anti-personnel mine in Ukraine. It consists of five parts. I printed from PLA and PETG. The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical…
3D Printed GPU Sag Support for Nvidia and Radeon Graphics cards. GPU sag is no longer a problem with the 3D Printed GPU Sag Support. the model is easy to print, no support is needed, and the model is designed to save printing pop and…
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
these key caps can fit most regular key heads. Suitable for tagging your keys for quick identification or for a better ergonomics.
Hier kommt ein ganz besonderes Tool für kleine und große Mathematik-Fans: Unsere Fidget Spinner mit 5,5 cm Durchmesser vereinen Spaß und Lernen auf coole Art und Weise! ✨ Die Spinner decken alle vier Grundrechenarten ab – Addition,…
This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
Universal tool for taking measures and making marks on rectangular objects. Contains both metric and imperial units. Ideal for wood workers, but also usable on plastic, metal or many other materials. Also contains templates to mark…
Material : PET-G Support : Yes Infill : 10 - 15 % I printed from PET-G, but it will not be a problem to print from PLA. The layer height was 0,2 mm. It was printed only with supports on the printing pad! If you put supports everywhere,…
Simple 1-10 multiplication table printed in black and white PLA. Print instructions Printed in black and white PLA.
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
The next in line from my ongoing project of making articulated sharks is a blacktip reef shark. It's really cute and I really like this model, it's so nice. Model size: 208.5 mm x 77 mm x 35.1 mm This model is only for private use, please…
🧮 I designed a 3D-printable mechanical calculator that can perform ➕ addition and ✖ multiplication! Available in 2 Styles: 🔢 Basic Version Doesn't need an MMU or Prusa XL. 🐸 Froggy Version Print with multiple colours using the Prusa XL or…
A Yugoslav mine frequently used in the Yugoslav conflict of 1991-2001. The mine has both a trip and a pull safety. It belongs to the category of "bouncing" mines. When initiated, the mine is thrown approximately 1.2 m above the ground…
Spool holder for the IKEA Skadis pegboard. It can hold the sewing spool and a bobbin spool or can be used to hold the big overlock spools.
Mate tipo STAN para polimero escalonado, dimensiones y medidas exactas 20% de relleno 3 perimetros 3 inf 3 supe
A practical and durable redesign of the large Rugged Multipart Pinecil case , now featuring a completely screw-free assembly. This remix eliminates the need for additional hardware while maintaining the robust protection for your tools.…
This mine is the predecessor of the soviet PFM-1 mine known as the butterfly mine. Originally from the United States. It was used primarily in the Vietnam War. It was discontinued in the 1970s. Its design and principle was subsequently…
I set out to make a “Wedgie” sled for segmented turning but realized I already had made this sled based on the plans that came with the Microjig Zeroplay 360 Sled Kit. instead of cutting, gluing, and routing slots in some janky scrap…
Esta estantería modular está compuesta por módulos hexagonales individuales que se ensamblan entre sí por cualquier lado, formando una estructura tipo panal completamente personalizada. Diseñada para ser fácil de imprimir sin soportes y…
Updates 11/2025: Added a version for third party tips with 4.0 mm shank size (thin section directly behind the heating element at the front). The original Pine64 short tips come in 3.65 mm shank size, as do many third party options. But…
(The FESTOOL Multifunctional Table is shown just for example in above images) MFT3 TwirlBox - Ergonomic & Space-Smart MultiPurpose Tool Box Designed for Efficiency | Engineered for Precision | Optimized for Space The MFT 3 TwirlBox is an…
Description: A number of months ago I found the LTT Quick Bits Case from JH3D . I liked the design and even made one of the cases for myself. However, I didn't like that each bit set was not able to be stored in a single row in the case.…
I present to you a multiplication table that you can use to learn. It is similar to my other multiplication table: https://www.printables.com/model/1008700-multiplication-table-manual-calculator except that you do not need AMS to make it…
Stop your cars from moving on uneven surfaces with these 3D printed chocks. Available in 3 versions: 25mm – suitable for 1:64 scale model 30mm – generic version for Hot Wheels cars 40mm – for Team Transport trucks
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A tripod stand holder for soldering, mobile phone magnifier when soldering, or digital distance meter, holder for laser et cetera or … maybe a way to document your work by attaching a mobile phone/camera and take pictures along the way……
This 3D model represents a replacement protective tip designed specifically for the 4th generation TipToi pen. This tip ensures the longevity and functionality of your TipToi pen, providing a cost-effective solution for maintaining its…
6" Threaded Riser Extension for BORA's Centipede collapsible work stand system. Threads directly to work stand and raises worksurface from 30" to a more comfortable 36". Extension is compatible with factory attachments and fittings. You…
The Star profile allows a better stress distribution for a hex bit. (there is an improved MKⅡ Version here )
I bring you this amazing Planter from Nintendo World in 2 colors for single extruder printers! Super easy! Great size at 100%, 10.7 cm tall, but can be scaled up with no problem. It has 3 sides with the Question Block. Includes draining…
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
![#0195 Charging Cable Organizer [Multiple Sizes]](https://media.printables.com/media/prints/1167729/images/8797425_e01454a6-8f70-4158-87bb-164bded8b240_40e80181-6dde-4f5d-8a71-7f370698d27a/rl-20250127-015.jpg)
