Skadis Holder: Pinecil/TS100 Soldering Iron Tips (uses heat set inserts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Skadis holder for Pinecil or TS100 type soldering iron tips, using heat-set inserts and printed hooks for mounting
- Ocena
- 3,5 / 5
- Polubienia
- 35
- Pobrania
- 110
- Wydruki
- 2
- Wyświetlenia
- 1910
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage.
Nice companion for mounting above the Skadis Pinecil holder/soldering station: https://www.printables.com/model/287837
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.
Required Parts
- Printed hooks
- See linked project for more details
- M2.5 heat-set inserts
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- Prusa Eshop ($11.99, 100 pcs)
- CNC Kitchen Store (€9.99, 100 pcs)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- M2.5 screws
- McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)
Printing Notes
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.