Liczymy pasujące modele…
A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608…
Some cheap Amazon 5525 barrel jacks are a little loose on the Pinecil causing a weak connection. This is a boot to help secure the connection. The part is to be printed in TPU. I have found it to work using the following barrel plugs.…
Modification of the Rugged Box (Parametric). It fits the inside parts of the Rugged Pinecil XL case. And uses screws of 30 mm length.
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
A compact (1u x 3u x 3u [X Y Z]), stackable Gridfinity bin for your Pinecil and Heat Set Insert tips. Heat insert tool holes have labels which can be printed in a contrasting color for higher visibility. The tip bin can hold up to four…
This is a completely redesigned case based on the standard parametric box that most designs use. One of the biggest issues I noticed with other cases is that the Pinecil display faces upwards — meaning if the case doesn’t close properly,…
I like to have to ability to take a decent amount of soldering stuff with me when I travel, or go to conventions, drone races, camping, etc. The Pinecil (or TS100) are amazing and work super well. The case has a slide top, which slips in…
Here's a remix for the SOLDR kit, in case you use a Pinecil V2 instead of the Aifen A11, like me. I left a hole in the front part so you can access the screw to swap soldering tips. Note: I am a late backer, so I have not received my…
A sturdy stand with space to store additional soldering utilities for the Pinecil soldering pen. All parts are aligned as they need to be printed. The small holder may require some support. Depending on the printer settings and precision…
Pinecil Gridfinity stack that can store your soldering iron, 5 tips, cable, stand and other accessories.
This is a stand for pinecil v2 soldering irons. It's advantage is that it is a real stand so it holds your iron in place conviniently unlike the cheap one made by pine64. Assembly: The project uses m5 screws in varying lenghts. One is…
This is a container made to hold Pine64's Pinecil. It is modelled based off of measurements of my Pinecil v1 and is intended to hold both the Pinecil and one tip. It has a footprint of 1x3 and a height of 3u. I had success printing on my…
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
Modified the soldering iron holder to fit original Pinecil. Designed to fit neatly on a row of six squares where four half squares are still free for other accessories. Still uses Soldr's original iron holder base.
This is a holder for the large version of the Rugged Multipart Pinecil/TS100/TS80 Case (V2) . The rugged case simply snaps into the holder and sits on the upper hinge. This holder is compatible with the openGrid/multiconnect system by…
Repositions the Pinecil stand clips for Pinecil Holder compatibility, based on the Easy-Access Stand remix.
Case for pinecil solder, 7 tips, three reels, amtech flux and piston, sucker, two compartments with lid and one big
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
I made this remix to fit two inserts in the top and my powerbank in the bottom piece. You can either fit two inserts next to each other in the top part or use the dual width one i made. The one i made allows for a sligthly longer cable…
An insert for a Sortimo L-BOXX Mini to store security your PINECIL Soldering Iron including some accessories. I purchased the PINECIL with the Power supply as a set at AliExpress a while back. Power Supply Model: XY-1389 C+A65W, it has a…
I did: 3 Walls 15% Rectilinear Infill 4 Top & 4 Bottom Layers 15% Grid Infill I did not find a brim necessary.
This Pinecil Case is designed for make it mobile. With a power bank in it you can solder wherever you want and no longer need a power socket in your area. You can place following attachments in it: CNC-Kitchen Soldering Tips & Adapters, 4…
Pinecil soldering iron desk holder. Features a top and bottom section, where you can store the silicon USB lead and also the little lack support holder. Printed in standard PLA on fast mode. Have also attached the original Fusion file in…
Fixed base model weird mounting options, for regular hex slots. Needs empty adapters from original honeycomb wall publication. I resized it for pinecil v2, I don't know if it will be good for v1 or any other similar tools.
A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608…
2 Bin variants, both are lower profile, one has walls high enough for stacking. I want to maintain the quick access dogma of gridfinity, thus I added finger windows, a facilitation of gesticulation defenestration while preserving…
I already have storage for my wicks/spools, so I figured I'd replace that space to actually get some use out of those free screwdrivers I've amassed about 20 of. Now that the screwdriver moves with the iron, I won't forget it and be left…
This case features a modular design of the original Rugged Multipart Pinecil-Case. No need printing this huge inserts anymore, thanks to velcro straps. Benefits: Completely modular, through the use of Velcrostraps Different Soldering…
I wanted to equip my TS100 Case with the inserts from jamie xu and Char to accommodate both my desoldering pump and my CNC Kitchen Heatset. Unfortunately, the TS100 collides with the stand holder due to the customisation of Char , so that…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. Milwaukee tools have internal electronics that signal the…
A simple box for holding your Pinecil v2. It has slots for up to 10 short tips (one that comes with it, one that comes with the insert adapter, and both fine and normal sets). The power supply shown is the Anker Nano 2. Has room to hold…
Onshape link: https://cad.onshape.com/documents/669d8ab3ba28c9b4524ab2e6/w/aef33c5d4f0e49661ce8afa3/e/09eb626dace08d21ae3c6973?renderMode=0&uiState=670aa99a73e99d0f1216ec99 Based on…
My take on a pinecil holder for the Skadis pegboard from IKEA. This holder features both a tidy storage option for when the soldering iron is cold and a heat-resistant holder with a 608 bearing for when it's hot. It also features two…
Pinecil Tips Gridfinity bin made to be as compact as possible. It manages to hold 5 short tips in 3x1 2U high bin and still be stackable according to Gridfinity Standard. Made to fit in my Omnifixo inspired storage box , but should fit in…
Pinecil Gridfinity bin made to be as compact as possible. It manages to the soldering iron and one tip in 3x1 3U high bin and still be stackable according to Gridfinity Standard. Made to fit in my Omnifixo inspired storage box , but…
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. DeWalt tools have internal electronics that signal the…
Securely holding the bearing @@ omgwowbbq
This remix features slightly more ergonomic cutouts to make it easier to access
Gridfinity bin for 4 soldering tips. Size 3x1x3.
Fits one Pinecil soldering iron. Prints without supports. Uses full-size T-Clips . Maintains its orientation on the Skadis board via a protrusions on the back that slot into the Skadis holes. Designed in OnShape .
Double Pinecilv2 and tips holder. Compatible with CNCkitchen set for TS100, TS101 & Pinecil https://cnckitchen.store/
Remix of Sweet1227's Gridfinity 1x3 Pinecil tip holder but made shorter (3u), adds wall so multiple can be stacked while full of tips. Holds 3 tips.
Remix of Sweet1227's Gridfinity Pinecil iron holder made smaller (1x4 instead of 1x5) with heat set insert storage. No outer lip or solder pocket. Heat set insert copper tips rearranged and labeled. Fits iron with short heating element.…
I purchased a soldering iron holder from Amazon, but it was slightly too wide for my Pinecil. The simple cone, however, has two cutouts specifically designed to fit the Pinecil size on a standard soldering iron holder. Supports recommended
I do not have that many spare tips and wanted to use the tip compartment in the top insert for something else. So I created this insert which has a space in the cable compartment for one extra soldering tip. Also check out my slightly…
I do not have that many spare tips and wanted to use the tip compartment in insert to store some tweezers which I use quite often working with small electronics. So I created this insert which has space for two ESD tweezers instead of the…
Horizontal Pinecil & ENGINEER SS-02 Insert for Rugged Case. Needed an insert to hold both a Pinecil & ENGINEER SS-02 Solder sucker. Found two models: A holder for a Pinecil (Horizontally) and it's cable. A holder for a TS-100 and SS-02.…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. Kobalt tools have internal electronics that signal the…
HookJab's design is great, but I use my pinecil on the go frequently so it lives in it's travel case but I use the heatset inserts less frequently and rarely away from my work station. I remixed the design to make it more compact, and…
Updates 11/2024: Added a “wide” version with 50% wider base. This is what I use now on my Pinecil and what I would recommend. Description A small but very effective anti-roll foot and mini stand for the Pinecil. It simply clips on and…
This is pretty much for my own use, but I figured people might also have the same soldering iron & omnifixo combo and want to easily carry some basic stuff with them. I set the compartments this way to be able to store extra soldering…
This is a compact, Gridfinity compliant, soldering caddy. It accounts for the placement of: Pinecil (version 2) Pinecil Short Tip Set (Gross) CNC Kitchen's Soldering tips for threaded inserts Weller Soldering Brass Sponge Tip Cleaner with…
Print in PETG as 3 separate pieces. Color transitions are optional as an aesthetic choice. Has fold-up stand for use when soldering, and the tip storage slot is designed to accommodate 2 tips facing opposite directions. Coil small amounts…
Stand for smaller soldering irons such as the Pinecil or TS100. Uses a standard skateboard bearing (22mm outer diameter x 8mm inner diameter x 7mm thickness). Bearing is press-fit and no supports are required. Fits 65mm diameter tip…
This is a gridfinity bin for a pine64 pinecil soldering iron and the tip that comes included with it. It is a 1x3 gridfinity bin. It comes in a normal variation, and magnet and screw variations. If you want to edit it you can download the…
Changed the mount to go on top of the cleaner Category: Tool Holders & Boxes
This insert is highly subjective, but was made to house a set of heat insert tips for the Pinecil soldering iron, an Amazon Basics Power Supply, Flux Pens, and still have some additional room. Flux Pens:…
This is an adapter I made to hold my Pinecil v2 in a cheap stand I bought on amazon. I added a hall effect to my Pinecil so one version has a holder for a 8mm magnet. It has holes that you could use screws to attach the holder to the…
This is a remix of the Multiboard pinecil holder . I moved the pushfit from the bottom to the top so the weight of the object would push against the wall, not from it. Because of that, it needs to be printed upside down to print the…
This is a remix from the Functional Print Friday's Youtube channel of a cordless battery adapter for a Pinecil soldering iron. pretty snug fit to the battery, print laying down (xt60 side up) fits stand from :…
Some cheap Amazon 5525 barrel jacks are a little loose on the Pinecil causing a weak connection. This is a boot to help secure the connection. The part is to be printed in TPU. I have found it to work using the following barrel plugs.…
Redesigned from scratch in OnShape. Feel free to edit the public files ! Gridfinity 3 long by 1 wide by 3 high. Fits the CNC Kitchen set, but maybe others too? Printing: No supports needed. I printed this in PLA with a 0.4 mm nozzle and…
Adapter to seat T12 soldering iron tips into the Pinecil. Remixed from kohkoh's model, this adapter is extended 20mm to put the grip closer to the tip, giving the user greater control. It's recommended to print this from a material that…
I recommend printing the parts as oriented in the provided STL files. The mount is designed to fit only the short probe tips, like in the original model. Magnet holes have been removed, and small dimples were added instead. Recommended…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
I liked the 9 tip holder, but found the tolerances were too tight, making it hard to get the tips removed, especially with one hand. So I rebuilt it in Fusion with the Gridfinity Refined base design and loosened up the tolerances. I also…
Printing with PETG gives additional flexibility that makes putting it on/off easier. Take off the silicon sock before attaching the adapter.
I unfortunately managed to crack my Pinecil shell body by awkwardly catching the barrel jack power lead. A replacement shell is only US$6, plus postage and GST, the price quickly adds up. Surely someone has made available a 3D printable…
Created a simple gridfinity-compatible bin to hold the seven threaded insert tips that are available for the Pinecil. It is meant to be used as an extension to the base of the Pinecil and Tip holder by @Waschtl . (So the setup allows for…
Pencil holder for Multiboard with 16 slots for storing soldering tips.
A simple remix of @Jonasz_1632901's pinecil and ts100 skadis mount to work with the t-nut mounting system designed by @6d6178 The original never felt that secure and would fall off when removing the iron sometimes, hence the remix.
hi, i was looking for a pinecil compact and practical case to carry around. i took inspiration from Drew at printables.com/model/188072 but with improved functionality and easier to open/close safely. I always wanted to play with tpu and…
This is my first attempt at modeling something. I wanted a case that could fit at least 10 SHORT tips + all of the aliexpress brass heatsets. This includes a slot for the M2.5 heatset. It can hold up to 4 standard length tips, 2 near the…
I never had any male spade connectors, but I did have many blade fuses so took the blades from one of them and reshaped them to work. See picture 1x M3 heat insert for the holder 6X M3 6mm screws
Soldering iron stand for Pinecil v2 made of 2 bearings D22x7, beer lid D28x7, sponge 50x40x5, copper sponge D34 and a little 3d magic The model has been completely redesigned: It now supports long and short tips. Added a hole for a copper…
This clip was made for the reel from Pinecil, TS100, TS101, TS80 & TS80p Case with options, Stand, Solder Reel, Storage Box . You may also want to try Stronger Spool No Supports by @crashkg , instead of the original.
This is a case I created to hold the PINECIL V2, PinePower 65w wall supply, a small USB cable, the PINECIL Soldering Short Tip Set (Fine) and an Anker 323 USB-C Power Bank.
What we will need: - 6x M3x20 screw - 1x M3x14 screws - 1x M3 hex nut - 1x 608 bearing - All printed files (soldering wire spool; clampers are needed 2 times) - Glue (optional) Assembly Instructions for the Pinecil V2 Box - Insert the 608…
What we will need: - 6x M3x20 screw - 1x M3x14 screws - 1x M3 hex nut - 1x 608 bearing - All printed files (soldering wire spool; clampers are needed 2 times) - Glue (optional) Assembly Instructions for the Pinecil V2 Box - Insert the 608…
A soldering iron stand for the pinecil. Fits snugly around the bearing and the collar. The ring is a little fragile and prone to cracking. Requires a 22mm bearing.
Updated models for the soldering iron grip of the @AdamVector3D 's VLMP Heat Seat Insert Press to fit Weller WES51 (the black grip in the pictures) and Pinecil V2 (the yellow grip in the pictures) soldering irons. The parameters for the…
1x1x6 Gridfinity Stand for the Pinecil Soldering Iron from Pine64. Fits for both Verisons 1 and 2. Printed in White PLA with 1.8mm layer hight on the Elegoo Neprune 3 Pro Remix from the solid Gridfinity Boxes by @jdges
Simple Ikea Skadis mount for the Pinecil V2 soldering Iron Link to purchase the iron here - https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/
Small remix of the Pinecil v2 Case, that contains the Pinecil v2, the official cable, the official mini stand and 4 short tips. Hinges are print-in-place design. I had to glue the insert in the box because it's a bit loose otherwise.
4-tip insert with spools for rugged multipart pinecil
Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating multiboard/multibin/multipoint . Made with FreeCAD. My first attempt at…
Modification of the Rugged Box (Parametric). It fits the inside parts of the Rugged Pinecil XL case. And uses screws of 30 mm length.
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
I have a Pinecil 2, a Engineer SS-02 solder sucker and a PD battery bank so, this is a all in one station for it, on one side is a aluminium tube that locks in place either folded away, or up at an angle to hold the hot iron. Freecad…
This is a remix of spTim's fantastic soldering station for the TS80p. I have a Pinecil soldering iron, so I made a bunch of updates to the original design so that it will work with the Pinecil. iron holder - Pinecil.stl I updated this so…
Found this great model for CNC Kitchen's heat-insert tips for the Pinecil/TS100, however Pinecil's official heat-insert tips have an additional M2.5 insert. So I adjusted the holes to store all of the tips in this set. I also adjusted the…
I purchased a Pinecil V2 and wanted a case to store the soldering iron and accessories. I also wanted to be able to use it with the Anker 737 Battery Pack due to the compatibility and ability to use it on-the-go if needed. I removed the…
Original model was modified for magnets 6x2 mm. The inscription has been changed to TS101. https://www.prusa3d.com/cs/produkt/ts100-101-soldering-adapter-tips-set/…
a simple case for the pinecil case. The fit is ok but not 10/10. You will need to cut the pins short on the underside.
I first wanted to add a gridfinity base to Termiman's Pinecil holder, but I couldn't get it to work nicely and it didn't fit the gridfinity dimensions well. Then I realised it would take up less space and fit almost exactly into a 5x1…
A case for the Pinecil soldering iron with space for 5 extra tips, the mini stand and for the press in adapters for inserts to have all in one place. 2 versions of the lid, one for the additional cable buddy and one that fits normally.…
![Pinecil v2 soldering iron stand [not recommended to print]](https://media.printables.com/media/prints/b180ae21-b21d-4045-8308-0940fa78631c/images/11921014_3c04f913-e5a6-4333-a850-a44a283a5e3a_02051d58-2548-4603-a61b-72b1a25791a8/ff5b5446-9661-490b-8502-9e28952775a7.png)
