Parametric Spool for Pinecil Case (or anything else) - Fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a one piece spool for the Pinecil case by Termiman. It is parametric so can be used for other things too.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 368
- Wydruki
- 6
- Wyświetlenia
- 1951
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametric solder spool that I originally remodeled for the Pinecil case created by Termiman (which is a remix of a remix of a remix from what I understand). By adjusting parameters within the included Fusion 360 file it can also be easily modified for other applications.
The original spool is glued together, but it came apart easily for me, so I decided that printing it as one piece would be better. I printed a one piece model from Thingiverse, but it broke pretty quickly because the walls were very thin and the layers seperated; I was using filament that didn't seem to have great layer adhesion to begin with. Finally I created this model with slightly thicker walls and so far it seems to be holding together better.
Although I remodeled it from scratch, I did base it on the original spool, so it should look almost identical.
This WILL need to be printed with supports turned on.