Liczymy pasujące modele…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
Onshape link: https://cad.onshape.com/documents/669d8ab3ba28c9b4524ab2e6/w/aef33c5d4f0e49661ce8afa3/e/09eb626dace08d21ae3c6973?renderMode=0&uiState=670aa99a73e99d0f1216ec99 Based on…
This is an insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) by PjotrStrog. I modified the original TS100_Pinecil Top Large A insert to fit 4 tips instead of 2. For this I needed to make the cleaning wool compartment smaller,…
Modified the inserts to hold an Anker Nano II 45W charger brick and tube of MG Chemicals solder wire. Dimensions of trays and case are different, so it is not compatible with other models. Does work with soldering iron stand accessory.
Customized version of https://www.thingiverse.com/thing:1246651 Instructions Using the following options: LargeEndMeasured = outside LargeEndDiameter = 57 LargeEndLength = 15 SmallEndMeasured = outside SmallEndDiameter = 38.5…
This is a holder for the large version of the Rugged Multipart Pinecil/TS100/TS80 Case (V2) . The rugged case simply snaps into the holder and sits on the upper hinge. This holder is compatible with the openGrid/multiconnect system by…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Securely holding the bearing @@ omgwowbbq
This is a magnetic holder for a TS80 soldering iron. Version History Version 1 - Soldering Iron Holder.stl This version uses a pair of 10 x 3.5 x 2.25 mm N45 Neodymium magnets in the base of the print to attach it to a suitable surface. I…
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
Synopsis This case is designed to be the most efficent way to carry your soldering iron encapuslating all the key features it is a case a way to carry and dispence your solder and a soldering iron stand it fitts perfectly in to the large…
Gridfinity box for your TS80 and two soldering tips. There is an extra place to store a soldering tip while it's cooling down
I first wanted to add a gridfinity base to Termiman's Pinecil holder, but I couldn't get it to work nicely and it didn't fit the gridfinity dimensions well. Then I realised it would take up less space and fit almost exactly into a 5x1…
4x.5 bin for ts80p soldering iron, 3u tall, non stacking Easily get the iron out by pushing down on the tip.
I got a new soldering iron the TS80P and decided to make up a quick case thats sturdy and tough and keeps the iron tight in the case to protect against being tossed in a bag. The case accommodates (one) TS80P Soldering Iron, The one I am…
3D-Printed box for the TS802D sending card from linsn. Both parts are fairly thick, and the PCB is sandwiched with some cutouts for components. There's also a hole for DC jack (locking or not) that can be plugged into either the small JST…
Housing for Miniware TS80P soldering iron. The housing can be printed with the filler separately, both in the version for flexible materials, where there are smaller tolerances so that the soldering iron does not fall out and holds well…
Remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the medium size lid for TS100 and TS80 users.
Remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the small size lid for TS100 and TS80 users.
Insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) with space for: copper wire one spool of solder the solder iron stand one tip two helping hands Print instructions Layer height: 2mm Material: PLA No supports needed Additional…
A custom case for the TS80 soldering iron and two tips.
I was looking to make a soldering station for my new TS80P Iron. I found awl13A's holder and it does an extremely good job of holding the iron so I modified its base to fit my station. The holder swivels and has a hole for a 3mm locking…
Glue required. Also some magnets to better hold cover, but not 100% needed.
This is a custom insert for @PjotrStrog’s Rugged Multipart Pinecil/TS100/TS80 Case (V2) . It’s designed specifically to fit the TS/T65 Heat Insert Nut Kit for TS101/Pinecil soldering irons. The insert design is based on @irwtdvoys’s Tip…
This is a lid for some of the Rugged Multipart Pinecil/TS100/TS80 Case (V2) inserts. It is for inserts with a small generic space, see the pictures above for that I mean. Print instructions Orient it sideways, use a brim and enable vase…
Parts required - 608z metal bearings x 2 10mm x 40mm strip of breadboard/copper clad board x 2 12V to 9V 3A DC/DC duck converter (should be actually rated for an input between 11 and 22 volts, I used this one -…
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
This is a remix of the rugged Pinecil/TS100/TS80 case by @FabLabDesign (linked above). My version keeps the same internal tool trays from the original design , but adapts them to fit into the STOREHOUSE 20-Bin Medium Portable Parts…
Compact Case for Miniware TS80P soldering iron with 2 tip slots. Use 1.75mm filament as the hinge pin.
This is an adapter for the generic holder I bought on amazon. I printed with a stiff tpu filament. No clue how it would work with a ts80 non P iron, buts it also fits a Hakko iron, but not as good. This was the holder I had bought from…
I liked @Alvaro492's Blank Insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2), but I wanted it to be double height for storing miscellaneous soldering supplies. Tested with @tjb1's Double Layer Rugged Multipart…
Inserto per supporto saldatore standard per saldatore portatile TS80P. Il saldatore portatile USB-C TS80/TS80P ha un profilo molto sottile e non si adatta ai supporti standard che prevedono un diametro più grande. Questo inserto consente…
I wanted to make a few new inserts for the excellent case by @PjotrStrog, but could not find a simple blank insert I could subtract insertable items from. So I measured a bottom large insert, created a cube of the measured dimensions,…
While making the inserts for my PICKit 3.5 and PICKit 5 there was also a need to store both USB-C and mini-USB cable in the rugged box. Can also be usable with any other tool that fits the large rugged box by PjotrStrog .
This is a holder for the large version of the Rugged Multipart Pinecil/TS100/TS80 Case (V2) . The rugged case simply snaps into the holder and sits on the upper hinge. This holder is compatible with the openGrid/multiconnect system by…
Modified the TS80 holder to have a recessed screw hole for mounting to vertical surfaces. 4mm hole with 8mm recess. Remixed from: https://www.thingiverse.com/thing:3451921 Category: Tool Holders & Boxes
I was looking for a small footprint soldering iron holder for the TS80P, and most other options seemed unstable or needed additional parts. I found this version to have the most satisfying fit for the iron, but I wanted to make the whole…
Holder for a TS80P soldering iron and 4 tips. Remixed from: https://www.thingiverse.com/thing:4631801/files
A "small" remix of Kitlaan's Soldering case. Slightly modified for European power supply and more tips :-). It is use for: The TS80P soldering iron + tip 3 additional tips European power supply USB-C cable Grounding cable Hex L key Like…
Remixed jcobgad's original design to fit a TS80P iron Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Real PLA Black Post-Printing ============= Category: Electronics
This is a remix of sarf2k4 https://www.thingiverse.com/thing:3300590 big box with the divider modified to allow clearance for the larger diameter of the TS80P. I included all the files for the big box. My Meshmixer file is available at…
I decided to make one because others doesn't suit my liking. I also wanted to house 'everything' in this single case without leaving out something else, while I don't have a soldering iron holder, I decided to incorporate into this as…
A slim simple case for the TS80 Soldering Iron, that holds the iron itself and any two TS80 tips. For the lid, you can either print the text to have a 2 tone color look, or print without the text for a debossed look. M3 screws are used as…
I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…
A TS80 collar that can be used on the TS80P for those who don't like the tapered collar that comes with the TS80P. I printed this on my SL1S, and would suggest to use this on a resin printer. I oriented the part vertical with the threaded…
A TS80 portable "wireless" soldering iron stand for use with black and decker batteries. The orange and black battery is a original one, the big one is a cheap knock off (40 Eur.) Super handy for use in the field. The battery clip can be…
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Primarily based on the excellent TS100 case by Oleg Vint (Olvin)…
This stand can be attached to the widely used Copper Wire Cleaning Box("ball" diameter is 70mm) with two magnets(8mm diameter, 3mm height). It can be moved around(from horizontal to 45degrees in any direction) but it still keeps in…
A stand to place your TS80 soldering iron. I will be very stable as is, but you can weigh it down with some heavy stuff stuck to the underside. I used a sheet of thick lead. The .stl doesn't represent the correct bed orientation. Sponge:…
A storage case for the TS80P soldering iron by Miniware. The case has space for the TS80P soldering iron and five interchangeable tips, as well as a couple storage areas for a USB-C cable, tube of solder wire, or whatever else you can…
Added a different charger and removed the grounding cable, so there could be a small apartment instead.
Those 3x1 Gridfinity Boxes will either hold your TS80 or TS80p Soldering Iron and a Tip or just two extra Tips. Note that I redesigned the base of the Boxes to save some material. You should be able to print that without Support even if…
Modified the stand to hold a smaller (16mm outer diameter) bearing. Reason being this was the bearing I pulled out of a giveaway fidget spinner I found lying around. This does have a smaller hole so the tip will be in the bearing instead…
Just for the TS80 base and two tips. In my point of view the smallest possible case. Protects them very well because there is at least 2mm of material all around. Size: Length 105.6mm / With 50mm / High 19mm If the case is taff to open,…
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
Storage box for the TS80P soldering iron with 3 or 4 tips, cable and power suply. As improvements, this can be printed separated and assembled with an M3 screw as hinge.
I wanted a small box for my TS80 + the accessories I need. I decises that I did not need to include the power brick because the TS80 can run from the same power supply as my laptop. The body fits: 1 TB80 2 tips Mini T-Stand (…
a shell to repair a ts80 soldering iron, if the thread broke off
Stores my soldering irons, tips, and accessories. Two versions available, for 1 iron and 4 tips or 2 irons and 6 tips. Might make an alternate version that is more self contained for portability. 65mm x ~120mm x 43mm with 2.5mm wall…
This is a system I devised in order to keep all of my TS80 soldering iron pieces and accessories together so that they dont get lost or misplaced. All of the clips are really easy to print without support (except the power cord clip which…
Version 2 found here: https://www.printables.com/model/205121-ts80-case-slim Just a small and simple case for the TS80 Soldering iron. When printing please flip the lid as it is designed to print upside down. I have included the STEP and…
The lid takes nearly 3 hours to print. It prints with no suports and defualt settings 20% infill you know the drill. This intergrated solder dispencer was desighned to solve the problem that i carry far to much stuff in my ltt workshop…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
I wanted to have a case to fit all of my TS80 components, including the cable, that is really nicely fit arount the perimeter of the case. What fits inside the box: soldering iron 2 soldering tips soldering iron stand power supply (EU…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
These inserts allow use of the TS80 soldering iron and tips in the Rugged Multipart Pinecil/TS100 Case by PjotrStrog . These inserts are made from components in that design and TS100, Pinecil, TS80 & TS80p Case with options, Stand, Solder…
Did not include the seal or the soldering iron model. The fit is spot on (in my opinion), on the firmer side, can be adjusted by heating the inserts. I printed it in PLA+, and I am pleased with it :) Hope it helps you. Cheers! :)
Simple organizer for holdering TS80P soldering pen with its adapter, cable and up to 4 tips. Features Everything holds tight enough even when organiser is flipped. This is useful when organizer is used as infill for some kind of…
Needed a case that I can keep in a different place than my work area. It is bulky so will not fit into a backpack, unless it is large. However, does keep everything together. This will hold the USB adapter, flux and wick, solder tubes and…
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
Holder uses 608 bearing, M3 Square Nut and Bolt.
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here:…
I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…
Wanted to squeeze in syringe with flux, spare tip and power cable, but there was no such option, so I made a remix of inserts. It' compatible with PjotrStrog's rugged case and it's only for TS100.
Just a smaller version of the nice TS80P case by Pieterv24 and jcobgad. Small iron likes a small box. It uses 5x2mm magnets to hold the lid closed. I also added the step files, so you can go crazy. All kudoos should goto the original…
Stand for the TS80 with a solder spool holder and space for a tip cleaner. The iron clips securely into the stand but can be easily removed. No hot part of the iron comes into contact with the printed part.
You will need to print 2 of these. If you are only printing 1 at a time, make sure to up the part cooling for the last point as it will go gloopy otherwise. I glued these to the case but if someone can make a better one I'd love to see…
Changed the parts around latches to make them easier to reach
Holds a .625" diameter x 5.2" long flux pen and a 1.8" diameter solder wick, both easy to get on Amazon.
Top large input for rugged Pinecil/TS100/TS80 Case (V2) with space for fluxpen diameter 12mm with solderin iron holder space and two spools of tin. Exact fluxpen: Here on TIPA Also should work with everything with diameter 12mm and length…
Soldering iron stand for the TS80P soldering iron. The iron can be dropped in and retained, even with a heavy cable pulling it down it remains seated and will tip the entire stand before removing the iron. ( Although once tipped the iron…
Case for TS80 soldering iron: includes space for single tip, solder spool, brass wool and a small stand to rest the soldering iron on. Print Settings Printer: Tronxy XY-2 Pro Resolution: 0.2 mm Infill: 10% Filament: PLA Assembly Four…
Case for TS80 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Also have a look at my Fume Extractor & TS100 Case UPDATE v29: Fixes based on input from @4nthonylin . Moved soldering…
TS80 Soldering adapter for power supply case with USB QC3.0 output: https://www.thingiverse.com/thing:4521874 Very often when I need a power supply in my projects is also involves soldering, therefore, I have incorporated a QC 3.0 USB…
This is a remixed large lid for the rugged case (V2, Large parts). After printing my first pinecil case I thought it would be a good idea to pay tribute to an old handheld from the past. I just added “SOLDER BOY” to the lid and printed it…
its a small modification to accept a larger nut (because its what I had to hand)
A case and and soldering station for the Miniware TS80p soldering iron. The case snugly fits the soldering iron handle along with three tips. The soldering station accommodates a spool of solder, brass wool tip cleaner, USB-C power cord…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
A holder for a soldering iron like the pinecil, ts100 or ts80 using a copper cleaning sponge as ballast. Pro Tip: Use double sided tape to secure the sponge container to the base. As it is the ballast, the holder will fall over if you…
I created this project to be able to solder without the need for a power supply. It provides the soldering iron with enough voltage and power to unlock its full potential. This case holds 10pcs 18650 batteries, BMS, XT30 socket and DC 5.5…
I love my TS80 soldering iron, and I love my IKEA SKADI pegboard! It holds a TS80, 2 spare tips and a Solder Pig. If you enjoy the things I produce, buy me a coffee . This was inspired by @PROTONORD 's IKEA SKADIS TS80 p soldering iron…
I've printed it with pegs down, and pegs up — they both work great, but I'd recommend pegs down so that the visible surface when mounted is ‘pretty’ without the bridging visible.
Just updated name to TS80P as the original says TS80 which triggers my OCD ;). All credits to the original poster.
