Heat Inserts mod for Rugged TS80p Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I improved the hinges with heat inserts
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here: https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2. Please find there more trays (to fit Pinecil or TS100).
I used M3 heat inserts with 4.6mm OD and 4mm length. Please be careful when inserting them, since the walls of the hinges are quite thin. I heated my TS80p at only 180°C and inserted them slowly. I have also used six M3 x 20mm screws.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.