TS80P Makita Battery soldering station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a portable soldering station that utilises a Makita BL1815G compatible battery (18v) to power a TS80P soldering
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts required -
- 608z metal bearings x 2
- 10mm x 40mm strip of breadboard/copper clad board x 2
- 12V to 9V 3A DC/DC duck converter (should be actually rated for an input between 11 and 22 volts, I used this one - https://www.amazon.co.uk/gp/product/B087CKCFSP/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1)
- sponge x 1
- steel scrubber x 1
- small nuts and bolts x 2
- drill for the nuts and bolts (about 4mm) x 1
- USB C cable that you can cut or a USB C socket (I had a one sided USB C cable that I cut off a damaged charger)
Print in PLA, doesnt matter which layer height (I used .2mm)
Assemble the parts with Glue and the bolts.
Solder the IN side of the buck converter to the copper clad plates, solder the OUT side to your USB-C socket or cable.
MAKE SURE YOU PUT THE COPPER CLAD PLATES IN THE CORRECT POSITION, I.E. THE POSITIVE TERMINAL OF THE BATTERY GETS CONNECTED TO THE POSITIVE CLAD BOARD WHEN YOU CONNECT THE POWER STATION TO THE BATTERY
UPDATE
I have updated the design with some trim to hide ugly glue marks.
I have also added some storage on the left for my electric screw driver and on the right for a solder sucker or whatever you want.
Feel free to alter this for your own batteries and equipment. Enjoy!