1 / 3
TS80P Organizer & drawer grid system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for TS80P soldering pen, its charger, cable and 4 tips in total with compatibility for drawer grid system.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 1395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
Simple organizer for holdering TS80P soldering pen with its adapter, cable and up to 4 tips.
Features
- Everything holds tight enough even when organiser is flipped. This is useful when organizer is used as infill for some kind of transportation box. Thou everything still can be taken out without much effort.
- Compatibility with Ikea Kallax Drawer Organizer. Just print container 5x3. Keep in mind, that adapter is taller than container 5x3, so nothing can be stacked above this container at this moment.
Print settings
I tested with PETG.
- 0.4 mm nozzle & 0.2 mm layer height
This is what is on photos and works well.
- 0.6 mm nozzle & 0.2 mm layer height
Generally ok, but I didn't tested tolerances in last version for this print settings, so it can be either too loose or too tight. Probably usable, but keep it in mind; I know for sure that it's not precise enough to have good tolerances with 0.6 mm nozzle.