Liczymy pasujące modele…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
after i released my first HSW-holder for the ES15 , I got a few messages from people who said it broke for them - it didn't for me until I printed one from PETG HF, so instead of buying more filament, I decided to design a tougher one -…
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
This is for storing miniware tools and accessories 1.TS101 2.MHP30 3.DS211 4.PD adapter 5. USB cable 6.DSO probe
Grip piece to reduce the chance that screwdriver will slip in hand while impact driving the screws. Print instructions: Filament: 40D TPU (I used Fiberlogy MattFlex 40D) Layer height: 0,1mm (modify layer height of 0,2 Structural profile;…
Gridfinity box 2x4x4.5U for Miniware ES15 screwdriver Accommodates 15 standard 28mm bits and 10 long 40mm bits plus 2 bins to store unused ones. Tall just enough so bits doesn't interfere with box stacked on top. Two 4.5U stacks exactly…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
Yep, that's not the best model, but it works, feel free to modify it to better look. You might need inner diameter x-y compestation to fit your tip (I did 0.1 mm).
Remixed from @Alvomane's bit holder, with expanded bit slots for easier access and removal.
I made a USB-C mod for the Miniware ES120 electric screwdriver. The endcaps for Revision 1 and 2 of the PCB look nearly identical. Make sure to use the correct one for your revision. https://gitlab.com/XenGi/es120-usb-c-mod
Remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the medium size lid for TS100 and TS80 users.
Remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the small size lid for TS100 and TS80 users.
This 3D printed accessory is designed to facilitate users who have purchased the MINIWARE TS21 precision soldering iron
I liked the original version made by @51m0, but wanted a more secure clasp. I liked the clasp and hinge from the “Pill Box 2.0”, so I decided to try adding that in. Please get the bit holders from…
Additional hardware needed for assembly: 2x M3 nuts, pressed into the lid, to minimize wear from the plungers. 2x 5x6mm (Case Diameter x Height) spring loaded ball plunger (Bambulab FB004), pressed into the base for lid retention. Print…
A 2x3x3 Gridfinity bin for storing a Miniware T21 soldering iron, the CNC Kitchen C201 adapter & a full set of CNC Kitchen heat insert bits. There is also room for a spool of solder and an extra square compartment for misc stuff. Print…
i Just upgraded from the small rugged Box to the Big one from https://www.printables.com/@TheCafeRacer and i missed the Logo so i added it from https://www.printables.com/@Damian27 . Enjoy the remix!
Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.
This is an improved iFixit Mako bits insert for one driver and a miniware ES15 screwdriver Changed right recess to hold a miniware ES15 electric screwdriver Changed hexagonal holes to round holes for easier insertion Angled the bit holes…
Miniware TS101 & Tips shelf for Honeycomb Storage Wall Features Storage for TS101 Offset storage for up to 12 tips
This is a custom storage box for the OMNIFIXO M4 designed to keep the lid, holders, and essential soldering accessories organized in one compact place. The design features an integrated holder for the Miniware TS101 soldering iron,…
I want to make a case for my miniware ES15 i came with this simple design with minimum hardwares and its can be printed with 180mm bed. there is alot of options there ! but i have 3d printer to make it and same time to be stackable with…
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
Features: Holds 18 28mm or shorter bits (+1 with screw driver), design with 3mm holes at bottom to slot-in magnets if bit become too loosen. Hole to charge screwdriver when case is closed Hold 1 extended shaft Multiple slots to add magnet…
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
I needed an Organisation Stand for my three Tools. So i took my Fav Stand and expanded it with two nice looking Stands. Unfortunately both of them was way to tight. so i re-create both Stand from Sketch and fused with the Wiha Stand. ATM,…
Miniware TS-80P came in a paper box that get destroy/damage easily when you take out the soldering iron the first time. I made this case so that I can store the Iron and the mini iron stand that came with it. Eight 5 x 1.5mm magnets are…
A ruggedized box for the ES15 screwdriver meant for inserts made by 51M0 . This remix was requested for by another user. The box's interior dimensions are the same as the insert but with a +0.2mm tolerance. Latches and hinges are made to…
This is a remix of the large size lid of Pjotrstrog's remix. I just added the Miniware logo and TS100/TS101 indicator
Prints well with 0.4-0.6mm nozzle. No supports required. Infill ~20% recommended.
Been thinking of making a handle for this driver, so I built a model of the screwdriver. Pretty accurate, but couldn't figure a good way to finish the button, so it's been left flat.
I designed this only for my own needs and working scenario. If the design doesn't fit your taste please be kind with your words. If you like to mod it into what you need, there is a STEP file.
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
This stand is designed for an electric MiniWare ES15 screw driver. the inner hole is long enough to hold the ES15 with an extra bit inserted the outer rings take 30 bits in total (4mm type) the fit for the bits isn't too tight so they're…
I wanted a box to store the MPD-P906/MDP-M01 lab supply that had the same size & shape as my TS101's box. I couldn't quite get it the exact same shape, but the footprint is the same as the TS101 box. I made this to have a thin adhesive…
Making a few mods for my ES121 so i needed a 3D model to work from. Buy here: https://bit.ly/378e7dX Category: Tools
Remixed top cover to have sign/text with second color (need MMU2 or other multicolor)
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
I love my TS80 soldering iron, and I love my IKEA SKADI pegboard! It holds a TS80, 2 spare tips and a Solder Pig. If you enjoy the things I produce, buy me a coffee . This was inspired by @PROTONORD 's IKEA SKADIS TS80 p soldering iron…
I lost one of the buttons while repairing my tiny hotplate, so I decided to print a replacement. And this is the first part that I designed in FreeCAD, coming from AutoCAD and Solid Edge, this was a learning curve but I'm glad that I did…
I've printed mine in PLA-CF, PLA & PETG should work just as fine. this will need Support, for your convenience the 3mf file is setup for a Bambulab printer with AMS using PLA-CF + Support for PLA as interface. Update: I released a more…
The MHP30 is a great tool, but having 300c just chilling on my desk always made me nervous that it might be easily knocked over when using it, or by something tugging on the USBC power cable. This 1x1 base holds the MHP30 with a single M3…
This is a remix of MiniWare MPD-P906/MPD-M01 Rugged Case adapter for MiniWare MDP-L1060 Electric Load that is alone about 5mm thicker than MiniWare MPD-P906/MPD-M01 modules. I also made top and bottom +2mm to original so that they provide…
Miniware ES15 case bit holder with looser fit, 6mm magnet holes, and 32 holes
Description A small stand for handling larger PCBs on a MINIWARE MHP30. There is a hole in the middle for a 10 x 50mm wooden stick. I printed the base and screw from PETG and the feet from TPU (FLEX) material. Additional Parts 1x wooden…
Hello Everyone I am sharing a stand for an electric screwdriver from MiniWare ES15. It should be printed in the position shown in the photo in the gallery. When you complete the project, please share a photo and a comment. Thank you and…
Hello Everyone I needed a MINIWARE logo for my project but I couldn't find it anywhere so I decided to design it. It can be freely reduced or increased using the tools available in the slicer. When you complete the project, please share a…
It's a tiny model, so don't be afraid to use extra fine resolution. Printable in any material. This is just a quick draft and it will probably change in the future because I plan to use this ring as mounting point for different…
More space for your DS213. I found i very hard to fit everything in the original design, so i made a bigger box. It also fits every additional equipment and the manual. This is a remix of the orginal:…
I love my TS80P soldering iron and my IKEA SKADI pegboard! This print holds a TS80P, two spare tips and a Solder Pig. If you enjoy the things I produce, buy me a coffee . Print settings 0.2 mm layer height 15% infill 4 walls no supports…
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
A Gridfinity-compatible (2x5) bin for the Miniware DT71 LCR digital meter tweezers. Can fit the tweezers (with packing foam), charging cables, and extra tips.
holds two standard depth insert in the lid
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
Designed to work with a SKADIS universal hook: https://www.printables.com/model/926529-ikea-skadis-universal-tool-hook-peg-step-file-incu Print in the supplied orientation
The iFixit Mako Set bits are perfect, but I also wanted my Miniware ES15 electric screwdriver on hand. This is a remix inspired by the amazing @farmerde_905596 design. The lid didn’t fit, so I printed a TPU spacer, added magnets, and…
