1 / 7
Miniware TS-80P Storage Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Miniware TS-80P came in a paper box that get destroy/damage easily when you take out the soldering iron the first time. I made this case so that I can store the Iron and the mini iron stand that came with it.
Eight 5 x 1.5mm magnets are required to keep the top and bottom together. I marked the magnets before gluing them to the box to make sure that I glue them with North pole facing South pole. The cavity are a little tight, I press the magnets in with a vise.
Print setting is not critical, no supported is required. Enjoy!