TS80P Soldering Iron Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soldering iron stand for the TS80P soldering iron. The iron can be dropped in and retained, even with a heavy cable…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Soldering iron stand for the TS80P soldering iron.
The iron can be dropped in and retained, even with a heavy cable pulling it down it remains seated and will tip the entire stand before removing the iron. ( Although once tipped the iron will probably come out ).
Used M4 hardware (2xM4 Nuts + Bolts of your choice).
The hole pattern is inch spacing, I reused a cheap soldering iron stands base as the base of my stand, however, all you need is a base with 2 4.3mm holes 25.4mm apart to screw the holder into.
The stand has a lip that holds the iron in firmly with a cable pulling down on it, while also allowing the iron to be quickly and naturally 'dropped' in.
Category: Tool Holders & Boxes