3552 modeli
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers
Wydruk około 9,13 €–11,16 € nettoWstępna wycena jednego wariantu
A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Turn your workbench into a professional station! This multifunctional 3D stand is perfect for installing threaded inserts, soldering work, and micro-drilling. Ideal for those who want practicality, organization, and a flawless finish in…
Wydruk około 8,52 €–10,41 € nettoWstępna wycena jednego wariantu
I had a fan from a failed project and decided to use it for something practical. The fan grills are made from infill. I drilled the connector hole, but you can use negative volumes to create holes in slicer.
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
I recently got a soldering kit for Christmas, and I thought the buttons were a little bit boring. So I thought I might as well design my own. I modeled them in FreeCAD and then printed them on my MK4S with a few color swaps here and there…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
I made myself a little helper to more easily solder pin headers to sensor boards. The dimensions are perfect for use with arduino prototyping boards. I additionally shortened the pins of a 8x1 male pinheader in combination with a female…
Wydruk około 1,85 €–2,27 € nettoWstępna wycena jednego wariantu
Wydruk około 5,99 €–7,32 € nettoWstępna wycena jednego wariantu
I added the sppol later so it's actually in a separate file.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Remix of the Original Solder scroll to fit standard spools
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Infinity Spool Holders is a modular storage and management system for spools of wire, solder, ribbon, and more! Fully compatible with Infinity Bins ! Features: Infinite expansion vertically and horizontally Removable spool trays for…
This is another remix of the Thingiverse project of mordaha and remixed by Elektroarzt that I further optimized: use 1x M3x16 / 2x M3x8 screws with printed threads instead of M3x20 screws repaired Main.stl as the net was broken (it could…
Remix Changes: Removed the groove on the screw Removed the grooves counter on the body More tolerance on the body for the screw (0.5mm on each side). Compensation for bridgning. Removed the Holes in the nut as they serve only visual…
18650 accupack soldering/welding assisstant for accupacks up to 4x6
Original description 2025-03-07 Mainly, see lewosh's description . Changes: The charger board is replaced with this one . Note that it only balances two of the three batteries, so you might want to get a secondary 2S BMS . Also, note that…
Here's a video explaining the design: The 3MF is in 2 parts, I recommend putting them with their flat ends down on the bed and about 20% infill on an FDM. It really is very small: 113mm x 39mm x 19mm. I've made 3 of these, there was a…
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
For assembly, you will need an M5 x 90 DIN 912 screw with a full thread and a cable lug with a diameter of 3.9-4 mm (cable lug for a wire with an area of 6 mm2) or M4х16 DIN 912 screw with nut.
I improved the design to use threaded inserts, added a knob, and uploaded STEP files
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
Stand V2 Copper sponge and Long tips https://www.printables.com/model/1150956-soldering-iron-stand-for-pinecil-v2-long-tips
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a flexible and almost entirely 3D-printable soldering station. An essential companion for your soldering adventures. Want to say thanks with a one-time donation? Make a PayPal donation here! Edit: The tweezer attachment model has…
Why? I have a Parkside drill from the older 18V battery system, the new 20V system is not compatible. But there is an Action shop (France) close to my place where they sell cheap and quite nice 20V batteries for Ferm tools. How does it…
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Jan 11, 2024:] added a case that fits long…
A fume extractor is a necessary piece safety equipment while working with electronics. Soldering releases toxic fume from the rosin flux that evaporates. This fume extractor is a simple and most of the parts are likely already available…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** These hard cases: Fit the Pinecil Smart Mini Portable…
Dremel - Solder Paste Dispenser - 3D printed CNC v0.1b This is a 3D printed mini desktop CNC that can be used as a PCB milling machine, laser engraver, pick and place machine or as PCB solder paste dispenser. The machine has a build plate…
A reliable Third Hand Soldering Station designed to make soldering and electronics work easier, safer, and more precise. Equipped with adjustable arms and alligator clips (not included) to securely hold PCBs, wires, or small components in…
Resized, to fit the needle inside. Also, added a thin build-in brim, for better adhesion.
Accessory that allows safe usage of T12 tips in Pinecil V2 soldering iron.
I designed a new insert for the Ruggest Multipart Case (V2) to hold an ENGINEER SS-02 Solder Sucker and a 5ml Syringe to hold Flux. The SS-02 will need clearance of ~5mm above it. Either ensure an insert is facing it with clearance or use…
Hardware/Tornillería: 1x DIN 912 3x30mm 4x DIN 125 M3 1x DIN 934 M3 Ruthex Threaded Inserts Soldering Tips - caribou3d.com
Thanks to Victor for the great Solder Scrolland TactfulElf for the Remix. Now with two ball bearings, optional PTFE, funnel for solder, downward coil, left and right handed, reinforced and RH version from Luer lock. I printed my first…
Reduced diameter of head as well as ratcheting surfaces to allow it to fit a slightly smaller syringe inner diameter.
Two versions (smooth and knurled) provided. Print with sufficient brim! See also my Flux and Solder Paste Dispenser Remix
THE EASIEST THREADED INSERT PRESS YOU CAN BUILD YOURSELF!! I remixed thing:2763330 into a solder press for threaded inserts because I liked the original (drill press version) so much for its ease of printability and assembly I felt it…
Soldering iron stand for Pinecil v2 made of 2 bearings D22x7, beer lid D28x7, sponge 50x40x5, copper sponge D34 and a little 3d magic The model has been completely redesigned: It now supports long and short tips. Added a hole for a copper…
Simple soldering iron holder to keep your irons safe and out of the way. It hold six irons. Designed to fit most irons. Four 5mm fixing holes to attach to the wall or cupboards. Perfect for schools and makerspaces. I have two up in my…
I used the stl files from the Pinecil Case from ithan to make this holder for Skadis boards. It fits my Pinecil V2 smart soldering iron perfectly and should be compatible with the V1 since they have the same dimensions. Contrary to other…
This is a Crossover from the Original and there Remixes. I Like the Design but the Original Files are not ready to use. What i used: -The Nut from the Original (Perinski) -The new threaded rod with more space from aethenelle's Remix -The…
Minor modification just to have the text of a different color.
A parametric solder/wire dispenser. Module spool_roll generates the roller spools and module holder generates the holder base. Relies on five (5) variables, modified in OpenSCAD file. no_spools Total Number Of Spools spool_width Spool…
Do you also have a Pinecil Pine64 soldering iron? It is an excellent tool for lightness and manageability however, precisely because it is very light, when you place it on the work table using its natural feet it exposes you to the risk…
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
This inlay is to compliment my other inlays for Werckmann / Action Store organizer boxes . I just figured that I never need my CNC Kitchen TS-100 soldering tips without my threaded inserts and vise versa, so I can as well just store them…
Gridfinity bin for 4 soldering tips. Size 3x1x3.
For assembly, you will need 4 compression springs: length L-10 mm ; width D4.7 mm; wire diameter d-0.5 mm. First, insert the springs into the main part, then install the movable clamps, then insert the pushers ABS, 6 walls, sparse infill…
adapter for using T12 tip on pinecil, with knurled grip. use it along with pinecil mosfet saver from chestwood96 for double protection https://www.printables.com/model/97073
I didn't like how the USB-C connector was left to hold its own, so I created a simple reinforcement boot. Best printed in TPU, but I imagine you can do it in another material if you so choose. I also attached the .STEP and .F3D exports so…
I've been using the same Radioshack solder spool for 20 years and just refilling it when it runs out. I didn't want to give it up so I remixed the original model to cradle it. This should hold 3 desoldering braids and 2 Flux pens. The…
If you need a solid soldering stand for your TS100, TS101 or Pinecil, have a Search for “t12 soldering stand” or in German: T12 Lötkolbenständer at the usual shops: Examples: https://www.amazon.de/dp/B09JSQTW8N/…
This is a 2x2 Gridfinity organizer for some of my soldering materials. I use Kester 1lb rolls of solder, which are about 60mm diameter. I found dedicated solder holders are not space efficient, so I wanted a combo organizer. I also like…
ledstrip soldering help for 3 pin leds, i mad it for my digital leds. its for led strips with a width of 12mm. Category: Electronics
Base: For use with the ElectroCookie solderable protoboard as well as various clones. Amazon ASINs: B07ZV8FWM4, B08BWPGSSC, B09WZY8H3X Designed to be wall or surface mounted. Accommodates microcontrollers such as ESP32, Wemos D1 Mini,…
Compact PCB holder with additional 2 magnets (max. 20x5mm) to hold on any metal surface. Holds your PCBs strong and tight. Number of PCBs: 18 Dimensions (HxWxD): 28 x 100 x 120mm Max. magnet size: 20 x 5mm Material: PLA Layerheight: 0.2mm…
This is a simple vise I designed for the soldering solutions contest. All the parts are already in the best printing orientation. To see how to assemble the vise, watch this instruction video: It can be made without the desk clamp for use…
Its a solder paste dispenser remix. Description as the original https://www.printables.com/model/521761-flux-and-solder-paste-dispenser . No rubberbands. Instead use a ball pen spring. It just makes it look a bit more tidy. Also needs two…
Unlock Organizational Bliss: 3D Printed Soldering Tips Box for Tinkerers Who Despise Chaos! Hey fellow DIY enthusiasts! 🛠 If you're tired of wrestling with a messy workshop, buried under a mountain of tools and debris, I've got your back.…
Why I was doing this? the original pinecil/t100 solder tip is expensive in my country so I was searching for cheaper pinecil tip alternative and found out that a cheap $2 hakko T12 soldering tip is compatible, but I find it too long and…
I didn't see a de-soldering pump mount for the honeycomb storage wall, so I made my own. Library requirements This requires you to install the BOSL2 library to work. There's also a mesh, but you don't want the mesh, you want the OpenSCAD…
Stand for smaller soldering irons such as the Pinecil or TS100. Uses a standard skateboard bearing (22mm outer diameter x 8mm inner diameter x 7mm thickness). Bearing is press-fit and no supports are required. Fits 65mm diameter tip…
Designed with thight fit. You might want to scale it up 0.5%/1% or just sand it a bit after printing printed with supports on ‘back’ BOM: piece of 1.5mm2 wire dc jack glue (recomened 2 piece epoxy) will work with superglue/hotglue 2x male…
Pencil holder for Multiboard with 16 slots for storing soldering tips.
4x2 Breadboard Holder. I could only find 5x2 versions out there which were bigger than they need to be
Created this Gridfinity 5x1 (3U tall) holder for the Pine64 Pinecil Soldering Iron , plus 2x flux and a tube of wire.
1x2 Gridfinity module for holding desoldering braid reels. Designed with a flat top for a cleaner look since other modules can't be stacked on top of this one. Print details: Printer Bambu Lab A1 0.6mm Nozzle Filament eSun ePLA-Lite ‘Cold…
Updates 11/2024: Added a “wide” version with 50% wider base. This is what I use now on my Pinecil and what I would recommend. Description A small but very effective anti-roll foot and mini stand for the Pinecil. It simply clips on and…
A practical and compact Soldering Tin Station designed to keep your soldering tins and solder wire rolls organized and always within reach. This station helps declutter your soldering workspace, making it easier to swap, use, and store…
Use base from the original model Fits a 6x3 magnet which can instantly put the iron into sleep mode if you fitted the hall effect mod as per https://wiki.pine64.org/wiki/Pinecil_Hall_Effect_Sensor
This is a work in progress So I made this model, to try to improve the solderpipe. I thought the solderpipe was a great idea, but it was just to hard to dispense the solder. For me this remix works quite well but it has some flaws. I plan…
The soldering iron stand works for the Pinecil v2 with short tops, like the original model by @O_o_1470185. It can hold a tin can with metal brush for tip cleaning. The cutout diameter is 68mm.
I've printed this holder in TPU (flexible). Other materials might also work. My Printer settings: - Nozzle: 0,4 mm - Layer height: 0,2 mm - Infill: 25% - No supports needed
Stores Pinecil and 5 tips. Integrated lock using bump and groove either size near the opening.
This is a multipurpose soldering jig to help with soldering headers on a small selection of devices that I use a lot. This jig has slots for 20x1 and 20x2 (raspberry pi) standard 2.54mm male/female header strips (works for both). It also…
You can use 3d printer filament or thin wire for the hinge pin. I used a paper clip just because it was handy.
This is a remix of the @ CNCKitchen case for his excellent insert inserters. I originally posted this as a make, but I had requests for a model, so here it is. It fits into an Altoids tin and has a small area to put a few of your…
The set of insertions tools I purchased online came in a simple plastic box, so I decided to make this print to keep the parts better organized. Print Instructions Print in PLA using the 3mf files provided, otherwise : 0.2mm layer height…
Micro:bit boards are brilliant little platforms. I needed a fun replacement for a three minutes hourglass timer and imagined a device working with what I had at hand. Since I wanted to be able to reuse my Micro:bit board for other…
This a fume extractor constructed from a 12V PC fan (80mm x 25mm). I originally planned to use brass inserts in the Back housing, but ended up just threading the M4x20 screws into the PLA. There are still bores in the housing for inserts…
Storage for Engineer SS-02 desoldering pump along with spare tube. Print with: 2-3 parimeters 2-3 top/bottom layers 0,2mm layer hight 10-15% infill.
Designed this to be CNC'd. I have a case that fits the TS80 but it never really fit the TS100 well. I have seen online a nice wooden case for the TS100 but its out of stock everywhere and has been for as long as I've known about the…
Was making a siren for my son's halloween costume and need an enclosure for a breadboard . It need to have holes for switches, power, speaker wire, and an on/off switch .
I wanted to create an organized, compact station for my Pinecil and 120W PinePower so I could easily move all my soldering equipment around together. The station is designed to hold a tub of flux, brass wool, the 120W PinePower, the…
Inspired by Mitxela's Ghetto Soldering Tweezers for the TS101 https://mitxela.com/projects/ghetto_soldering_tweezers Holds two Pinecilv2 irons to create some ghetto soldering tweezers. They are far from perfect, but surprisingly worked…
This is a compact, Gridfinity compliant, soldering caddy. It accounts for the placement of: Pinecil (version 2) Pinecil Short Tip Set (Gross) CNC Kitchen's Soldering tips for threaded inserts Weller Soldering Brass Sponge Tip Cleaner with…
This is an attachable case for a 120 mm fan, to power it over AA Batteries What you need Tools : 3d printer (obviously) Soldering Iron Soldering head for inserting M3 threads Multimeter (if you use an adjustable step-up converter like I…
Base: For use with the Circuit Setup Project Box solderable protoboard. This is the board I use the most for my Wemos projects as it is big enough for 90% of projects, is reliable, and silkscreened on the back side. Refer to…
Modified the inserts to hold an Anker Nano II 45W charger brick and tube of MG Chemicals solder wire. Dimensions of trays and case are different, so it is not compatible with other models. Does work with soldering iron stand accessory.
Remix is made for the bento box version 1 since version 2 was not available when I ordered the magnets and stuff. This remix adds Wago connector holders to the fan bracket and moved the fan cable hole to the right side of the bento box…
A soldering iron stand for the pinecil. Fits snugly around the bearing and the collar. The ring is a little fragile and prone to cracking. Requires a 22mm bearing.
Changed the mount to go on top of the cleaner Category: Tool Holders & Boxes
Compact Solder Smoke Extractor – Simple, Efficient, and Practical 🔥💨 Soldering can be a rewarding task, but dealing with smoke is never fun. That's where this Compact Solder Smoke Extractor comes in! Designed with simplicity and…
*Disclaimer: Use it at your own risk! Soldering irons must be operated acording to user's manual! HEAT RESISTENT MATERIAL IS A MUST! DO NOT LEAVE SOLDER WITHOUT SUPERVISION! An universal stand for soldering irons with heat ventilacion…
Small case for all hot air and soldering station accessories. Designed for PHLLS 745 A1.
![#0117 Pinecil V1/V2(BB2) Smart Mini Portable Soldering Iron Hard Case [2 Sizes]](https://media.printables.com/media/prints/670454/images/5353924_6e7c94e6-92a1-47bf-ab0b-a15ac30893b4_2d36bceb-8f66-4386-8114-1dac6445cf0a/20231212_163347.jpg)
![#0120 Pinecil V1/V2(BB2) Hard Case for Smart Mini Portable Soldering Iron [4x Long and Short Solder Tips]](https://media.printables.com/media/prints/707372/images/5799893_63b32ed3-1fd9-4f9b-8fb9-50cff4bf3655_ddbabf90-1a1a-4db2-8426-259fbbb81d1a/20240128_195410.jpg)
![Flux/Solder paste Cap [remixed]](https://media.printables.com/media/prints/765556/images/5962560_42e2b9de-c5d4-4d1f-a72f-6da832c9d4ca_a82fceed-a95f-4b44-8cb0-6f1974d7d5f2/img_20240215_015342.jpg)
