Dual Pinecil v2 SMD Soldering Tweezers Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ghetto adapter for converting 2x Pinecil v2's into soldering tweezers
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Inspired by Mitxela's Ghetto Soldering Tweezers for the TS101 https://mitxela.com/projects/ghetto_soldering_tweezers
Holds two Pinecilv2 irons to create some ghetto soldering tweezers. They are far from perfect, but surprisingly worked well enough to let me solder / desolder 0603 SMD components pretty easily.
I used the TS100 JL02 tips with this. https://www.amazon.com/dp/B0DQ7NT2VF
I printed in PLA, but I'd expect ABS / ASA / PETG to work well too. |
Print with tree supports. The hollow tube that mates with the solid tube has some holes in the back to let you pull out the supports easier.
PS - The Pinecilv2 has BLE functionality that already has the bulk of the functionality for getting / setting temperature set points… someone smarter than me could probably add a feature to IronOS and have one iron connect via BLE to the other, and just continuously poll the temperature set point on the master iron so that you only need to use the temperature controls on one of the two irons