1 / 7
Plunger with cup opener ( UPDATE 1 ) for soldering paste syringe for KOKI 40g/10ml and some other paste or flux syringes — zdjęcie 1
1 / 7

Plunger with cup opener ( UPDATE 1 ) for soldering paste syringe for KOKI 40g/10ml and some other paste or flux syringes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as…

Ocena
5 / 5
Polubienia
40
Pobrania
349
Wydruki
5
Wyświetlenia
1617
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml).

It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc.

Working length is 80mm (diameter 15.60mm).

The diameter is up scaled about 2% so after printing when the plunger is cooled down, the plunger diameter should be about that mentioned 15.6 for gentle snug fit.

If used material will have different shrinking properties then the up scaling should be properly changed.

UPDATE 1

At the bottom of the plunger I've added a syringe cap opener

Print Settings

Printer:

Geeetech prusa clone

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

30%

Filament:

local PLA

black, yellow


Notes:

Printed in about 30 minutes.
I my case there was no need to upscale the model to compensate PLA shrinkage. It fits nicely most of my syringes.

Category: Electronics

Tagi