11 modeli
Fox 36 Float Token Volume Spacer 10cc Art No. 234-04-736 With the volume spacers you can adjust the progressivity of the spring characteristic curve via air volume spacers, so that the spring behavior of the air spring can be tuned even…
Some modification. Thanks to Author. Print instructions Category: DIY Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1 Infill: 25%
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
Print in PETG or PLA (better in petg) Infill 45% Layer 0.2mm
@AcEKrystal designed a really great needle cap for dispensing syringes, but it didn’t fit the ChipQuik flux syringes I use for soldering. After some quick resizing, I created updated dimensions for both 5cc and 10cc syringes. Depending on…
Organizer / pudełko na tłok wraz z końcówkami i tubką topnika żelowego o pojemności 10 cm3, np. "AMTECH". Na zdjęciu wydruk jest wykonany z PETG firmy “Fiberlogy Easy PET-G” koloru pomarańczowego zaś g-code tutaj umieszczony, został…
You will need a long M4 bolt and one 10 AWG (6.0 mm²) wire ferrule. For the version with a hook, you can either print it as a single piece or print the two-part version and glue the parts together afterward.
Requires a decently well calibrated printer. I apply a bit of cyanoacrylate accelerator to the white bit on the inside of the syringe then pretty much put a healthy amount of superglue onto the center peg of the printed plunger. I printed…
Print 2 of these brackets, one for each end. Slip them over the ends of the Plugable PS-10CC and put screws in the holes in the brackets. When printing, be sure to orient the model so the wider of the sides is on the build plate. In this…
Fox 36 Float Token Volume Spacer 10cc Art No. 234-04-736 With the volume spacers you can adjust the progressivity of the spring characteristic curve via air volume spacers, so that the spring behavior of the air spring can be tuned even…
This is a custom frame designed to fit the motherboard from an ASUS R510CC laptop. The goal of this project is to reuse the laptop motherboard as a small headless server , without the original laptop shell, screen, keyboard, or touchpad,…
