1 / 2
Permanent Plunger for 10cc Flux Syringe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue On with superglue for a solid plunger to use with your flux tube
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Requires a decently well calibrated printer. I apply a bit of cyanoacrylate accelerator to the white bit on the inside of the syringe then pretty much put a healthy amount of superglue onto the center peg of the printed plunger.
I printed mine with PETG, fits well (if a bit loose) and is very solid once glue settles. Plunger prints vertically, no supports needed.