Liczymy pasujące modele…
MX-creations DISCORD (German) Eine funktionale Spritze für z.B. Fett, Wärmeleitpaste, Lötpaste, usw. Sie ist dem Luer-System nachempfunden bzw. kompatibel, somit lassen sich Kanülen schnell und sicher befestigen oder lösen. -bitte mit…
Unload the JB weld content into this syringe, then apply. The solutions are mixed in the nozzle tip automatically. One time use. Uses a cheap 14mm x 1.9mm o-ring.
this creates a syringe holder for when using a bd-100 insulin syrigne for trt, hrt or insulin for use with the bd U-100 insulin syringe (1ml ultrafine)
This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…
Wife wanted an organizer for her syringe supplies so this is what I came up with.
For 200ml (7oz) liquid medication bottle. Print in TPU or a FLEX filament. You may have to adjust the orientation of the model to sit flat on the print bed.
Adapter to fit a 60 ml Syringe on a Harbor Freight PITTSBURGH 4 in. Ratcheting Bar Clamp. I printed the Jaw rotated to sit on the chamfer with 5 walls as this improves the strength. my tests showed it push's about 20 Lbs. of force on the…
1x1 gridfinity for 10ml syringe of flux along with plunger and a small plastic nozzle
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
DESCRIPTION To help with fine control over the feed of my flux (or other chemicals) from a syringe, I use one of those syringe plunger levers. The concept of the level is good, but the common implementations seem under developed. The…
Just add some remix for Syringe 18.5, 18.8, new straight lever with space for a longer screw 16mm and small chamfer to help to pass the TPU Gripper. just need to remove a small part on the top of the syringe like on the picture
I take the Eli Lilly Direct Zepbound with the 0.5 ml Vials And 1 ml Syringe. I have a tremor and I broke 2 needles and wasted a half-vial of juice (ouch, expensive). My daughter has no tremor but she uses it also. The vial snaps in…
Nozzle for a pastry syringe (bag). Small diameter 15 mm, large diameter 25 mm, height 40 mm.
Pastry bag (syringe) nozzle. Small diameter 10 mm, large diameter 30 mm, height 48 mm. Cutout height 20 mm.
Simple remix, I widened the tip because had troubles with top layer gaps when using original model. Wider top is more reliable. I tested with ChipQuik (both flux and solder paste) and Mechanic solder paste which happens to use same…
Convenient holder for syringes with flux 10ml mechanic ersa and others Update add version 2 by Luer Lock flux syringes 10ml
I really liked the original design and printed a couple, but I had a lot of issues with some of the threads. I imported the whole thing into Solid Works and reworked it. I combined a lot of parts, which now need support, but the clean way…
it is made in inches. It needs to be reduced to the size you choose
here are the files for my Syringe Prop. I made this after a request from a friend who wanted a decoration for her beauty studio, so thought I would share it for if it is useful to anyone else. all parts but the needle print with zero…
impression avec support et deux modèles de support 10ml et 20ml bonne impression n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
This is a model of the syringe adapter used by “Stem inventions” in the video Young Engineers: Pneumatic Machine - Build a DIY Air Pressure Powered STEM Project for Kids I was only looking for the adapter but couldn't find it anywhere…
This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…
This is a mount to clip the 5ml syringe onto the matching 200ml medicine bottle, such as an Ibuprofen suspension or similar. — Printing tips: I recommend to print in PETG, as PLA may loose its clamping force over time. If it doesn't fit…
This is not my idea but I created the models to make them public. I use glue to add rubber from inner tube on the arcs that are in contact with the bar/frame/fork/syringe I use M4 bolt (25mm), Knurled M3-M8 Thumbscrews and M4 inserts. I…
I have tried some of the magnet placement tools while printing my first Gridfinity parts. They helped getting the polarity correct, but I frequently glued the magnet to the tool by mistake. This tool has an internal retractable magnet.…
help to organize your feeding supplies printed in PETG with 0.6 nozzle
I use oral medicine syringes to measure chemicals for my fish tank. These adapters make it really easy. Just stick the syringe in the hole, invert the bottle, and pull out your required amount. These adapters fit API CO2 Booster and Tetra…
syringe pump for 20 ml ( works also for 10/25 ml) ..., there are various marks of syringes - some can fit better than others … For gears 100 % infill, for other parts 30 % infill. It is first version - lots of space for improvement, but…
I never really use any diamond paste as it all sits in a bag but today I was polishing something up and thought to myself let's see how these work. I quite liked them so I decided to make a wee stand for them so I can actually see them…
Had my own grease in the box and only one syringe on hand, so i remixed it to fit the syringe.
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Travel case for my stimpak, as I realized the prop might not survive travel in a bag. Storage for replacement syringes is included, held by magnets (you will need 4 neodymium magnets, 20 x 6 x 2 mm). I sourced the magnets here…
Modular Syringe Holder for 20ml, 10ml, and 5ml Syringes This modular syringe holder is designed to accommodate 20ml, 10ml, and 5ml syringes, with each module being able to connect to another, either with or without magnets. Each module…
This is the first version of a drying rack, designed to hold 20 syringes for tube feeding. After it is used for a while, it will likely be updated and adjusted. I am not sure how well the plunger rack will work in use. The barrel holder…
For syringes with an inner diameter of approximately 15.75 mm. I use it for flux syringes, which unfortunately arrived without a pusher.
With this, if you need to draw a viscous medication, such as something oil based, into a small gauge needle (which normally can take a while), you can set your vial, set your syringe, and pull the plunger.
I designed this tool for my lab work. I am using pressurized serum bottles. Through a septum I have to inject 1 ml and 5 ml of fluids. This tool blocks the plunger at a certain volume (1 ml, 2 ml, 3 ml, 4 ml and 5 ml) and prevents the…
Was requested the file of my Rad Lab Loobtoob 20ml holder. I simply hot-glued it to my pegboard since I don’t need it to be mobile around my shop.
Filter caddy, use with cotton or paper filter optional fill with pellets.
Sim labs loose these often, so I have made a replacement cap that says sim lab so they don't get taken. They break if printed in pla so make sure to print them in resin on an sla printer.
****************************************** Edit : Add a parts of the .3mf with a smaller hole for the finger parts (identify with a S) You can use the hole for pushing support or the part if it break…
This is a quick and easy printable cap for a soldering flux syringe to keep the needle protected, prevent quick drying of the flux and it keeps stuff from getting sticky when storing the syringe. The design requires no support, tho I…
Potřebovali jste někdy zašpuntovat stříkačku? Spousta modelářů stříkačky používá na míchání barev, zároveň v nich barvy uchovává. Snadno se odměřuje množství… Tento model doporučuji tisknout z flexibilního materiálu, tisknout od širší…
Wanted to be able to have a safe place to keep my Star Pen when in the operatory. Holds everything you need including a safe capping system. Spray down and let dry between use. Hold carps and extra setups. I like to run a short and long…
Adapter to make it easier to squeeze thick adhesives through a "Monoject 412 Syringe" 18mm diameter. Printed with 4 vertical walls and 30% infill.
I use syringe and tips to DIY my vape liquid, my wife use some to DIY perfume & make up. Now everything is organized
This is a superloop for applying large volumes of sample in an FPLC System using 50ml syringes. Use Fill one 50ml syringe with the sample (up to 60ml fit) Place it in the superloop and rotate the syringe so that it is held in place by its…
The couplers in the image were printed on an MK4S using SainSmart Shore 95A TPU. This type of TPU is flexible enough to wrap around the opening of the vial (tip: insert the vial into the coupler at an angle), but firm enough to hold it…
Made for Solostar insulin pens. Slide this mod over the pen to use it as a syringe. The small rectangle extrude is to put a small magnet so it sticks on metal things. The pens of Solostar can have a slightly different size (+- 0.2 mm) so…
Español: El diseño de esta pieza está pensado para mitigar la fatiga que produce en la musculatura de la mano a lo largo del tiempo el movimiento de presión que se realiza con el pulgar al empujar el émbolo de la jeringa a la hora de…
I wanted a box to hold my two syringes securely. Once printed, you can cut or sand some of the tabs away to fit based on personal preference for how tight you want them held. Lid will fit into place, or, you can put in magnets from the…
Holds 4x 5ml or 10ml syringe with needle (and cap). Loose fit (7.5mm) for easy insert and removal without magnets in the base.
EN: When measuring the recesses for the syringes, the slicer showed me a diameter of 14 mm, which should have been enough. After printing them out, however, they turned out to be too small at 13.5mm. Strangely enough, the rest of the…
IMPROVED DESIGN NOW AVAILABLE: https://www.printables.com/model/1119419-improved-standard-syringe-to-6mm-dowel-conectors Standard plastic syringe to 6mm wooden dowel connector/adaptor. Used for a school engineering project to control a…
модель : из двух частей [клеится-паяется между собой]. печать : абс слой 0.2 заполнение :26% периметры: 2 нижний-верхний сплошной слои: 3 model : made of two parts [glued-soldered together]. Printing : ABS layer 0.2 filling :26%…
IMPROVED DESIGN from my recent post https://www.printables.com/model/1114580-standard-syringe-to-6mm-dowel-conector The last design had more material than required to print a solid and strong bracket; these designs have material removed…
my thermal grease syringe cap was missing cant believe there isnt any plain caps
Maybe I am just a heavy handed person... but I have broken both of the syringe plungers with my 510 Pyro development kit. Unfortunately none of my other synringes fit into the provided kit so I wanted to provide a replacement. Wanted to…
A family member recently started taking injections at home and needed a way to store and dispense the syringes. This is just that. If someone can use it, then it was worth uploading to be shared. This was printed on a Bambu X1C with 0.2…
Инъекционный пистолет со шприцем. Пистолет для уколов в домашних условиях. Производит автоматический резкий впрыск. Некоторые детали нужно напечатать отдельно и склеить между собой. Из-за сложности модели она требует корректировки деталей…
to stop the syringe plunger at a distinct (1 ml, 2 ml, 3 ml, 4 ml, 5 ml)
Holders for hydraulic bicycle brake bleed syringes. Print in TPU. Pin should be printed in a strong material, I used PC but PETG should also work. PLA twists too easily. I recommend printing by object instead of by layer. Update…
You should use double sided tape to mount this holder. 12x52mm for syringe. 19x7mm for flux container. For syringes with diameter equal or bigger than 18,5mm.
I wanted more compact flux dispenser to carry in case with my portable iron, so designed a version for 5ml syringe. Also I didn't like syringe fixation in another dispensers so I designed twist lock functionality (for it to work properly…
MX-creations DISCORD (German) Eine funktionale Spritze für z.B. Fett, Wärmeleitpaste, Lötpaste, usw. Sie ist dem Luer-System nachempfunden bzw. kompatibel, somit lassen sich Kanülen schnell und sicher befestigen oder lösen. -bitte mit…
This 1x1 Gridfinity bin is designed to hold a flux syringe for quick access. Unlike other models I could find, it seals the bottom of the hole to prevent leaks and keeps the flux from drying out. The bin comes in four variants based…
This is a syringe holder clamps onto an IV pole. It's designed for 20mm diameter IV poles and holds two 10mm diameter syringes and a needle in its packaging (shown in an 18Gx1"). The clamp requires a M3x30 socket head screw and a DIN 562…
This model is compatible with the lego system.
If you need liquids in an Exadoral syringe by Braun and want to seal the syringe for later use … use this cap. (as side note, an empty syringe with this cap is a nice fidget toy ;-) ) NOTE: please test your material with your liquids.…
It prints with no support in around 1h using the “draft” setting on Prusa Slicer which has a .24mm layer height and a 15% infill.
This holder is for syringe driver syringes. this is large print and would need a bed size bigger than 250x250. The infill does not need to be high. 10% should be fine. PETG advised for cleaning with detergent wipes.
Syringe handle - for rinsing the nose of children. For diameter 4mm.
Added wings to this monoject cap so it can't roll away. For 10mL MonoJect syringes. I use these for synthetic grease and glue and this cap does well to seal off the end.
This model is compatible with the lego system.
A basic 3d-printable model of the eye syringe Jinx uses on Silco in Arcane
I store my solder mask goo in little syringes so I can apply it to boards without making a huge mess. These caps are designed to seal the container while not in use. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus…
This is a convenient stand to hold two bottles of infant medication (such as Tylenol or Advil), as well as four disassembled syringes (body and plunger) upside down for drying. Each compartment tapers to a small hole to let the drips out…
Star of Life, DNA, and Syringe Earrings Patreon Request 2 Sided version and Flat version (All Versions Untested) are available for Patreon exclusives for the 2 commercial tiers. Check out my other Health Care Earrings! I print all my…
I wanted to keep a tiny amount of SuperLube in a small service kit as my 3D printer only needs a tiny bit of this every 500 hours or so. To make the kit half the length, I made the plunger removable from the syringe, and to save space, I…
I created this for my mom as she owns an estetician place injecting botox and sever other procedures . she loved it so decided id post it. enjoy!
A flush adapter that converts a syringe with a Luer lock to a loose 6mm x 1mm threading found on this particular Hongdian fountain pen nib. Strongly recommended to print in TPU, however, PLA may do as well. Parts Syringe 10pcs 5ml - (…
This is my first try realizing a syringe extruder. My first prototype worked surprisingly well but, this is still work in progress and more of quick and dirty rather than good engineering. I hope to make some updates/upgrades but I do not…
Quick Tool Changer - Tool holder for my Syringe Extruder https://www.thingiverse.com/thing:4878606 Note: Print without support with smaller side on the bed You need 4 M5x8 screws for mounting. Modified from @properprinting's Quick change…
Covid 19 Vaccine Syringe Pen (BIC) Supports needed Supports and support blocker added to the file
When mixing e-cigarette liquid, it is important to be able to measure exact amounts. The marking on my syringe was worn off, so I made a little helper. This aid is designed for a 5 ml syringe.
This is a series of nozzles and plugs to dispense and store your solder paste. The nozzles exists in 3 variants with a nominal diameter of 1.2 1.8 and 2.4 mm diameter. The plug screws on the tip of the solder syringe to keep it from…
Sexy Slim Covid 19 Vaccine Syringe Pen (BIC) File with supports and brim setings and support blockers.
The syringe is my first successful blasters I made. This blaster is currently still a work in progress but complete enough to post this version. If there is any questions please message me. I plan on adding functions later and if there…
Oft hat man eine oder zwei Hände zu wenig wenn man sich den Insulinpen injiziert. Ich habe mir dann eine Ständer für alle Untensilien konstruiert die alle Betandteile zusammen halten und nichts vom Tisch fliegt. Gerne könnte Ihr die…
An insert to allow the clamps on top of the Miltenyi Prodigy to accept syringes. Print can stay in place, and syringes can then be clipped in and out of the system as needed. I printed in PLA at 0.2mm height with a 0.4mm nozzle. No…
![Syringe holder with flux [Держатель шприцев с флюсом]](https://media.printables.com/media/prints/1115210/images/8425032_baf80069-28e1-49a5-b6e7-0799dfae4037_779d8f8d-5b61-46bb-b955-da941e308960/photo_2_2024-12-20_16-25-21.jpg)
