Grease-Nozzle for Syringe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a simple way to lube my linear rails. This nozzle fits on standard syringes with a Luer-Lock connection.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 317
- Wydruki
- 2
- Wyświetlenia
- 1890
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Regreasing the linear rails on my printers is a frequent task, and with the many rails that don't have working grease-holes, it's a bit awkward to get grease into the raceways without taking the cart off.
I have established a routine to press grease in from the backside through a bore in the rail. The bore-holes are 3.5mm, and I press a syringe to the hole and squeeze until the grease is visible between the balls.
This video shows the application method. It gets even easier with this nozzle, It's 3mm at the tip and sits snug against the bore of the rail.