1 / 4
TS100, TS101 and Pinecil adapter for T12 Soldering holder — zdjęcie 1
1 / 4

TS100, TS101 and Pinecil adapter for T12 Soldering holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement of the solder iron holder to fit Miniware TS100 / TS101 or Pinecil soldering irons.

Ocena
0 / 5
Polubienia
10
Pobrania
78
Wydruki
0
Wyświetlenia
1477
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

If you need a solid soldering stand for your TS100, TS101 or Pinecil, have a Search for “t12 soldering stand” or in German:  T12 Lötkolbenständer at the usual shops: 

Examples: 

https://www.amazon.de/dp/B09JSQTW8N/

https://www.aliexpress.com/item/1005006142348301.html

This one only costs around 10-15 euro, but the holder is slightly too large and aren't long enough to hold these thin soldiering irons. 

As you can see, even the long “cnc kitchen” soldering iron insert helper will fit with this modification. 

 

Print the model in PETG and unscrew the two phillips screws from the inside. 

You will also need a washer: M8 / 16 (16mm outer diameter, 8mm inner diameter). You have to push it into position. 

 

Have fun :) 

 

 

Tagi