TS100, TS101 and Pinecil adapter for T12 Soldering holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement of the solder iron holder to fit Miniware TS100 / TS101 or Pinecil soldering irons.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 80
- Makes
- 0
- Views
- 1,487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
If you need a solid soldering stand for your TS100, TS101 or Pinecil, have a Search for “t12 soldering stand” or in German: T12 Lötkolbenständer at the usual shops:
Examples:
https://www.amazon.de/dp/B09JSQTW8N/
https://www.aliexpress.com/item/1005006142348301.html
This one only costs around 10-15 euro, but the holder is slightly too large and aren't long enough to hold these thin soldiering irons.
As you can see, even the long “cnc kitchen” soldering iron insert helper will fit with this modification.
Print the model in PETG and unscrew the two phillips screws from the inside.
You will also need a washer: M8 / 16 (16mm outer diameter, 8mm inner diameter). You have to push it into position.
Have fun :)