Counting matching models…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and that it fits the chassis.…
DIDATTICA MOVIMENTI MECCANICI GT12 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This is a tool to hold the Clutch in place to remove the nut in the middle of the clutch. It works with a lot of Honda Benly Engines, like the Honda Rebel 125, CB125T or Super Dream. Category: Automotive
A mount/holder for a Quecoo T12-956 Soldering Station, horizontal or vertical, mounts using two screws 40mm apart. Mine is infrequently used, mounted with the smaller holder under a shelf. Two versions, one for higher usage applications…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and printable and that it fits…
This is a custom made part to replace the cover found behind the divers seat on a Yamaha MT-125/ R125 (2014-2019). Part Number: 5D7-F4796-00-00 Custom made in Autodesk Fusion as a novice. Background When I bought my MT-125 second hand,…
My pipe got broken and dyson didn't have stock for replacement, so i made mine. i printed with MK3S, PLA, 100% infill, 0.1mm, organic support
Holder for my soldering station and couple of soldering tips.
Fiat 124 (1976) / Murat 124 – STL release Single-piece, watertight mesh. Scale as needed in your slicer (STL has no units). Feedback welcome.
Underdesk mount for GL.iNet Opal Hardware: - I used M6 bolts
Its a soldering station which is powered by a 18V battery (Bosch professional) or an external power supply (XT60). You need. soldering station https://de.aliexpress.com/item/1005010233269391.html battery adapter…
This is a slide in case and stand made for the cheap Chinese T12 soldering station that are commonly sold under names like Ksger, Queco, Quicko, Feita, etc. Many of these stations share the same case dimension so it should all fit. This…
This is a case to fit 10x soldering iron tips side by side. I like krab's case for 6 tips with how sturdy it is compared to many others on this site. I had a few more that were longer, so made it slightly larger and wider to fit them. I…
The original Aoyue WQ tips are shorter and nicer, but T12 tips are way cheaper and easier to source, so I have for a long time wanted to do this mod to be able to use them. WARNING : The thermocouple in T12 tips is different, so you have…
Voici quelque pièces de remplacement que J'ai déssiné pour restauré mes alt125 et lt125 il y a tout les modèles de bushing qui vont sous le banc a imprimé en tpu il y a aussi le rubber du shifter ( 84 a 87 le 83 est pas le même) il y a…
Update 6/4: Highly recommend figuring out how to print this at a 45. The flat one broke pretty easily, the ears came off with the first accidental impact with the curb. The other one, other than not wanting to feed because of the ruff…
Holder for T12 13mm OD handles with two holes 20mm apart.
Re-mix for 10 tip storage. New quick remove lid and stacking option. Shrunk to 10 tip storage. Added angle and notch to lid slots on base. New notched for one third movement lid with angles, added text and pattern. Added text to case and…
Ремикс станции которую Я делал, тут объединены паяльник, фен и лабораторник, все имеет корпус по размерам схожий с компьютерным БП. Так же сделал крепеж Category: Electronics
Это ремикс станции от Voltnik -Добавлены крепежи для DC\DC преобразователей -Изменена лицевая панель, под другой тип Вольт\Амперметра -Перенесены крепежи для потенцеометров. -Добавлен слот под USB Что бы еще добавил? Отверстия снизу, по…
This mount is detachable. Made it so I could mount the soldering unit to my bench and quickly remove it if I need to work somewhere else. The bands are just thin enough that the rubber feet on the bottom of the soldering station will make…
This is the cheapest way to get affordable solder (approx. 15 EUR). You can buy the kit here ( aliexpress.com ). Once the kit is in place, you can print the box with the stand. Insert the solder PCB board into the box, the opening in the…
I couldn't find anything sensible to hold my tips for the T12X. In the top holes, I've put a little bit of tissue so the tips do not hit directly the plastic and ensure their safety.
I bought this PTS200 soldering iron from aliexpress which supports TS100-styled bits and T12 bits via different sleeves. The threaded connector (shared between both TS and T12 configurations), is left-threaded on the sided that fits onto…
Just a file so people can add the nametag on the RobotUp T1200 Pro.
A IKEA skadis holder for my T12-942 iron from Quicko (Chinese). It is a little tilted up so that the display is clearly visible. I use this thing for +- 2 years now (on 18 September 2024) and still didn't find any issues with the design.…
Missing part for this awesome portable tool. Printed in ABS with fuzzyskin 0.16/0.16 layer 0.16.
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
EDP controller board for NT116WHM NT125WHM-N42 1366X768 MINI HDMI LED 2 TYPE C LCD controller can be found here: https://www.ebay.com/itm/166465703483?var=466110114895 Printed with PLA, threaded inserts are also needed to put the parts…
Print both pieces upside down. PETG or TPU is the preferred material as it flexes around the OTA.
Allows to mount the router sideways on a DIN rail. (Here used together with DC power supply and relay to power Starlink antenna) Uses M3 socket screws
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and that it fits the chassis.…
This is still a work in progress model, the basic functionality is tested and works. I've used V1, shown in the photos, for 1 year now, as my main solderingiron, even though it was only intended to use it mobil. V2 has a couple of…
Case for the threaded insert tools from CNC Kitchen designed for the T12 soldering iron. https://cnckitchen.store/products/soldering-tips-set-compatible-with-t12 For assembly use 8x 4mm x 1.8mm magnets. Print without support.
So I originally made this so I could attach magnets to the case and allow it to mount to rack mount cases (using custom blanking plates with magnets as well). You can also mount this to the wall if need be. The tight is fit and you might…
Basically I ordered a soldering iron from aliexpress, the cap fell down at some point of my time using it, so I made a new one. The soldering iron in question is this one: https://es.aliexpress.com/item/1005005291695011.html Print…
The Fluffy Brush part that is keeping the rotating cylinder brush broke. Searched all over Printables and other sites, but I was unable to find an already built one. I tried my best to recreate it, so I ended up with 4 pieces, as printing…
DIDATTICA MOVIMENTI MECCANICI GT12 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This housing is specifically designed for the Enilux adapter. It includes connectors compatible with popular brands such as Bosch, Metabo, Festool, and others. Below are links for various brands: Bosch:…
A nice spice drawer organizer insert for a next125 kitchen. Fits round objects and prevents them from rolling. Fits drawers with 225mm width. 4 insert fit exactly in depth. Also created a short version for a secret hidden space behind. If…
project with 3 type rims for tire phone holder
I created this hose adapter to fit over and reduce the 60mm dust extraction port to a 35mm vacuum hose - specifically for use with a Triton TPT125 Thicknesser. The ends of the adapter are tapered to create a push-fit. It may not fit your…
VASO GT12 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
If you own a CA77 you're most likely aware of the difficulties around battery fitment. This adapter allows you to run a common battery (MotoBatt MBT12B4) in the stock tray without modification to the chassis. This will requite an…
This is a tool to hold the Clutch in place to remove the nut in the middle of the clutch. It works with a lot of Honda Benly Engines, like the Honda Rebel 125, CB125T or Super Dream. Category: Automotive
Adapter to seat T12 soldering iron tips into the Pinecil. Remixed from kohkoh's model, this adapter is extended 20mm to put the grip closer to the tip, giving the user greater control. It's recommended to print this from a material that…
I aimed to optimize my workspace as a radio enthusiast. The various T12 soldering iron tips, frequently used for soldering or desoldering electronic components, often end up scattered in different places. A dedicated case for storing all…
I needed a portable case for my soldering station do solder LED stripes on the go. I had a controller laying around and some 3S LiPos, so I came up with this design. You will need: KSGER STM32 OLED V2.01 Temperature Controller…
Mounting holes for XH-M609 are 2.8mm are intended to screw directly into the base without heatset inserts. Parts were printed with extra walls for more bite into the plastic. I used ASA-GF which helps even more. Pins for the XH-M609 board…
A mount/holder for a Quecoo T12-956 Soldering Station, horizontal or vertical, mounts using two screws 40mm apart. Mine is infrequently used, mounted with the smaller holder under a shelf. Two versions, one for higher usage applications…
Multiboard container to hold the CNC Kitchen heat set threaded insert tool for a T12 soldering iron. One holds the T12 insert at 30degrees and the other is vertical. Printed at 0.2mm layer height, 10% infill, PLA Pro.
This is a stand for a cheap T12 clone soldering iron. Printed the base with 100% Infill to make it heavier.
Yep, that's not the best model, but it works, feel free to modify it to better look. You might need inner diameter x-y compestation to fit your tip (I did 0.1 mm).
Stay for mounting the camera of the drive recorder AKEEYO AIO-5 Lite on the front of the CT125 Hunter Cub
I created this case to fit my project with DidiSpark with DHT12 and a 0.91; OLED. More details are on https://www.hackster.io/yu-fan/digispark-thermostat-with-dht12-and-oled-74a692 Category: Electronics
T12 Digital Soldering Iron Station KSGER, Lefavor, Quick, GVM…. .
I made this part to protect the internal pinecil components from accidental damage due to inserting T12 tips too deep. Printed in PETG with paint on supports under the front overhang.
mango maneral para puntas de soldador T12 esta impreso en ABS o cualquier filamento que sea resistente alta temperatura, de debe imprimir hacia arriba con la parte curba pegada a la cama, soporte en la base curva.
I wanted a way to attach my travel router to the telescope mounting plate for Astrophotography. With the powerbox the only cable that needs to leave the scope is the one power cable and all other cables are contained neatly on the scope…
Simple box for Aliexpress soldering iron with t12 tip and USB-C PD power. Just use 1.75 filament for the hinge. + 4x 8x1,6mm magnets Soldering Iron: https://www.aliexpress.com/item/1005005291695011.html Sponge + holder:…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and printable and that it fits…
Plastic footrest element that breaks when the pit bike falls. I increased its height a little for convenience. Original spare part / оригинальная запчасть: https://sharkminigp.com/producto/juego-reposapies-aluminio-mt12 PITBIKE SHARK MT12…
I made two DIY soldering stations based on the T12 soldering iron. The second is a dual channel one used as hot twiners. This bracket holds them together. Printed in PETG.
This pack model for Hakko T12 2024 rev. Used Fusion 360 for create and based on aliexpress block for Hakko T12. M3 nut and M3 screws for assembly.
I printed this in PETG, any infill. It's just a panel to strap things to :)
Gridfinity tray (6 by 2 squares) for the KAIWEETS ST120 "pen style" multimeter
Podložka pod zpětné zrcátko pro Fiat 126p (Maluch), levá a pravá strana, tisknuto z TPU95A od AmazonBasic TPU (profil materiálu přímo v PrusaSlicer) pro lepší přizpůsobení karoserii vozu. Ve "sliceru” zamalované všechny pohledové části…
I needed a 10 piece T12 soldering tip holder, wasn't able to find any good low profile models so here's mine. A 29g (with supports) print to store all your t12 bits. Inner Diameter - 7mm Hole Height - 60mm
I have a solderingstand on top of my KSGER-T12 Solderingstation. To prevent it from moving around i made a small connector, that fits into the casting of the soldering stand and is mounted to the housing of the KSGER-Station. I bought…
A case for up to eight T12 soldering iron tips. I drew inspiration from this 18650 battery holder https://www.printables.com/model/1160714-speleo-18650-case in creating this design. The lid fits tightly enough that it won't easily come…
Simple case for storing T12 soldering iron with 2 tips
Easily printable extender for Quicko T12 microsolder and its other clones of the same size, which allows this microsolder to be elegantly operated on batteries designed for Makita or Parkside hand cordless tools, which is useful not only…
Hello! After I research for a case, and in Instructables and other websites, So I didn't find nothing.. so nice, or just nice. I decided draw my case, in my opinion it got better than I expected and more functional. I don't know.. take a…
I had printed this ( https://www.thingiverse.com/thing:4657262 ) m18 soldering stating base without realizing the oled panel of my kit differed from the led one. The base required some sanding in order for the soldering board to fit into…
I designed this compact sliding storage box to securely hold up to five T12 soldering tips using embedded magnets, keeping them firmly in place—even during transport. The design uses ten 6×3 mm magnets, which can be easily press-fit…
My first T12 soldering holder didn't fit my trusty, 30-year old Radio Shack wire holder. The wire cage is 28mm ID, and roughly 33mm OD. This might work for other cages by adjusting the scaling, but I also included the Fusion360 file, and…
LASER GT12 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
This model allows you to easily insert two banana plugs into the UNI-T UT123 multimeter at the correct spacing. The plugs press-fit into the adapter, keeping them aligned during use. Ideal for temperature probes with banana connectors.…
This is a travel protector for T12 plugs , also known as Swiss 3-pin plug, SEV 1011 plug, or Type-J plug. If you have bent or broken the pins of your plugs during travel or transport, or if you simply want to prevent this from happening,…
A slide top box to hold a T12-942 DC solder station with handle, a Dewalt 20v Max battery power tap with adapter and a screw top storage tube for T12 style solder iron tips. The Dewalt 20v Max battery power tap was made from these…
Quick made case for JUNLIWEI XPG (XPGT12.TAOBAO.COM) controller with front panel (90x40mm)
This is a T12 tip holder I designed for my portable soldering station. There is a cavity in the “Holder Bottom” file to encapsulate a 30mm x 2mm magnet. The idea was it would prevent the holder from falling over when selecting a tip.…
Gridfinity compatible solder tip organizer for up to 21 tips.
