PINECIL & TS100/101 ALL-IN-ONE CASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wider "Rugged Multipart Pinecil Case (V2)" with MORE storage. Compatibility with TS100/101 irons.
- Ocena
- 4,852 / 5
- Polubienia
- 455
- Pobrania
- 2297
- Wydruki
- 30
- Wyświetlenia
- 14 560
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
-Uses six M3x20 screws for the hinges and latch.
-Uses two 3mm x 1mm magnets for the small parts storage compartment (optional).
Storage for:
1 x Pinecil (TS100/TS101 BETA versions still testing)
7 x Short Tips (6 x Tips for TS100/TS101 due to dimensional differences)
1 x Long/Short Tip (installed in soldering iron)
1 x Flux Syringe (1 ml) OR Flux Syringe (6 ml) OR Alternate Large Slot
1 x Magnetic Storage Compartment for Small/Spare Parts (Need Four 3mm x 1mm Magnets)
1 x 608 Bearing Stand (from V2 stand from Termiman or my remixed version)
2 x Solder/Ribbon Spools from Termiman
1 x Slot for Wet Sponge
1 x Slot for Brass Sponge
1 x Slot for 1.5m USB-C Cable
INFO & TIPS:
-To load up your own 1ml oral syringe; you can melt flux until liquid (with a hair-dryer or heatgun) and suck it up.
-The 4 magnets (3mm x 1mm) for the storage container, might need a dab of superglue. I tried to make a magnet-less hinge and compliant latch, but there isn't a ton of room to work.