PINECIL & TS100/101 ALL-IN-ONE CASE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wider "Rugged Multipart Pinecil Case (V2)" with MORE storage. Compatibility with TS100/101 irons.
- Rating
- 4.852 / 5
- Likes
- 455
- Downloads
- 2,297
- Makes
- 30
- Views
- 14,560
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
-Uses six M3x20 screws for the hinges and latch.
-Uses two 3mm x 1mm magnets for the small parts storage compartment (optional).
Storage for:
1 x Pinecil (TS100/TS101 BETA versions still testing)
7 x Short Tips (6 x Tips for TS100/TS101 due to dimensional differences)
1 x Long/Short Tip (installed in soldering iron)
1 x Flux Syringe (1 ml) OR Flux Syringe (6 ml) OR Alternate Large Slot
1 x Magnetic Storage Compartment for Small/Spare Parts (Need Four 3mm x 1mm Magnets)
1 x 608 Bearing Stand (from V2 stand from Termiman or my remixed version)
2 x Solder/Ribbon Spools from Termiman
1 x Slot for Wet Sponge
1 x Slot for Brass Sponge
1 x Slot for 1.5m USB-C Cable
INFO & TIPS:
-To load up your own 1ml oral syringe; you can melt flux until liquid (with a hair-dryer or heatgun) and suck it up.
-The 4 magnets (3mm x 1mm) for the storage container, might need a dab of superglue. I tried to make a magnet-less hinge and compliant latch, but there isn't a ton of room to work.