Pinecil Remix of TStation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of spTim's fantastic soldering station. I remixed it to work with the Pinecil soldering iron.
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 243
- Wydruki
- 4
- Wyświetlenia
- 2956
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of spTim's fantastic soldering station for the TS80p. I have a Pinecil soldering iron, so I made a bunch of updates to the original design so that it will work with the Pinecil.
iron holder - Pinecil.stl I updated this so it will hold the slightly square shape of the Pinecil securely. I started with this design for the holder piece, and updated it so it would fit in the soldering station. I had to move it slightly to the left and slice a little from the top so that everything would fit when you close the box.
left - Pinecil.stl I made a slight change to the area just above the iron holder. I removed a little of the lip so that I could have the iron holder piece be as tall as possible in this case.
right - Pinecil.stl I made some major updates to this piece since it was originally made to fit the TS80p. I pulled the Pinecil body and tip holder from this design, as that design already held both pieces very securely. I changed it slightly so that I could keep the hole inserts at the edge of this part, since I like the extra security that adds when closed.
main - Pinecil.stl This is optional for you to print. I made some changes for my specific use-case. The charger I used was slightly larger than the one spTim used, so I increased the size of that space. I also removed the divider in the accessory bin so that my USB-C charging cable fits in it.
You'll have to grab the other pieces from the original version of this box. Hope you enjoy this!!