Fully Portable Pinecil Soldering Station with Battery

This model builds on the fantastic Pinecil storage systems already out there. To complement a lot of the less featured, minimalist designs out there, I wanted to cram as many features as possible into one of these boxes. 

This box includes all of the wonderful features from @BlackEternity's All in One Pinecil Box like the CNCKitchen heat set insert kit and large tubs for power bricks and solder. I have also added storage for wire strippers, heat set inserts, liquid rosin and isopropyl alcohol, and a portable power bank that can run the soldering iron. 

To fill out this kit I used all of the following items:

• Solder 
• Solder Wick
• Power Brick - I got an Anker 65W USB-C brick, but a pretty wide variety will work
• Dermasafe knife
• Mini Screwdriver for changing solder tips - I used https://www.amazon.com/dp/B0BK4FMLKN?psc=1&ref=ppx_yo2ov_dt_b_product_details
• Charging cable - I got a 1m USB-C PD cable, but I would recommend a 1.5m, it should fit, though it will be tight. 
• Some 22 gauge wire
• 608 bearing for soldering iron holder
• Brass tip cleaner
• CNCKitchen Heat Set Insert Kit. Make sure if you get it that you get both the swappable tips and the TS100/Pinecil Adapter
• 1x M3 x 16 screw and nut
• 4x M3 x 20 screws
• I designed the base around this power brick from uGreen: https://www.amazon.com/dp/B0C3GTMX5M?psc=1&ref=ppx_yo2ov_dt_b_product_details
• 2x these glass bottle with needle dropper, one for liquid rosin flux and one for isopropyl alcohol: https://tecratools.com/pages/service/32108.html
• Heat set inserts M2-M6
• Wire strippers: https://www.amazon.com/Hakko-CSP-30-1-Stripper-Maximum-Capacity/dp/B00FZPHMUG

I would like to add better storage for the glass dropper bottles in the bottom storage, but have not gotten there yet. Maybe MK2!

I printed all the exterior part out of PETG, the internal spacers out of PLA, and the iron stand out of CF-Nylon due to issues with it warping when printed out of PLA or PETG. ASA or ABS might also work.