Pinecil Holder for Portable Soldering Iron Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model aims to swap the bearing holder to another one which could not soften with extended soldering sessions.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 172
- Wydruki
- 2
- Wyświetlenia
- 1722
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a grip hold for the Pinecil soldering used and it is aimed for use on Termiman's storage box or any of its variations.
The goal of the model is to have a reliable support for the soldering iron for extended amounts of time, as I had troble with the bearing/nut stands that are currently available, and there wasn't any suitable grip clip for the Pinecil, so I decided to make my own.
I would strongly recommend using PETG so it can wheather the heat and flex as it grips and releases the iron. As per printing settings 3 perimeters and 50% should be enough for this print.