Skadis Holder: Pinecil/TS100 Soldering Iron Tips (uses heat set inserts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Skadis holder for Pinecil or TS100 type soldering iron tips, using heat-set inserts and printed hooks for mounting
- Rating
- 3.5 / 5
- Likes
- 35
- Downloads
- 110
- Makes
- 2
- Views
- 1,910
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage.
Nice companion for mounting above the Skadis Pinecil holder/soldering station: https://www.printables.com/model/287837
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.
Required Parts
- Printed hooks
- See linked project for more details
- M2.5 heat-set inserts
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- Prusa Eshop ($11.99, 100 pcs)
- CNC Kitchen Store (€9.99, 100 pcs)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- M2.5 screws
- McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)
Printing Notes
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.