1 / 3
Dewalt/Milwaukee 18-20v Battery Nickel Strip Tab Shaper — zdjęcie 1
1 / 3

Dewalt/Milwaukee 18-20v Battery Nickel Strip Tab Shaper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Forms nickel strip for lithium battery pack rebuilding

Ocena
0 / 5
Polubienia
5
Pobrania
14
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also.

Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will work with narrower strip also, just make sure they are pressed against one side.

Tagi