Liczymy pasujące modele…
Used 2 self-tapping screws to attach to the shelf. Printed out in PET with at least 3 shells. Normal version for regular size tools. Bigger version for PASSK green impact wrench. Tested on: PABSP 20-Li C3, PDSSAP 20-Li B2, PASSK 20-Li A1,…
I couldn't find any low profile battery holders for my Parkside X20V Team batteries, so I remixed one! I designed this way back in 2020, but never published it. Sorry about that, here you go! If printed in the pictured way you don't need…
It Is simply holder for accu drill 20V, use 3x screws
Držák na baterie parkside X20V TEAM, tisknu ho se 100% vyplní a na podpěrách.
Overview: This is carrier for four Parkside X20V batteries. It is useful for storing and transporting batteries. The model is lightweight, strong, and easy to print, with tilted slots for quick battery insertion and removal. I recommend…
This is Lidl Parkside X20V Team battery adapter for Tiny e-Lab. Thank to this adapter and any Lidl Parkside X20V Team LiPo battery (2Ah or 4Ah) you can take your Tiny e-Lab anywhere. Adapter consist two parts: Front (pannel) and rear…
Why? I have a Parkside drill from the older 18V battery system, the new 20V system is not compatible. But there is an Action shop (France) close to my place where they sell cheap and quite nice 20V batteries for Ferm tools. How does it…
📝Description This is a 3D-printed adapter for the LIDL Parkside 20V battery that turns it into a portable power source . Thanks to the use of a custom-designed clamping mechanism , there is no need for glue to secure the connectors ,…
Support Batterie Parkside X20V Team Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,28 Infill: 40 Filament: Geeetech PLA Green Notes: Support Batterie Parkside X20V Team Category: Tool Holders…
📌 Introduction | 项目介绍 This project is based on an original 3D scan model of the Toyota 4A-GE 20V engine , sourced from: Bremar 3D Scan Store https://www.bremar3dscanstore.com/cad-models/p/toyota-4age-20-valve-engine 本项目基于 Toyota 4A-GE 20V…
transition batery parkside X20V to drill Metabo BZ12SP print: pla in the future I will also complete the project
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed. No glue required. The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm The inside dimension is a square with…
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
The minimalist wallmount I made (and other wallmounts for Parkside X20V Team tools) don't allow for usage of the original beltclip that came with the powerdrill at least. Thus in order to use the new minimalist wallmount I designed (…
Lets you get 20v DeWalt batteries off the counter. I'd recommend orienting the print so that the smaller flat side is on the bed, so that the layer lines are strong for the battery weight. I'd increase the number of walls as well for…
I would print a sample slice of the part before you print the full parts, your print setting may be slightly different than mine.
New and improved replacement for Parkside x20V Rivet Gun. It's a tiny bit larger but much more impact resistant than the original. It is very solid and I reccommend printing it in clear PETG or some sort of fiber reinforced filament, so…
A basic build to which additional printed accessories can be added. In the future, I will be adding more accessories such as a box for bits, drills, etc., but the basic build will still be the same.
После сборки первого варианта обнаружена проблема, между креплением провода на вводе малое расстояние, ввод отодвинул наружу, и увеличил планку. Сделать удлинитель из розетки, дополнительно понадобятся: Болт М4*10 - 2шт Гайка вплавляемая…
Added multiboard push-fit pins to the charger wall mount model from D.McReynolds
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
This adaptor converts older Einhell battery tools for use with current Parkside 20V battery. There is no difference in battery shape, as older Einhell tools use the same battery as current Parkside 20V battery. Only difference is position…
This minimalist wall mount holds a Dewalt cordless battery powered pruner. The screws go through the mount point so the tool is secure, can print with petg / pla doesnt matter as long as your screw is into something sturdy.
Simple, easy to print, tool holder for Worx 20V Max North American tools. Includes files for versions with and without storage for 5mm hex key. Mount with two screws 40mm apart. Shown with WORX WX801L Mini-Cutter. Works with Mini Chainsaw…
a 20v bauer tool mount with precision for holding tools extra securely you can mount it basically anywhere in any orientation though on a wall prongs down is not recommended but will hold most tools for best results: account for the…
Note: German description below. Replacement Spool Cap for Parkside PRTA Grass Trimmer – 3D Print Optimized This custom-designed spool cap is a replacement part for the Parkside PRTA grass trimmer, specifically optimized for 3D printing.…
Added multiboard push-fit pins to the charger wall mount model from D.McReynolds
После сборки первого варианта обнаружена проблема, между креплением провода на вводе малое расстояние, ввод отодвинул наружу, и увеличил планку. Сделать удлинитель из розетки, дополнительно понадобятся: Болт М4*10 - 2шт Гайка вплавляемая…
Wall mounted horizontal holder for x20V team Parkside batteries. Tested on PET-G. Can hold a 8Ah Smart version, not sure about 12Ah version. No supports needed.
This is a screw-mounted safety cover designed to prevent accidental use of a 220V power outlet in 110V homes . In my house, almost all outlets are 110V, but there is a single 220V socket. Over time, different devices were accidentally…
I would print a sample slice of the part before you print the full parts, your print setting may be slightly different than mine.
youll need the : PD65W Schnelllademodul Typ-C USB-Schnittstelle unterstützt PD3.1 QC3.0 SCP PPS Schnellladegerät 5V 9V 12V 20V - AliExpress 502 for normally 1,51 € 4x M3x8mm -two cable -2x spade connectors
📝Description This is a 3D-printed adapter for the LIDL Parkside 20V battery that turns it into a portable power source . Thanks to the use of a custom-designed clamping mechanism , there is no need for glue to secure the connectors ,…
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
I baught a Multitool by Scheppach and build an Adapter to power the multitool using the Gomag Battery. Print with small layer height and Support. It needs two 1,5mm² cables with each 64mm long.
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
Battery Holder – Parkside 20V & DeWalt 18V Practical and compact holder for two batteries, compatible with Parkside 20V and DeWalt 18V batteries. Perfect for workshops, garages, or on-the-go use, keeping your batteries organized and…
I got a 2AH battery and needed to make something to hold it in my toolbox. It is already 2 rows wide, so I added in some additional storage for you to forget where you put your bits, too. Looking for the 4AH version? Check here for…
This started out as just a battery powered 12V car accessory outlet that evolved into this finished model. The main printed parts are the main case, handle, and base. Not knowing if extended use pulling several amps would heat up the…
Well, I needed a different size battery holder yet again. This time, for a DeWalt 5AH 20 Volt battery. It fits with Gridfinity and keeps it in the right space in my drawer. Looking for the 4AH: Creality Link…
This is a remix of the holder by WICKID. You will need 2 x (9 mm Small Thread, Flat Head, T-Bolt) to mount this. You can find the T-Bolt model at…
📌 Introduction | 项目介绍 This project is based on an original 3D scan model of the Toyota 4A-GE 20V engine , sourced from: Bremar 3D Scan Store https://www.bremar3dscanstore.com/cad-models/p/toyota-4age-20-valve-engine 本项目基于 Toyota 4A-GE 20V…
Jestem amatorem, to mój pierwszy samodzielny projekt. :) Model wykonany z silniczka do mikrofalówki AC 220-240V. Oparty na częściach dostępnych na allegro. Średnica platformy 200mm. Prędkość około 4-5 obrotów na minutę. Dwa kierunki…
I used it to mount the charger PLG 20 A1 to my opengrid wall with the openconnect system The charger snaps in quite nice and the holder its perfect. Thanks for creating and sharing the model! https://www.printables.com/@Testurbator_503491…
TOTAL 20V (P20S) power tool battery bracket / mount, for holding & charging/hanging your TOTAL batteries up on the wall in your workshop space. the cover is if working as charger. Features recessed countersunk screw holes. Printed flat on…
This model is specific for Parkside 20V Cordless LED Hand Light Holder (IAN 494206_2504) I use this flashlight as an emergency lamp in my workshop. You can mount the lamp on the wall using two anchors, or wherever you prefer. Printing…
Small holder for 2 Worx Powershare 20v accus. Including mounting holes. I was tired of having the batteries lying around the workshop, so i created a small holder for 2 batteries to be attached to a wall.
Printed with SUNLU TPU 95A no supports Print with wider side down.
DeWalt 20V Tool Mount for Multiboard A wall mount for DeWalt 20V cordless tools, remixed to clip onto the Multiboard. Holds the tool by the battery foot — drop it in, lift it out. Original mount by cliftoce on Printables ( link ); this…
PETG , 3 perimeters, 20% infill, supports needed
My own version of the DeWalt 20v Leaf Blower Wall Mount Simplified down and optimized for no supports On my K1 Max PETG, 0.3 layer height, regular speed, 15% infil Takes about 1 hour
Parkside X20V basic Adapter Not much to say here. If you found this, you know what you need :) Disclaimer: Those batterys pack quite a punch. If you short them out or start a fire using this design, I can't be held liable. Please print…
I have prepared a simple soldering station project using a PARKSIDE 20V battery and a QUICKO T12-942 soldering iron powered by 24V. The result is a handy portable soldering iron. The replaceable soldering iron holder covers the entire…
Sturdy wall mount for the Dewalt DCH273B SDS Rotary Hammer Drill. Built in spacer. Use the spacer to level and install 2 screws. Easy to print. Also is said to work with Makita Hammer Drill DHR171
Print with back facing build plate. This will create a tall but workable print. Use support for the inside. I printed with PETG while using brim.
This wall hanger uses 3 screws to secure the mount to the wall. It will hold the Dewalt tire inflator with or without a battery inserted.
Worx 20V Max Battery North American Style 1-4 Place Battery Non-Latching Holders Includes files for 4, 3, 2 and 1 battery holders. Includes files for 4, 3, 2 and 1 battery holders. Two versions, one set with minimum holes at random…
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
There are 2 files here, one for the 12V tool and one for the 20V tool. Both hold 3 hex bits. Printed on Prusa MK3 with PLA. No supports needed.
Držák na baterii Parkside X 20V Team (model pro 3D tisk) je speciálně navržený pro bezpečné a efektivní uchycení baterií z této série na stěnu nebo jiný pevný povrch. Tento držák je ideální pro všechny, kteří využívají více nástrojů z…
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
I used 25% infill with the print standing up. PETG recommended. 4 hour print time. No brim needed.
The one by Nrdaeger for the 20V Max doesn't fit my non-Max driver, so I extended it, and simplified the sides so now it fits both my driver and my impact driver. Category: Hand Tools
This is a bracket that lets you hang a Dewalt leaf blower on a wall, post, etc. Original parametric OnShape document is free for editing.
Univerzalni drzak na vrtacku, razovy utahovak. Parkside zelene do toho pasuji. I svitilny na Parkside baterie.
Tool holder that grabs the tool from the battery slot. Designed to hold the drywall router and flashlight, should be compatible with more 20V Dewalt tools. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with no…
Tool holder that grabs the tool from the battery slot. Designed mostly to hold the Dewalt orbital sander, should be compatible with more 20V Dewalt tools. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with tree…
Remix of ntressler7's Dewalt battery holder, replacing the screw mount by multiconnects. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with tree supports for the muticonnect snap pyramid
This is remix of the Parkside 20v Battery holder. The base is a few mm thicker to support 3mm bolts to be sunken.
A wall bracket to hold 20V Worx batteries. This has a longer cut-out for the notch on the batteries; and has been tested to fit WA3575 and WA3525 batteries. The corners of the bracket have also been rounded. This has been printed…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. DeWalt tools have internal electronics that signal the…
Mobile light for 20V Prakside Li-Ion-batteries. Runs for ~20h on 2Ah-battery. Materials required: 6x 10cm LED-stripe 24V (I used my left overs form my prusa-printer enclosure) switch for rectangular 9x15mm cut-out 2x M3x15mm + M3 nuts for…
TPU enclosure for a USB PD trigger board labeling imprinted. Print in TPU, secure cable and board each with a zip tie.
Print this in whatever material you like. Switch filament at the appropriate layer for contrasting color infill. You will need 4 ea, m3x8mm socket head cap screws and m3x5 long, ish heat set inserts. If you are unsure about the heat set…
Protože se mi na aku vrtačce porouchala stará originální baterie, byl jsem nucen popřemýšlet o náhradní variantě. Vzhledem k vysoké ceně originální baterie jsem vytvořil přechodový model pro aku baterii PARKSIDE, která cenově vychází na…
For mounting on your Multiboard wall use e.g. Pegboard Click
Wall Mount for DeWalt 20 volt chargers. Also works with Milwaukee 12v chargers If you like my models please follow me on insta @shorcodesign Attach base plate to legs with M3 cap head screws Add screws to the required mounting holes: -4…
I was tired of my car charger extension cord (the thick 220v/240v dryer cord type) lying on the ground so I designed this very simple wall bracket to hold it. approx. 6 inches x 2 inches
GOEWS Dewalt 20v battery holder to work with GOEWS https://www.printables.com/model/1090032-goews-gridfinity-over-engineered-wall-system
Modifies the cheap router that was under 35 bucks on Aliexpress including 3 different collets. There's another similar adapter online but it did not fit to the router as the battery could not lock into place, the radius did not fit the…
small battery holder that will hold any dewalt 20v or 60v battery in any position. I created this to sell on etsy and have since closed down my store. so print away! I have about 15 batteries ranging from the newest lithium ion batteries…
https://www.proteco-naradi.cz/aku-program_c191701570289912/vysavac-aku-180-w-bez-aku_p60338
The base doesn't need supports, the top lid does, but they are minor and come out very easily. Assemble the G9 screw-base holder with some glue to the base using the pre-designed anchoring guides, pass the wiring through the hole in the…
Mount the battery holder with the arrow up with any wood screws, and store your batteries somewhere safe! Print with PETG/ABS recommended.
New Case for stepdown converter to use it with 12v appliances
Protects the battery contacts from dirt and indicates a charged battery.
Protects the battery contacts from dirt and indicates a empty battery.
The power pole connector has been cut on the back side to make more space for the cable.
Ability to hold 13 bits (4 long bits/adapters + 9 short bits) Easy to insert/remove bits with precise tolerances, no magnets needed Locks in place securely with 2 belt clip screws (2x 3x10mm https://amzn.to/42ltgbb ) Driver/drill can…
Honey Comb wall Hyper Touh 20v Cordless drill
Original: https://www.thingiverse.com/thing:4866839 Recut with a little more tolerances (rails and ends). Added ID pin (required for a project of mine)
Holds attachments for Dewalt DCE100 mini blower. Locks into the main hose assembly at base. Printed with 4 perimeter walls, 40% infill using Carbon Fiber PETG. This thing takes a beating, so at the very least reinforce the attachment pegs…
Print as in STL file (no supports), insert in frame, rotate 90 degrees clock-wise to lock, slide in cable, done :) naming I find it hard to describe the clips/clamps/thingies so I decided to give them a name. Bill: The Bill clip is 10 x…
