Shaper Cutter Storage Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model contains 3D printed parts for storage of spindle molder (shaper) cutterheads.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This model contains a number of 3D printed parts I used to store shaper cutterheads in either wooden drawers or adhere to a metal drawer bottom. Several heights are provided and one of the designs provides a 2mm thick flange on the bottom to either lift the cutterhead off the drawer bottom or make it easy to remove adjustable groover spacers.
The holes are sized for a #8 x 1-¼" screw and the model with the bottom recess is sized for a 1" x ¼" Neodymium disc magnet. I used N42 magnets but would upgrade to N52 magnets if I were to make these again. The N42 holds securely enough but, will slide horizontally with a bit of force.
I printed these with PLA, 4 walls and 15% infill. This seems to be adequate to securely hold any of my cutterheads.