Shaper Cutter Storage Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model contains 3D printed parts for storage of spindle molder (shaper) cutterheads.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This model contains a number of 3D printed parts I used to store shaper cutterheads in either wooden drawers or adhere to a metal drawer bottom. Several heights are provided and one of the designs provides a 2mm thick flange on the bottom to either lift the cutterhead off the drawer bottom or make it easy to remove adjustable groover spacers.
The holes are sized for a #8 x 1-¼" screw and the model with the bottom recess is sized for a 1" x ¼" Neodymium disc magnet. I used N42 magnets but would upgrade to N52 magnets if I were to make these again. The N42 holds securely enough but, will slide horizontally with a bit of force.
I printed these with PLA, 4 walls and 15% infill. This seems to be adequate to securely hold any of my cutterheads.