MK4S 10-Min Benchy — Super High-Speed PrusaSlicer Project (35 Mins to 10 Mins!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
From 35 Mins to 10 Mins! This prints project has the settings to print a SpeedBoatRace compliant Benchy 25 mins faster!
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 301
- Wydruki
- 4
- Wyświetlenia
- 834
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Shave ~25 minutes off a stock Prusa MK4S 0.25 SPEED 3DBenchy. This project file has many performance changes so you can hit ~10 minutes while staying SpeedBoatRace-compliant (standard materials, ≤0.25 mm layers, two walls, 3 top/bottom, ≤0.5 mm line width, 10% infill). Print Benchy's 4 Minutes faster than even the pre-sliced custom tuned SpeedBoatRace-compliant gcode included on the Prusa USB drive!
What’s included
- .3MF PrusaSlicer project
- Pre-sliced GCode
Requirements
- Printer: Prusa MK4S (Mine's stock, this would probably work on a Core One too)
- Nozzle: Stock Prusa MK4S 0.4 CHT or other CHT option
- Filament: PLA/PLA+ recommended
Tips
- Delete the Benchy and use this profile to print whatever you'd like, FAST!
- Enabling Retractions again adds a little time but makes the profile more useful for things other than Benchy's.
- Dry yo filament
Enjoy seeing your MK4S move in ways you never thought possible!