Counting matching models…
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
I needed a template of the fixture plate for a Harbor Freight Bauer drill press to model up work-holding solutions.
A replacement zip tie mounted TPU case for WAHOO RPM SPEED sensors
Gopro mount + gps for speedster Gopro mount + gps for speedster pro Fin + gps mount for speedster Fin + gps mount for speedster pro
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
I've reverse-engineered and refined the original system to enhance usability and design quality. Here’s what I’ve changed: Improved Pillars: Redesigned for easier assembly with better clipping functionality. Added chamfers to the edges…
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Speed loaders for Mossberg MC2 and MC1 9mm handguns. The MC2 loader is somewhat of a snug fit which made things easier for me. If you want a looser fit you may want to scale it up 1-2%. I have confirmed that the MC1 loader is also…
Mat Clamp for Young Joe Speedcubing Timer Description I created this model to help me clamp my Young Joe Speedcubing Timer to my homemade mat. I highly encourage you to do the same, instead of buying expensive mats that even then you will…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
Holds all 4 nuts while you torque the 4 bolts with a driver. Saves time when setting up a new deck. On a deck that is already set up, the nuts might not be lined up with the wrench. You can apply pressure as you turn the bolt with a…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Conditions d’utilisation : Ces fichiers sont fournis uniquement pour un usage personnel. Ils ne peuvent être ni vendus, ni partagés sans mon accord. Revivez l’époque des Peugeot sportives avec cette reproduction fidèle de la mythique…
Will probably not fit other bikes as it hides the sensor in a very specific part of the frame. It uses 2 zip ties and an M4 bolt, and integrates a cable guide. I use it with this magnet holder:…
Variant of the Divider STL file to have the "click" when mags are inserted for a better lock.
Now this took me some effort. This is an analouge to the Odin, yes, however they only share the same principle, (and naming conventions because irony). Chernobog has features. Hand crank for loading with one hand holding magazine with…
Hi Folks! I created a simple shelf mount for my Speed Champions F1 Cars. Don't waste space on your shelf anymore :) print glue the two parts together screw it in place Have fun! Printed with default .2 settings. No Support needed. Place…
Sonic the Speed Monkey from Blood Blockade Battlefront! If you enjoy the model please like and follow for more!
GPS mount for the GEPRC M10 module, designed to fit the popular SpeedyBee Mario 5 frame. The mount retains compat With the release of the new DJI O4 Pro Unit, a new mount for two antennas has been developed. Each antenna is secured using…
This ship model is exported from the following animation, made by me: Exporting this ship model took a lot of work! But here it is for your Sci-Fi figurine collection, in case you want a fun little ship to gift to someone. Enjoy!
Speedybee Mario 5 led strip mount, you need to cut a bit of the sides of the led strip
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers. There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly. 🔧…
This part goes under the dial wheel and keeps it connected to the flash body. Print with supports and precision settings with low layer height.
Adapter to attach a shoe mount accessory to the Speed Graphic's viewfinder mount. Mount a flash, trigger, light meter or any other cold shoe accessory to the Graflex body. Flash sync with the focal plane shutter will require an expensive…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Modelo creado para poder poner todos tus legos f1 como si estuvieran en la parrilla de salida . No es necesario el uso de tornillos para su montaje esta diseñado para poder pegarlo con cinta adhesiva o cinta de doble cara. Existen dos…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
A remix of the excellent resin tank drainer by @K9DefenseTech_8289 . It holds the SL1S resin tank vertically with a slight forward tilt, so that the resin flows smoothly along one corner into a container below. I wanted one to fit a…
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe…
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.
I modeled the buckle exactly like the original 1:1, in case the original buckle breaks. Works with NABAIJI swimming goggles from DECATHLON
This is a custom made wall mount for the Lego Speed Champions BMW M V8 Hybrid LMdH Hypercar. It holds the car with the wheels to the wall and the rear wing up. I have found that command strips work best for this, by attaching 2 velcro…
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
I made this to integrate into a project but ended up going in a different direction. Could be useful for someone so thought I'd share the model. Modeled after a Powertech branded unit. I've seen similar around under a few of different…
Intended for use with the EDU Wind Tunnel Github Repository to add Arduino based airspeed measurement and control to your Modular STEM Wind Tunnel project. See the GitHub repo for full documentation and details of use.…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
Purpose This spacer allows the original GPS mounting spot on the Speedybee Master 5 v2 RC drone to be filled. Hardware TPU or similar FLEX For printing the mount. Original screws To fasten the spacer.
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
You need M3x40 screw to mount dragonburner to the carriage. If you want to print without supports you can rotate mount by 45 degrees and then cut 4mm from the bottom, it prints nicely like that.
By default the Bee25 does not have a way to mount the o4 air unit which is why I made these case and camera adapter pieces for. The camera adapters utilize the default DJI provided camera cover + screws. Additionally the adapter provides…
Fly and speed through the Crash Derby board game with this replica model of the Land Speeder driven by Luke Skywalker as seen in the original Star Wars. I remixed the model from the prolific Jace1969 to make one suitable for a smaller…
This follow-focus speed crank works fantastic! Make sure to CA glue the knob to the handleshaft. There is a print-in-place ball bearing inside the crank lug. I recommend printing the threaded handleshaft vertically using a super wide…
I rebuilt the original speed cable mount for the Yamaha YBR 125 motorcycle. Enjoi! It's free :D
To be mounted with two 3mm flat screws (6mm head)
I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…
I made a mount for the Speedybee wing mini flight controller for the AtomRC Dolphin base to fit the "AtomRC Dolphin Base Plate For SpeedyBee F405 Wing" ( https://www.thingiverse.com/thing:6070334 ). Not a remix, but I figured it be easier…
This 80x80 mm flat platform can be mounted on Speedplay legacy clipless pedals without any tools. The sliding tray locks the spiked top to the Speedplay lollypop. This pedal platform is intended for short rides only. The release knob…
Display stand for LEGO speed champions cars. I would recommend clipping one underneath each wheel-attachment block, but I have found other attachment points work for different aesthetics. The .gcode files are in the .zip folder because…
Work in Progress – High-Speed Maglev Train (Concept / Morph Design) This project represents an early concept design of a high-speed maglev train inspired by various Transrapid generations, but intentionally not based on a specific…
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
This 3D printed fan has an approximate weight of around 100 g and is designed as a lightweight and practical solution for efficient airflow. Most of its structure is made using 3D printing, giving it a compact and simple design. The fan…
Soft TPU camera mount for DJI O4 Pro in the SpeedyBee Mario5 frame. Keeps the stock-style mounting, but adds clearance so the M2 camera screws don’t touch the aluminum side plates , reducing vibration transfer into the camera. Note: you…
A simple speedloader for CZ Shadow 2 mags I made. Wasnt a fan of the other models out there so heres my version. Feel free to remix if you so desire. I printed mine in PETG with a .15mm layer height and 40% gyroid infill with 3 perimeters…
This sleek vertical mount showcases the Aston Martin Aramco Formula 1 car in a striking top-down view. The minimalist white stand features a secure bracket to display the aerodynamic chassis, anchored by the team’s logo and a racing…
This is a canting screw for Nordica Speedmachine 120 ski boots (2020 model). Compatibility: This screw does not fit newer models! Purpose: It serves as a replacement for lost screws that are no longer available from the manufacturer.…
The Garmin Bike Speed Sensor is intended to clip around the hub of the front wheel of a bicycle, and the Rogue Echo air bike is a great indoor exercise bike. But trying to get the sensor around the hub of the fan wheel on Echo was a…
Print it laying on its back with supports on. I've only tested it with Canik mags, could likely easily be modified to fit other mags as well.
This is an improved speed bar skid for Moyes Litespeed RX gliders. It has been tested and tweaked to be a tight slip-on fit for the Litespeed carbon fiber basetube. It helps to keep your base tube out of the gravel during setup or while…
For Glock 9mm Double Stack Magazine Engineered for comfort, speed, and reliability, this Glock 9mm magazine speed loader makes reloading effortless. Its ergonomic design reduces thumb fatigue while allowing smooth, consistent…
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
This is a simple, no supports needed (might need a outer brim for support while printing) bracket to be used on the Honeycomb Storage Wall system to display your Lego F1 Speed Champions. Check my profile for other bracket orientations for…
this is a simple 4-speed gearbox designed for diy ,school ,and hobby projects
This my version of the Wave motion machine base for DIY. This version has variable speed and a LED strip. Its powered by a 15V power suply. It is inspired by this video by Techmoan and Hughes Wave Motion Machines LLC: See it here: The…
It’s a scroll wheel for the Speedlink Piavo Pro mouse. Mine broke, and I couldn’t find an existing model, so I created one myself. It’s non-standard and has a groove. Maybe it will be useful to someone. Printed in PLA with supports.…
this is speed coil from an upcoming Roblox game called survive the griefers I’m helping work on the game and decided to make speed coil from it, I might make regen coil and speed coil.
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
Ferrari Logo – The Icon of Speed The Ferrari emblem, crowned by the legendary Prancing Horse , stands as a timeless symbol of power, precision, and pure automotive passion. Printed in deep black PLA, the silhouette gains an even stronger…
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
A simple bracket for hanging your LEGO F1 car from the wall. Contains a hole for one screw (max 4mm). Print settings: 3 walls, 0.25mm layer height
Simple Lego Speed Champions stand for 2 or 3 cars. Maybe in future, 4 cars stand will come. Easy to assembly, no glue or screws. Only slide in, holds with own strength. Designed for 8 stud cars. Small dent for tyres and for better…
Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
This Gridfinity insert for the Rode VideoMic II provides a secure and organized storage solution for your microphone within a Gridfinity system. The model is precisely designed , sturdy, and optimized for fast, reliable printing .…
I really like this mag pouch so I added my favourite symbol to it for a pop of colour. Feel free to make it yourself if you need to add some colour to your gear, or if you are just a fan of peace :) Your model will not include the text…
Display Stand for LEGO Nissan Skyline (Fast & Furious) A custom display base made specifically for the LEGO Nissan Skyline (Fast & Furious) . The stand is designed to present the car at a nice angle with a clean “showroom / movie-poster”…
This is a simple 2-level car lift/stacker made for LEGO Speed Champions. It lets you park/display two cars in the space of one, perfect for shelves or a garage display. I printed mine in PETG for extra strength and durability. The model…
This is an add-on for the Speediance Gym Monster handles. The project started when I noticed the straps of the handle cutting into my hand while I was doing hammer-curls. As usual, I over-engineered a solution to the problem and after…
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
Overview: First of all, feel free to ask questions and leave sugestions what to add to the MMU/instructions. I built WKMU based on the working principles of AMS Lite (Didn't know that at the time). It uses 4 secondary stage extruders that…
replacement straps for the sks speedrocker raceblades. use them en they have seen al kinds of weather, wat, cold, freezing, ... the just keep up. TPU 95A was used, softer would be better. wall count and infill will give flexible or sturdy…
Here I 'am again with my latest yoyo that l've been sitting on for a couple months, Speed Rims. Speed Rims is a yoyo that is 3d printed from 4 pieces instead of 2, the yoyo consist of 2 rims and 2 wheels/body. l made more than 4 separate…
The Time Machine has officially taken off. I designed a custom flying display for the new Lego Speed Champions Time Machine from Back to the Future, and this one is all about motion and drama. The car is mounted in a slightly angled…
This is basically a system of gears, which maybe increases the speed of the last gear! The printer is advised to print at least 4 gears, attach the gears into the two rods kinda things and then attach the handle and rotate! Yay, it's…
This is a remix of "The Part" by emm0sh, remixed with permission (no selling allowed). I wanted to use this as a nice technical model display piece, but the original geometry was designed to torture test Subtractive Manufacturing, making…
please like and follow and comment any other paintball gear you guys want
This is a Base Plate and Loading Ramp to speed up magazine loading when using the Ludex Glock Speed Loader available from Amazon. There are two .STL files, one includes holes for 4mm screws/thumbscrews to secure the Ludex unit to the…
I added 90 degrees holes between original holes to make soft box tighter. Holes are 3.5mm. If someone needs wider, please write.
este accesorio es un omenaje altaller de mecanica overspeed con mucho amor y respeto a sido creado para el role play de gta5 (fivem) como accesorio para uso digital y hoy quiero hacerles llegar a todos los que la querian en la vida real…
Remixed for 11-speed from the original by CinciJeff : Jockey wheel scraper for Shimano 12-speed chain
