AR-15 5.56/.223 Speed Loader
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed from https://www.printables.com/model/786343-ar15-223556x45-speed-loader-5rds with some improvements.
- Rating
- 5 / 5
- Likes
- 349
- Downloads
- 2,007
- Makes
- 9
- Views
- 10,274
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏
Differences from the original:
- Added clearance for rounds
- Added captive guides to the pusher to keep it engaged
- Rotated viewing slots to allow printing on the side
- Pre-tensioned magazine catch
- Removed excess material
- Added chamfers and fillets for comfort
I recommend printing the case on its short side so that the magazine release is strong and flexible. The catch in the original model has a tendency to snap when printed vertically.
The modified pusher can be printed in any orientation, but on its broadside yields a strong part and can be printed with no support.
I printed this in ABS on an X1C, 0.20mm layer height with manual tree supports only on the largest overhangs, 15% gyroid infill.