AR-15 5.56/.223 Speed Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from https://www.printables.com/model/786343-ar15-223556x45-speed-loader-5rds with some improvements.
- Ocena
- 5 / 5
- Polubienia
- 349
- Pobrania
- 2007
- Wydruki
- 9
- Wyświetlenia
- 10 274
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏
Differences from the original:
- Added clearance for rounds
- Added captive guides to the pusher to keep it engaged
- Rotated viewing slots to allow printing on the side
- Pre-tensioned magazine catch
- Removed excess material
- Added chamfers and fillets for comfort
I recommend printing the case on its short side so that the magazine release is strong and flexible. The catch in the original model has a tendency to snap when printed vertically.
The modified pusher can be printed in any orientation, but on its broadside yields a strong part and can be printed with no support.
I printed this in ABS on an X1C, 0.20mm layer height with manual tree supports only on the largest overhangs, 15% gyroid infill.