Keltec P32 Magazine Speedloader (and P3AT)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.18 – €1.44 net (excluding VAT)
For file: P32 Magazine Speed Loader v4_0.2mm_PLA_ENDER3_1h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.31 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple magazine speedloader for the Keltec P32 (32ACP) and P3AT (380ACP)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 113
- Makes
- 1
- Views
- 447
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat.
Print it upright with a 10mm brim and organic (tree) supports for angles less than 30 degrees. One support tree will rise up in the middle to support the plunger and top. The support is easy to remove with the aid of a tiny screwdriver.