Counting matching models…
Was looking for speed loaders with a better one handed grip and decided to make one for 9mm and 45 ACP Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament:…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .45 ACP Cartridges in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
Both are printed with the small face at the top on the buildplate without supports, step files are available.
.380 ACP, also known as .380 Automatic Colt Pistol, .380 Auto, 9x17mm, 9mm Browning, 9mm Browning Court, or 9mm Short, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1908. Print this for…
.45 ACP, also known as .45 Automatic Colt Pistol or .45 Auto, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1904. Print this for props, display, education, training, just because it's cool,…
The .45 ACP (Automatic Colt Pistol, also known as .45 Auto) was designed by John Moses Browning in 1904. It was adopted as the standard chambering for Colt's M1911 pistol. Category: Sport & Outdoors
Fits 21 rounds of .45 ACP Should fit 2 side by side in an ammo box might need a little scaling. I based the lid off of another ammo box i saw someone made but wanted one in .45
Ammunition box for 100 rounds of 45 ACP Kept markings on bottom case for easy counting by 5 bullets from original model Printed with 5 walls and 25 percent infill. Latches 100% in-fill, printed on a side. No supports. 6X M3x30 screws…
Vase print of a 32 ACP (Automatic Colt Pistol) cartridge based off of SAMMI drawings. Intended to be a dummy round AKA a snap cap. 0.6mm nozzle, printed in PETG, 0.15mm layer height. Have not tested in equipment, but recommend you print…
First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself. To be honest, they would have to be varied depending on the motor you have, and the gearing that works for you. Also,…
So finally, I have managed to design, the "lock switch" into the outer casing/shell. This case fits both the Raspberry Pi 3B+ & 4B. Since many have asked me, if they could fit an SSD inside these, then I choose to make a mount for one of…
My use case is for my gun closet that is getting pretty full. Wanted a gun mount that keeps them close to the walls and won't get in the way of retrieving long guns. Also, I needed the mount to fit any handgun of a caliber not just gun…
after almost a whole year, I have finally managed to finish this raspberry pi case (thanks to stress and depression -_-" ) The case supports both the pi 3 and pi 4, but I have only made an io shield for the pi 3, since I really couldn't…
this is my first draft on a Mac Studio Raspberry pi case, it is a 1:1 (or as close as i could get with pixel measurements). >> this is just a draft model, im planing on changing a lot about it in the futur to make it better << this case…
45 ACP ammo box. Holds 50 rounds. Printed in PLA Matte, but choose what works best for you. No supports needed. If you want you can use a few drops of superglue if you want to hold the tray in permanently. On the side of the box you will…
Hello, this is an ammo box designed for .45 ACP rounds. It is a waterproof and rugged box for long term storage, and also compact enough to bring to the range. Print Settings: Base and Lid - PETG or ABS recommended. Increase top and…
This ammo storage bin is designed to fit the Harbor Freight STOREHOUSE 20-Bin Medium Portable Parts Storage Case and hold multiple calibers in one compact unit. Perfect for keeping small arms ammunition organized within your modular…
45ACP Snap Cap / Dummy Round 2 Models 45ACP Brass Model 45ACP Full Cartridge (With Bullet No Supports Print high infill, for cycling, the rim needs to be very strong, so use a strong material.
I always wanted to use an ATX Windows PC inside a MacPro housing with retaining the original looks as much as possible. I looked at the laserhive(https://thelaserhive.com/product-category/mac-pro-kits/) conversion kits, but did not like…
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
Box for 25 cartridges 7,65 br / 32 ACP. Easily remixable - just find the dimensions of your cartridge and scale it according to the “rule of proportion” directly in the slicer.
I needed a simple magazine storage container to house my extra, loaded LCP2 380 ACP magazines. I built 2 versions, a single and a double holder to house both the standard 6 round magazine as well as support for the extended 7 round…
There are a few great fusion 360 parametric box generators out there. However On-Shape didn't seem to have one so when I needed a box for some loose ammo I designed one. All screws are 3mmx30mm screws. One side should be loose one side…
TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…
This is .45 ACP stacking loading block. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: none Notes: Print in Spiral Vase Mode with double your regular Perimeter Extrusion Width (0.9.) Category: Tool Holders & Boxes
Hi ! I would like to make the ACP Shotgun from Star Wars Republic Commando, i add some details because it's an old game. Its scale is 1:1, but check the size for your use. The axis of Highpart1allows to turn the rest of the gun to reload,…
0.24 layers, 15% infill gyroid, 3 walls. PLA or PETG
.45 ACP reloading tray. Print however you like. Holds qty 50
Tactical bead can be used to compliment any lanyard on a knife, flashlight, or keychain. Work great as a zipper pull.
Remix of the rugged box to accommodate ammunition in 9mm or .380 200x185x60 version can house 2 x dividers each holding 240 cartridges plan to add thing foam to the lid and underside of top divider. scale down to 10% models are huge
his is Spiral Vase Mode .45 ACP stacking loading block. Revision History: 05/14/2023 - Fixed *-50 and -25 slot cut into lip. Category: Tool Holders & Boxes
This is a Raspberry Pi case, designed to work with the Pi Zero and Zero W, it is designed look like the Trash can Mac Pro scaled down to just half the size of the original one (47/100) The intention with this case is being used as a small…
This is a .380 ACP prop/dummy cartridge material: PLA slicer: Cura layerheight: 0,12mm infill: 10% infillpattern: triangles If you find any errors with the model please let me know EDIT: dimension Error should be fixed
( If you are considering printing this, then please check out my V3 of this case, with a functional slide lock) This is a Raspberry Pi case, designed to work with the Raspberry Pi 3, it is designed look like the Trash can Mac Pro. The…
Overview: BrassEnds are bullet-inspired drawstring beads that add rugged EDC style to your everyday carry, apparel, and projects. The .45 ACP Edition takes things up a notch—bigger, bolder, and ready for action. This version includes two…
If model is to large when importing scale to 10% of the original size.
🔹 Overview This is a 1:1 scale, high-detail replica of the legendary .45 ACP round — famous for its stopping power and iconic use in the M1911 pistol and countless other firearms throughout history. Perfect for collectors, cosplay,…
Mid/Late 2000s Mac Pro cases are beautiful! However, it's hard to keep up with evolving technology with the quickly depreciating IO and internal components. A great way to preserve the old Mac style and gain more power is case conversions…
.380 ACP / 9X17mm stacking loading block. Category: Tool Holders & Boxes
This model is exactly the same dimensions as the actual round, so this model is better suited for Stereolithography type printers. Final sanding may be required.
An other designe of reloadig tray. I make it for 9mm, 357 an a second for 45 ACP now you ave 44 mag
This is a remix of my original box. In this version, the lid slides in instead of being a clam shell type box. The lid also has a graphic. While I designed it around my Webley MKVI, my S&W 1917 and 22 having moved on, both the box and…
Springfield offers a 7-round magazine for their .45 ACP XD-S original model , but not (yet?) for the newer XD-S Mod.2. The “Mod.1” magazine will not fit into a Mod.2 receptacle due to interference with the plastic grip extension. However,…
45ACP Bullet magnet for fridge or whiteboard. Uses 8x3mm magnets. 2 separate stls for case and bullet for easy printing. I printed the case using "middle" slicing tolerance and printed the bullet using "exclusive" slicing tolerance in…
Print with a .4 nozzle. .45 wall width .2 layer height No arachne
Replica of .45 ACP bullet in 3:1 scale. I made it as box with srew top. I printed it from silk PLA with 0,12 layer In raw files u can find original dimension of bullet.
I created multiple versions of some trays to hold 45acp ammo in retail boxes. Per the file names: The SM is a smaller tray for smaller boxes. The LG is slightly larger for larger boxes. The ‘Tall’ are 4mm taller than the ‘Short’. Both…
Bullet feeder plates that fit the Frankford Arsenal Bullet Feeder. Rifle bullet plates are not available from FA, and each of the pistol calibers are purchased seperately (with a bullet dop and seater). I built these to fit the collator…
Please Note: This is an outdated version. New and improved design available . This little thingie lets you use an empty 9 x 19 casing as a handle for IKEA cabinets and drawers. Designed for the screws that come with your IKEA furniture…
Here are some 45 AUTO (ACP) storage boxes and trays. These are designed to be able to arrange large amounts of bulk ammo into either a 50Cal, 30Cal, or PA108 standard ammo boxes. I designed one model so that three boxes can fit either the…
[DESIGN IS CURRENTLY IN BETA] Updates may be few and far between. The current design is still very much a work in progress but will function and print well once tuned [DESIGN IS CURRENT IN BETA] Originally based off an existing modified…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of .45 ACP Auto cartridge. For Colt 1911, Glock .45 cal. and others. The cartridge is suitable for exhibition, decoration, or perhaps as cosplay. The…
Minimalist reloading tray for holding .45 ACP rounds. Based on the 9mm design I found here https://www.printables.com/model/218307-9mm-reloading-tray-25-count but I simply needed a .45 ACP version so I created this one from scratch. Easy…
This is another iteration to improve the design. There is only 2 parts to source: 2 x finish nails..1.6" or 1.6mm dia shank. The gasket is TPU 1.6mm dia. I have used PLA for the body and lid and PLA for the ammunition insert. I have…
Bit Halter für macpac Ich habe für besseren halt noch einen rutsch festen Gummi unten angebracht.
Printed in .25mm layer No infill needed and no supports Noticed the bottom layers were a bit thick, The easiest current fix is just lowering the position of the model in PrusaSlicer. Currently working on a version for better stacking
.380 ACP / 9X17mm Vase Mode stacking loading block. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: none Notes: Print in Spiral Vase Mode with double your regular Perimeter Extrusion Width (0.9.) Category: Tool…
I threaded the holes for the ball spring plungers(M4x0.7) so no need to tap them, also made the hole wider to accomodate the screw head for the M3x20 screw. I have included the blender file, and an stl. Print Settings Printer Brand:…
Reloading block designed for the .380 ACP. Could also be used with 9mm.
This is a mag pouch for a 1911 magazine that can clip on to a waist belt. The sides are tapered on the inside to grip the magazine.
Hi! This is my first vehicle model, so it has some problems that must be dealt with in the future. First of all, you need to have two more components that aren't printable and those are: -M4 Nut -M4*35 screw at least +little bit of spare…
I needed a different nozzle to get underneath rocks and into nooks. Print in PETG
A simple, fast printing, TPU dustcover for Colt 1911 .45 ACP magazines. I have not printed this in other than TPU so adjustment may be necessary in other filaments. A new Colt magazine was used for design. It will likely fit clones,…
This is a simple multi color 3d print for a 45. acp bullet (doesn't need to be multicolor)
You'll need some glue and patience to assemble the model togheter. The model is about 13cm long and 6cm wide. Printed it on a ender 3 but with the current printer it can probably look better than the photo I provided. Made this on onshape…
Remix with decorated lid and 2mm taller bottom
Print with normal Support (not tree). Infill: 15% Material: PLA, ABS, PETG Nozzle: 0.4mm
I made an insert for .45 ACP . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
This set up allows you to mount a vangree 9 port USB hub in the top drive bay of a mac pro, pics below, some more instructions here… https://www.reddit.com/r/macpro/comments/184gps2/4151_built_in_usb_hub/
20mmx20mmx20mm Dimensions +/- 20 min print time Intended for PLA with a 0.4mm nozzle but could be used for a variety of materials and nozzles if scaled appropriately. Design Features: Micro & Macro Text 50 Degree Overhang Chamfer Filet…
Original Thing (you will need parts from it): https://www.thingiverse.com/thing:2746430 I noticed that a Raspberry Pi 3A+ fit nearly perfectly in the Macpi Pro Tiny V2.1 so I designed some parts to properly fit one in. This would probably…
Der Adapter wird in die originalen Schlauchmuffen der ACP-24 eingeschraubt und am anderen Ende kann ein 120mm Schlauch mittels Schelle befestigt werden. An der Seite befinden sich zwei M6 Gewinde, die ich benötigt habe um Dinge…
Like other Brass Goblins, I occasionally get 45acp with SPP now. https://www.thingiverse.com/joshuashappy created this little tray to help separate SPP from LPP. https://www.thingiverse.com/thing:4139489 Nice but loading it by hand can be…
A riser, and a cable organizer for the Apple Macpro 6,1 helps with ventilation Please LIKE if you download.
I never liked how much space was wasted with small ammo, so i made a new tray which doubles the capacity. There are 2 versions, 100 round and 104 round. The 104 round makes the best utilization of the space, but it's an odd count, so i…
a simple ammo box, Just have to use the ttray you have in the geco box You need only 2 M3 screw.
A single bin holder that accommodates two 1911 .45ACP single stack magazines.
The tube base holder has a 3mm heat insert in the middle for indexing of the tube holder itself. I used a 3mm x 12mm socket screw, the countersunk type not the socket head type. Parts needed: 3mm x 4.3mm heat insert 3mm x 12mm socket…
A 3D-printed tracking marker for Dry Fire Pro , the iOS dry-fire training app. Aim mode uses your iPhone's front camera to watch your muzzle while you press the trigger — it measures how far the muzzle moves, reads the drift direction,…
My Apple MacBook Pro is great and is more powerful than my desktop. So I now have it hooked up to a docking station and use it with all my monitors. But I wanted to stand the MacBook on its side to save some desk space. I went to Apple's…
This is a version of the original MacPro G5 rear fan bracket modified to fit with The Laser Hive's “mATX Original" case conversion kit. Link to the G5 case conversion kit: https://thelaserhive.com/product/matx-original-kit/ Just in case…
boite pour 100 munitions .45ACP
Normal print PLA infill 10-15%
ACPS First Layer Adhesion Test Model 220x180mm 0.1/0.15/0.2/0.3mm layer heights
4 piece Maker Award with the ability to create custom plaques. no supports needed if 3D printer is reasonably tuned. Trimmed the Benchy wave to fit the base of this trophy base. Scale to 10% before slicing.…
EDIT Just realized the piece that holds the tube is bigger than the original, I have an adapter for my use, so plan accordlingly! Remixed from wanousoubi for 45 acp. I scaled it up for 45 acp and took the guesswork out so you don't have…
Remixed this to add to the X10 Bullet Dropper set I created here ( https://www.thingiverse.com/thing:6995257 ) The 45 ACP is large so the 3 BB format did not work. So I modified this excellent model for this caliber to add to the set of…
ACPS Tag (Serviced and Calibrated)
Drop Insert 45ACP, remix by GerHART & Dewz.
![[OUTDATED] IKEA Kallax .45 ACP Case Door Handle Adapter](https://media.printables.com/media/prints/118987/images/2655522_438ffbb2-0f97-4332-a47c-7fac20dec0fe/outdated-assembly.jpeg)
![YACP Core XY 3D Printer (Yet Another Cube Printer) [BETA]](https://media.printables.com/media/prints/1017477/images/7729879_20b6e11e-ed81-431e-a44f-b1bcb9b9de50_570e61c9-f21a-4451-aace-5d7b909edb3c/thumbnail.png)
