P
PrintablesGolden Bear Models
Airbus 380-800
1:200 Desk Model of the Airbus 380-800. The .3MF file contains the parts for the print.
- Downloads
- 1,592
- Likes
- 97
- Rating
- 4.83
Search results: 380
Counting matching models…
P
PrintablesDieHard
Airbus A380 slingshot glider (Only need one elastic band!)
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
- Downloads
- 1,323
- Likes
- 210
- Rating
- 4.5
P
PrintablesFred11376
.380"_4way
This is a 3/8th's (actual internal diameter is .380") 4 way connector that was designed for for tractor supply 4' fiberglass rods in order to hold the elements to the main beam (all made out of the rods).
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesCLERX
Airbus A380 - 1:200
Model description The Airbus A380 is the world's largest passenger airliner and only full-length double-deck jet airliner. It typically has seating for 525 passengers, with a maximum certified capacity for 853 passengers. Airbus studies…
- Downloads
- 7,618
- Likes
- 892
- Rating
- 4.95
P
PrintablesFelix Wiseman
HPE DL380p/DL360p Gen8+ SFF 2.5" SSD/HDD Caddy
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
- Downloads
- 1,129
- Likes
- 37
- Rating
- 5
P
PrintablesHonza
Seeedstudio Respeaker XVF3800 case
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
- Downloads
- 1,038
- Likes
- 37
- Rating
- 0
P
Printablesthall72
Lego Compatible (30380.dat) Minifig Helmet SW Mandalorian with Rocket Pack
This model is compatible with the lego system.
- Downloads
- 832
- Likes
- 132
- Rating
- 4.2
P
PrintablesWeaselSqueezer
Pistol magazine speed loader for 380 Auto
Save your thumb! This is a simple speed loader for 380 Auto micro pistol single-stack magazines. It works well with the Taurus Spectrum, Bersa Thunder 380CC model, and probably other 6 - 10 round micro 380 pistols. You can use just about…
- Downloads
- 748
- Likes
- 59
- Rating
- 4.25
P
Printablesspearmountain
.380 ACP replica and snap cap
.380 ACP, also known as .380 Automatic Colt Pistol, .380 Auto, 9x17mm, 9mm Browning, 9mm Browning Court, or 9mm Short, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1908. Print this for…
- Downloads
- 719
- Likes
- 58
- Rating
- 5
P
PrintablesRoss Fisher
Starlink Mini Apache 3800 Lid Mount
3x clips, and 1x each of the mounts. PETG seems to work well. I used something called “chicago screws” to flat mount it to the box (can make water resistant by adding rubber washers to them). Public domain, do whatever you want - sell it,…
- Downloads
- 717
- Likes
- 100
- Rating
- 4
P
PrintablesTAmiss_3DP
Apache 3800 Insert Blank
Apache 3800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
- Downloads
- 640
- Likes
- 61
- Rating
- 0
P
PrintablesPlasticyBits
Bearing Press Tools 63800 6802 6900 6902 Bicycle MTB
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…
- Downloads
- 612
- Likes
- 112
- Rating
- 5
P
PrintablesWeaselSqueezer
Pistol magazine speed loader for M&P Shield EZ - 380 Auto or 9mm Luger
This is a simple speed loader for the Smith & Wesson M&P Shield EZ pistol single-stack magazines in 380Auto and 9mm Luger chambering. It may also work with other magazines of a similar size, but is specifically crafted towards the M&P…
- Downloads
- 584
- Likes
- 69
- Rating
- 5
P
PrintablesCysterion
Helldivers 2 Orbital 380mm Barrage Plaque
A plaque for the Orbital 380mm Barrage UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.
- Downloads
- 484
- Likes
- 78
- Rating
- 5
P
Printablesbriancmoses
Cooling Duct for SilverStone D380
In the building of my DIY NAS: 2017 Edition using the SilverStone DS380 case, I noticed that my hard disk drive temperatures were running a few degrees higher than I was comfortable with. I wound up reading a FreeNAS forum post describing…
- Downloads
- 424
- Likes
- 18
- Rating
- 5
P
Printablesappleroll
380mm Sturmörser (Sturmtiger Tank) with Crane and Stowage
[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…
- Downloads
- 421
- Likes
- 33
- Rating
- 0
P
Printablesthall72
Lego Compatible (13808.dat) Minifig Saxophone
This model is compatible with the lego system.
- Downloads
- 400
- Likes
- 54
- Rating
- 5
P
Printablesthall72
Lego Compatible (23800.dat) Wheel Rim 42 x 62 with 10 Spokes and 3 Pegholes
This model is compatible with the lego system.
- Downloads
- 389
- Likes
- 65
- Rating
- 0
P
PrintablesBowdenBuilder
Airbus A380 Kit Card
The Airbus A380 is renowned as the largest passenger airliner, accommodating up to 853 passengers in a single-class configuration. With its distinctive double-deck design and impressive range of over 8,000 nautical miles, it offers a…
- Downloads
- 377
- Likes
- 47
- Rating
- 4.5
P
PrintablesTeo_211
Airbus A380-800 Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 361
- Likes
- 49
- Rating
- 5
P
PrintablesEntoneer
Airbus A380 Key Storage
Key storage in Airbus A380 design. Up to 4 keys. For mounting on the wall just drill 2 screws through the inner two engines. If you want it bigger just scale the model in your slicer programm.
- Downloads
- 337
- Likes
- 52
- Rating
- 5
P
PrintablesAvery Yost
Skar 6.5 spacer for 3800 apache
designed for a dual skar 6.5 setup on a 3800 box
- Downloads
- 336
- Likes
- 17
- Rating
- 0
P
Printablesbglasford1
Apollo LUT Structure Levels 60-380
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
- Downloads
- 330
- Likes
- 30
- Rating
- 0
P
PrintablesJavi
Phone Support for Logitech K380 Keyboard
This is a phone support for the Logitech K380 keyboard. I love this keyboard and had the idea of turning it into a laptop for my phone. I used some parts from a project in Thingiverse, so consider this design a remix of:…
- Downloads
- 308
- Likes
- 83
- Rating
- 5
P
PrintablesZak1man
9mm/380acp/22 handgun wall mount low profile
My use case is for my gun closet that is getting pretty full. Wanted a gun mount that keeps them close to the walls and won't get in the way of retrieving long guns. Also, I needed the mount to fit any handgun of a caliber not just gun…
- Downloads
- 284
- Likes
- 15
- Rating
- 0
P
PrintablesCascade3DPrints
Apache 3800 Hard Case Logo Plate Blank
These plates are designed to offer customization options to those who wish to add their own logo. They are print-ready and available in two variations - non-chamfered and chamfered edges. Print at 100% infill. Have a logo you would like?…
- Downloads
- 273
- Likes
- 42
- Rating
- 5
P
PrintablesJohnS - N0CTL
Apache 3800 Panel Bracket
This is a bracket for the Apache 3800, mostly sold by Harbor Freight, that provided mounting holes to mount a face plate to the bottom of the case. For Cyberdeck's, Ham Radio, or any other need you can think of. These brackets are most…
- Downloads
- 272
- Likes
- 55
- Rating
- 5
P
PrintablesSolveSoul
V380 Snapfit Camera Mount for Creality Ender 5 Plus
Snapfit camera mount for a V380 camera. Snaps perfectly to the frame of the Ender Creality 5 Plus. The camera can be locked into place by rotating it onto the mount. Print orientation: Best printed on its side otherwise the print lines…
- Downloads
- 272
- Likes
- 18
- Rating
- 0
P
Printablesmattiabiondi
P3STEEL - X motor mount (380mm Anet A8 smooth rods)
Remixed from Prusa printable parts for Prusa i3 MK3. I'm using the steel frame from Orballo Printing and I have not been able to find a compatible X motor mount so I made this. I just edited the scad files in order to be able to use the…
- Downloads
- 263
- Likes
- 18
- Rating
- 0
P
PrintablesDylan Kirby
Apache 3800 dual recoil mx65 speaker grill and trim
Designed for the Apache 3800 case, for two Recoil MX65 drivers. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x16mm screws. Speakers are…
- Downloads
- 261
- Likes
- 33
- Rating
- 5
P
Printableskokona321
Paper towel holder max. 380 mm roll
A holder for large rolls of paper towels, usually found in car workshops and companies. I used a 15 mm wood stick where the roll sits on. And therefore the hole is 16 mm. Print one mirrored Updated hexagon model 50% Infill/ Gyroid PETG
- Downloads
- 226
- Likes
- 34
- Rating
- 4.8
P
PrintablesAjay Kamath
Airbus A320/A330/A350/A380 Landing Gear Lever Knob
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
- Downloads
- 208
- Likes
- 10
- Rating
- 0
P
Printablesfdmtrains
NEM 380 Container Fixing Plates in H0 scale (1:87)
NEM 380, “Fixing Elements for Containers and Interchangeable Superstructures” is a standard developed by MOROP, the European Association of Model Railroaders and Railroad Friends ( https://www.morop.org/ ). The standard describes how…
- Downloads
- 199
- Likes
- 29
- Rating
- 0
P
PrintablesAcetier
BLANK Apache Hardcase Tag Snug-Fit (3800/4800)
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
- Downloads
- 197
- Likes
- 25
- Rating
- 5
P
Printableslogicalplanet
XL Turntable (380mm Lazy Susan), printed on a 220mm bed
Someone asked me for this size and I thought it would be a very interesting exercise to try to make a 380mm circumference that can be printed on a 220mm bed. And, it came out great! Pretty straightforward, similar to my other lazy Susan…
- Downloads
- 195
- Likes
- 44
- Rating
- 4.5
P
Printablesen-x
Ruger LCP II 380 ACP Magazine Holder (Ruger LCP 2 380 ACP)
I needed a simple magazine storage container to house my extra, loaded LCP2 380 ACP magazines. I built 2 versions, a single and a double holder to house both the standard 6 round magazine as well as support for the extended 7 round…
- Downloads
- 186
- Likes
- 21
- Rating
- 0
P
PrintablesJunorion
Ruger LCP .380 1:1 Model/Prop
The model is split into two halves. The .3mf has 20% infill but the STLs can be printed solid for better weight. The .3mf file uses 1 material (PLA Black @ .020mm) Assembly - Glue Is Required, please see pictures. I used Gorilla Super…
- Downloads
- 182
- Likes
- 23
- Rating
- 0
P
Printablespop aruaru
reSpeaker XVF3800 4-mic case.
Better than seeed original case. Didn't block and didn't reflect sound wave by case.
- Downloads
- 179
- Likes
- 6
- Rating
- 0
P
PrintablesWebmanny
223/556/380/9MM Storage
I created several boxes to store ammo in cans. These work with 223, 556, 380 or 9MM. The ones standing print much faster that way and they don't suffer in quality. Enjoy!
- Downloads
- 172
- Likes
- 42
- Rating
- 0
P
PrintablesLush
ISO 7380 Hex Socket Button Screw Gridfinity Printable Label
Thanks to @Eistee_158202 for providing the resources that allowed me to generate the labels. For more info have a look at: https://www.printables.com/model/676564-gridfinity-bin-labels-hexagon-socket-head-cap-scre I uploaded only a few…
- Downloads
- 160
- Likes
- 25
- Rating
- 5
P
PrintablesArnimated
eufy S380 HomeBase Wall Mount
Wall mount for eufy HomeBase S380 (HomeBase 3)
- Downloads
- 152
- Likes
- 7
- Rating
- 5
P
PrintablesOjOj
Oil plug wrench / Klucz do korka oleju 06L103801 / 06L 103 801 / 06l103801 / 06l 103 801 Audi S3/A3 8V 2.0TFSI
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
- Downloads
- 151
- Likes
- 13
- Rating
- 5
P
PrintablesJake Hink
Rugged Munition Box - 9mm - .380ACP
Remix of the rugged box to accommodate ammunition in 9mm or .380 200x185x60 version can house 2 x dividers each holding 240 cartridges plan to add thing foam to the lid and underside of top divider. scale down to 10% models are huge
- Downloads
- 138
- Likes
- 27
- Rating
- 0
P
PrintablesHarry's Workshop
Checkered Grips for the Browning 1911-380
These are a set of checkered Grips for the Browning 1911-380. I like to print the first few layers (a mm or two) in a different color. Note, I changed the original screws to countersunk screws as they recessed better
- Downloads
- 132
- Likes
- 10
- Rating
- 0
P
Printablesjosef trautheim
.380 ACP Prop
This is a .380 ACP prop/dummy cartridge material: PLA slicer: Cura layerheight: 0,12mm infill: 10% infillpattern: triangles If you find any errors with the model please let me know EDIT: dimension Error should be fixed
- Downloads
- 132
- Likes
- 12
- Rating
- 0
P
PrintablesUmberto Ragone
Retevis RT3S / TYT MD-UV380 SP/MIC (speaker/microphone) replacement port cover
The speaker/mic rubber port cover of my Retevis RT3S crumbled to pieces, so I designed from scratch this replacement port cover. From my understanding, the Retevis RT3S is the same radio as the TYT MD-UV380, so I think it will be…
- Downloads
- 132
- Likes
- 10
- Rating
- 0
P
PrintablesMosthamless
Harbor Freight Apache 3800 Lower Shell
Custom-fit lower insert template for the Apache 3800 case . Precision Fit: Includes a 1° taper to match the case walls. Customizable: Designed as a base for you to build your own organizers or tool trays. Valve Compatibility: The "RV"…
- Downloads
- 126
- Likes
- 14
- Rating
- 0
P
Printableswetman
single slot skeletonized low profile bracket for the intel arc a310 and a380
I found it strange that a blower style card wouldn't have skeletonized back bracket so I made one add tree supports and have fun
- Downloads
- 123
- Likes
- 4
- Rating
- 0
P
PrintablesUnrest7322
Meshtastic RAK19001 Base Board - RAK13800 Ethernet Module - RAK19018 PoE module Base Plate - Gratury Junction Box, IP67 Waterproof Plastic Enclosure 220×170×110mm (8.6"×6.7"×4.3")
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
- Downloads
- 122
- Likes
- 33
- Rating
- 0
P
PrintablesRemy66
SPEED LOADER FOR BERETTA 80X CHEETAH .380
print in PLA with 6 walls
- Downloads
- 115
- Likes
- 6
- Rating
- 5
P
PrintablesAmrut Prabhu
ReSpeaker XVF3800 Voice Assistant
Watch the full video on the channel :
- Downloads
- 113
- Likes
- 5
- Rating
- 0
P
PrintablesBumm
Airbus A380-800
You can make a Lufthansa, Emirates or a Singapore Airlines A380-800
- Downloads
- 110
- Likes
- 7
- Rating
- 0
P
PrintablesLobbyLobster
Simson Kupplungsdeckel Dichtung 38019
Gedruckt aus TPU 98A von 3DJacke. Auf die beiden Dichtlippen achten, diese zeigen bei der Montage nach außen.
- Downloads
- 109
- Likes
- 9
- Rating
- 0
P
PrintablesPiercet
3d printed cable roller and waterproof control box for a Schill GT380 reel to turn it into a ROV or robot tether
To build one of these, you will need a Schill Gt380 http://www.markertek.com/product/schill-gt380/schill-gt380-19x11-plastic-rubberized-cable-reel . They are not inexpensive. You will also probably want the optional solid lid plate and…
- Downloads
- 108
- Likes
- 27
- Rating
- 0
P
PrintablesCascade3DPrints
Apache 3800 Spektrum Plate
I wanted to have a custom plate to have the outside of the Harbor Freight Apache 3800 hard case. More Soon designs soon to come of other brands if suggested. Please like and share your makes! Use 100% infill for best results. Printed in…
- Downloads
- 108
- Likes
- 18
- Rating
- 5
P
Printablesbrass_ring
.380 ACP / 9X17mm Stacking Loading Block
.380 ACP / 9X17mm stacking loading block. Category: Tool Holders & Boxes
- Downloads
- 100
- Likes
- 14
- Rating
- 0
P
PrintablesCDR
.380 Auto (.380 ACP) Snap Cap
This model is exactly the same dimensions as the actual round, so this model is better suited for Stereolithography type printers. Final sanding may be required.
- Downloads
- 99
- Likes
- 4
- Rating
- 0
P
Printablessmogan71
Logitech K380 Wall Mount For Flat Surfaces
remix of Skadis logitech K380 from Dirk Hoefle. this version is optimized for flat surfaces. three versions: No holes → for use with double sided tape Tho Small Holes → for use with two small nails (and maybe double sided tape in…
- Downloads
- 99
- Likes
- 13
- Rating
- 0
P
PrintablesMeuon
Pocket Holster for Taurus 380
Inspired by a Taurus Curve, this makes it safer and less obvious to have a Taurus .380 PT 738 TCP in your pocket. Also holds a 2nd magazine. It''s one my my earliest designs, photo is of the original, printed on a Prusa Mini+ with…
- Downloads
- 97
- Likes
- 8
- Rating
- 0
P
PrintablesTA2WK
QYT KT-8900D & ZASTONE MP380 Knob
QYT KT-8900D & ZASTONE MP380 Knob Similar size as orijinal knob. I haven't test it on KT-8900D but the that device looks the same, just branding. If you like this design please consider buying a coffee for me. Lol. Thanks…
- Downloads
- 96
- Likes
- 4
- Rating
- 0
P
PrintablesNZPete
Wall mount for Vtech bm3800n baby monitor
Quick release wall mount for the vtech bm3800n, which allows you to move the monitor from room to room easily and fast Attach the official (supplied) mount to the camera first, then print and mount this bracket in as many rooms as you…
- Downloads
- 95
- Likes
- 15
- Rating
- 5
P
PrintablesHarry's Workshop
Browning 1911-380 Barrel Bushing Wrench
This is a wrench to remove the Barrel Bushing on a Browning 1911-380 (It may also fit the Browning 1911-22 but I have not confirmed if it fits) I printed it in ABS at 100% solid for extra strength.
- Downloads
- 92
- Likes
- 4
- Rating
- 0
P
Printablesm.skinnes
Nissan 350Z - 380RS style fender flare - Front right
Printable fender flare in 6pcs. Glue together, bondo and sand. I printed it in PETG and used super glue. Flip/mirror to make left side.
- Downloads
- 89
- Likes
- 10
- Rating
- 0
P
PrintablesRaphael
Adapter Klimaanlagen Quick Release Schlauchadapter Trotec PAC 3800S
Adapter für größere Schläuche mit 3 Schnapphaken am Anschluss des Schlauches und 142mm Durchmesser. Passend zu meinem Durchführungssystem um die Klimaschläuche möglichst ohne Luftverlust durch eine Platte am Rollladen zu führen.
- Downloads
- 88
- Likes
- 13
- Rating
- 0
P
PrintablesC_J
HF Apache 3800 Base Grid
Created this grid base for a Harbor Freight Apache 3800 box so I could attach various components to it for use as a battery box. I used doublesided tape to secure the grid to the box bottom. The A and B sides will just fit on an ender 3…
- Downloads
- 87
- Likes
- 25
- Rating
- 0
P
PrintablesRaphael
Klimaanlagen Quick Release Schlauchadapter Trotec PAC 3800S
Schnellkupplung für den Schlauch eines Klimagerätes (hier Trotec PAC 3800 S Der Schlauch kann in der Rolladenplatte per Bayontettverschluss befestigt werden. DAmit kann zwischen mehreren Räumen schnell gewechselt werden. Ich werde noch…
- Downloads
- 87
- Likes
- 14
- Rating
- 0
P
Printablessblomfield
9mm / .380 Brass Sorter
This is a sort assistant for 9mm and .380 casings. Just drop a bunch in the funnel and shake it around. The casings will fall into the holes head stamp down allowing you visually see or physically feel the height difference between the…
- Downloads
- 86
- Likes
- 8
- Rating
- 5
P
PrintablesChris
Pk380 speedloader
Remixed for Walther PK380. Single stack 380. This took a little work in tinkercad to keep the thick walls and the right size for the plunger, But it turned out ok, and fits perfect. I modded the pla file and upsized it for printing in…
- Downloads
- 84
- Likes
- 1
- Rating
- 0
P
Printablesspiggytech
spiggytech ASRock A380 Challenger ITX replacement shroud
Hello, Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. Assembly Instructions: Print in PETG @ 15% infill Flat sides down. Do not…
- Downloads
- 81
- Likes
- 12
- Rating
- 0
P
PrintablesAaron F
Tamiya 380 adjustable motor adapter
Tamiya 380 adjustable motor adapter Print instructions Category: Toys & Games Summary Tamiya 380 adjustable motor adapter
- Downloads
- 75
- Likes
- 8
- Rating
- 0
P
Printablesappleroll
380mm Sturmörser (Sturmtiger Tank) v2
Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued in. This can be printed by both FDM and resin printers, although…
- Downloads
- 73
- Likes
- 2
- Rating
- 0
P
PrintablesDarren Larkins
reSpeaker XVF3800 Enclosure with multiple parts
This is a remix of the original model plus the feet and legs from another one (that I can't currently find again, my apologies) so that the bottom simply slots into place with a twist. All edges are filleted and the overall assembly…
- Downloads
- 73
- Likes
- 8
- Rating
- 4.67
P
Printablesknmorgan
Gridfinity Bin for Wiha 3801 Stubby Screwdriver
This is a 2x1x3 Gridfinity bin for the Wiha 3801 stubby screwdriver. I believe this will also work with the older 380 model, but I have not tested this. It will not fit the newer 3802 stubby, nor will it fit other model stubbies (281, etc).
- Downloads
- 71
- Likes
- 13
- Rating
- 5
P
Printables3Dnoob
Logitech Pebble Keys 2 K380s Cover
I printed mine on a Prusa MK3S using white PLA+ and split the model into two halves. After printing, I used super glue to bond the halves together. I also added a brim during printing to help prevent the parts from tipping over.
- Downloads
- 67
- Likes
- 10
- Rating
- 5
P
PrintablesA. Guy
Dyson vacuum DC24 wand cap, part number 913806-01
It's a replacement cap for DC24 wand upper handle. Print it out with the flat part (top) against the plate, and pop it on.
- Downloads
- 65
- Likes
- 5
- Rating
- 5
P
PrintablesCunfusu
Steam Deck Stand for Anker 8 in 1 usb-c hub (553 A8380)
Simple remix of the stand by Nestea Anker produce also a very similar hub, confusingly commercialized also as 8-in-1 that has two hdmi ports. This hub is also known as “media hub”, model “553” or “A8380” (you can find this last model…
- Downloads
- 64
- Likes
- 6
- Rating
- 5
P
PrintablesHarry's Workshop
Browning 1911-380 Rear Fiber Sight (And Front Fiber Sight)
This is a Rear Fiber Sight for the Browning 1911-380 (it should also fit the 1911-22) I found a front sight here and decided to make a rear sight to match https://www.thingiverse.com/thing:4249698
- Downloads
- 61
- Likes
- 4
- Rating
- 0
P
Printablesbrass_ring
.380 ACP / 9X17mm Vase Mode Stacking Loading Block
.380 ACP / 9X17mm Vase Mode stacking loading block. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: none Notes: Print in Spiral Vase Mode with double your regular Perimeter Extrusion Width (0.9.) Category: Tool…
- Downloads
- 59
- Likes
- 12
- Rating
- 0
P
PrintablesKilowatt
TYT uv380 exoskeleton
A cage for the TYT uv380 DMR radio, it puts a fence around the side buttons and a cover over the frequency adjustment knob on top of the radio, mounts to the battery and doesn't block the battery button.
- Downloads
- 58
- Likes
- 4
- Rating
- 0
P
PrintablesMad89
Ender 3 v3 SE/KE 380mm Creality LED Bar adapter
Adapter for original Creality LED Bar from variant for CR-10 (380mm) to install on V3 SE/KE. I bought this variant by mistake, but… it's wider and give more light :) P.S. On photo I still have a mess with cables because, i was too lazy to…
- Downloads
- 58
- Likes
- 10
- Rating
- 0
P
PrintablesJosef Kmínek
Hinge Lenco L-3809 - Lenco S002285
Lenco S002285 Replacement Hinge for models: Lenco L-3809 Lenco L-3818 Lenco L-401 Part1 is comleted and tested. Part 2 is not completed!
- Downloads
- 56
- Likes
- 2
- Rating
- 0
P
Printablesthe_turtle_panda
Bersa Thunder 380 Mag Extension Grip
A simple grip that slides onto a 10-round magazine for the Bersa Thunder 380 pistol.
- Downloads
- 56
- Likes
- 9
- Rating
- 0
P
PrintablesHabermoney
Denon AVR-3803 Reciever Knob
This should print and have a good fitting. I printed at .2mm layer height on my printrbot Metal Plus
- Downloads
- 55
- Likes
- 7
- Rating
- 0
P
PrintablesAk-Adventurer
380 Auto Cartridge Case(Vase Mode)
Realized one afternoon that I needed a semi "tactical reload" for my pocket pistol; after having to shoot at a stray dog, I was left with only 3 rounds in my CCW for the rest of the day. Needed something in between carrying a full box of…
- Downloads
- 55
- Likes
- 6
- Rating
- 0
P
PrintablesMike_Prints
Loading Block for .380 ACP
Reloading block designed for the .380 ACP. Could also be used with 9mm.
- Downloads
- 53
- Likes
- 8
- Rating
- 5
P
Printablesplasterek3d
Flexi A380-Style Airliner – Articulated Print-in-Place Jet Plane
This is a flexible / articulated 3D model inspired by a modern Airbus A380–style passenger aircraft ✈ Designed as a print-in-place model , it prints in one piece with no supports, no glue, and no assembly required . Thanks to its…
- Downloads
- 49
- Likes
- 4
- Rating
- 0
P
Printablesmattiabiondi
P3STEEL - Y bar stopper (380mm Anet A8 smooth rods)
This is a remix from "Y Bar Stopper P3 Steel XL" by Hobsie. Y bar stopper for P3STEEL using stock 380mm Anet A8 smooth rods. Add a washer for better stability. My PRUSA I3 STEEL frame is from Orballo Printing.
- Downloads
- 49
- Likes
- 5
- Rating
- 0
P
Printablesclem2ray
BMW F900 XR - Navigator Holder (77528380735)
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
Printablestato_713
Samsung Galaxy Tab A2 S t380 case
Originally published here: Samsung Galaxy Tab A2 S t380 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to…
- Downloads
- 45
- Likes
- 0
- Rating
- 0
P
PrintablesStanley
Butterfly nut for Gardena 380 Cylinder Lawnmower
This is spare butterfly nut for all Gardena 380 Cylinder Lawnmower models. Original part is made of POM (Polyoxymethylene), but I made mine of PETG (threaded) and ABS (nut insert). Print instructions Category: Outdoor & Garden Summary…
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
Printablessoupine
.380 Snap Cap
A simple snap cap/dummy round with a TPU primer insert. Print the snap cap in something rigid with good layer adhesion and the insert in TPU. The snap cap should survive cycling a few times if you aren't too rough with it. Always cycle it…
- Downloads
- 39
- Likes
- 8
- Rating
- 5
P
Printablesphilbo_bagginsy
Cognex 3800 to SwivelLink AFSB-1 Base Adapter
I created this adapter plate to mount a Cognex 3800 camera to the base of a swivellink arm. Printed in PETG @ 0.2mm layer height, no supports needed. Threads (¼-20) are modeled in to the plate, which worked well for my application. I used…
- Downloads
- 36
- Likes
- 0
- Rating
- 0
P
PrintablesPHOENIX SYSTEMS UK
Eco Strip 9380 Timing belts
We recommend to use good quality TPU, the lower the shore hardness the better grip. The softer the material is - it will wear down quicker. The program I attached is specifically for Polyflex TPU90 from Polymaker, If you are using…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesAndre Z
Jabra Link 380 holder for Evolve2 65 Charging Stand USB-C/USB-A
I had no convient place to store the Link-Dongle when it is not in use, so I created a holder, that attaches to the Evolve2 65 Charging Stand. I have created a version for the USB-C variant and also for the USB-A variant. German - Deutsch…
- Downloads
- 30
- Likes
- 3
- Rating
- 0