1 / 5
spiggytech ASRock A380 Challenger ITX replacement shroud
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
customizeable shrouds for your favorite niche GPU
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 82
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case.
Assembly Instructions:
- Print in PETG @ 15% infill Flat sides down.
- Do not remove the heatsink!
- Remove original shroud by removing the fan screws(3), followed by the shroud screws(5).
- Install the main body (the cylinder) to the heatsink via shroud screws(5)
- Then attach the fan via fan screws(3)
- Apply small dab of CA glue to the ring of the shroud. And connect to the main body
- Enjoy how it looks because it's badass and you're badass