Counting matching models…
Current Version: v1.1 & v1.2b Small update: 4/16/2023: It's come to my attention there is a new type of hot end block that has two pegs. I've taken the liberty to do some modification to my block design and accommodated the pegs. This…
This is a modest upgrade to the Surefire X300U-A by replacing one or both of the existing rail clamps with an extension piece. Background: These were iteratively developed in about 9 stages. I later found out similar products already…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The enclosed design includes…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The SFX version backplate does…
Hello Everyone, This is a small tool for cutting PTFE for the AnkerMake M5. Proper PTFE length is a way to prevent filament blowouts that can break your printer. I've purposefully made the channel length longer than your standard PTFE…
Work in Progress! Needed: Testers. Please report any issues. These are side accessory bins for the Ankermake M5C EDIT 8/28/23: Corner geometry has been adjusted.
This is a replacement shroud design for the EVGA 3060/3060TI XC with 2 fans. It will fit both Gaming and Black edition GPUs. I wanted a matching GPU to my Monolith rig, however, it seems there are no companies producing a Sub205MM GPU in…
This project is in alpha testing. As such, it may have goofs and slight fitment gaps. I'm working on that as I acquire another GPU to test the fitting. Your feedback is highly valued in this stage Update 7/22/2023: Added a new assembly…
This is a work in progress
Updated 3/10/25: 5.0L Launched! Shoutout to /u/hatigarm work workshopping this with me Soft launch/Work In Progress: spiggytech 4.9L SFFPC General stats: Dimensions: 110mm x 195mm x 229mm, 4.9L overall (minus feet & carry handle) ITX…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) I was trying to make a small server device with a spare ITX motherboard and needed a case quickly. As such, this design is pretty rudimentary. Edited 9/2/23: Small dimensional…
EDIT! 4/26/2023: Added a variety of combs that curve width-wise for a more fanned out look. These are combs in varying degrees of bend for the purpose of management in a “hard line” style. The type of cable been tested on are EVGA custom…
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) A further development of my previous PicoPSU Chassis to now include a single slot for a LP card. The idea is to flex the design in case I need to turn the computer into a router or…
Hello, Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. Assembly Instructions: Print in PETG @ 15% infill Flat sides down. Do not…
Work in Progress. Please give feedback if you have it. Break into Objects. Print on the sides. Tested with ASA @ 0.12mm height, 100% infill, +12 wall Hardware Required: 2x M3 x 25mm screw Pan or Hex head recommended. 2x M3 Nylock
The project started as a concept for a cylindrical “Trashcan” Chassis for the ASRock X300M-STX found in the Deskmini. The whole thing measures 225mm tall from end to end, not counting feet. 175mm in overall diameter from the widest parts.…
This is a quick project I made in collaboration with a friend. It is a small AIO hose manager for the ASUS Prime AP201 chassis using a Arctic LF2 280mm AIO. His chassis had a collision with the motherboard, so the AIO was placed in an…
USE AT YOUR OWN RISK Nozzles are in short supply at the moment so I developed this tool block as a means of floating by until someone produces dedicated M5 nozzles. I have the hardenedsteel ones, but I don't like working with them. This…
These are 4mm shims meant to clip inside the Z-Axis towers to make the M5 compatible with Volcano hot ends. Print 2x, PLA/PETG @30% Cubic (100% recommended) You will need the following items: Polisi3D Volcano Hot End Block Volcano Nozzle…
Building on my previous 4.9L design, and bringing it to contemporary standard, I present the 5.0L It has the following updates: Removed all heat inserts. You can build this with normal M3 nuts Can be built with one screw pack! No more…
UPDATED 8/26/2024: putting up some single fan 120mm brackets that never panned out for me. But you might find it useful. This is a small tophat addition to the Sirius S40. It is made to add some more air movement inside the case. You can…
EDIT! This item is now obsolete, the newest design can be found here: https://www.printables.com/model/319513-spiggytech-portable-chassis-for-asrock-x300m-stx This project is a work in progress The idea is to build a small enclosure for…
This is a hot end service tool that I made up very quickly to conduct service. AnkerMake community member Austin Dennis found that this block shares mounting points for the AnkerMake M5. I needed a tool to work on the block when it is…
Updated 6/3/2023 Added screw holes for TPU feet. Also added feet to be made in TPU. Redesigned it from the ground up. This project is a work in progress I took the strong points of the original design and revamped it in such a way that…
This is a phone/mouse holder that I designed to match with NoycePrints' Headphone stand . I really enjoyed the stand and wanted something similar to hold my phone or mouse when not in use. I switch between the Logitech MX Master 3S for…
This model has been discontinued from development. A new design can be found here. Designed it from the ground up. This project is a work in progress At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX . The cooler…
WORK IN PROGRESS This is for the AnkerMake M5, specifically the retraction indicator mod. (see images) The mod is done by detaching the bowden tube and adding a piece of PTFE tube. The new segment will now raise during retraction so it…
[WIP!] This is the trial run of my own scratch-built sight tool. The original design started to crack on an aftermarket slide, which brought me to scratch-build the design with more meat and more gripping power. This design is the product…
This is a small magnet test for figuring out tolerances. It is what I used to figure out the magnet holes in my AnkerMake bins. You can tilt the tool and add supports to make it print wonky, replicating what it would be like to print a…
This is a simple magnetic poop bin for the Bambu Labs P1P, X1, and X1C. I made it as a quick solution. The magnets are 5mm x 2mm disk magnets.
For use with the Evike Spitfire 28mm Tracer I noticed that some come out of the box very tight and difficult to unthread. This handy tool is so you can unthread the endcap without using pliers, clamps, or vices which can mess up the…
Work in Progress. Please give feedback if you have it. Break into Objects. Print on the sides. Tested with ASA @ 0.12mm height, 100% infill, +12 wall Hardware Required: 2x M3 x 25mm screw Pan or Hex head recommended. 2x M3 Nylock
