1 / 4
spiggytech Volcano Nozzle to AnkerMake M5 gauge — image 1
1 / 4

spiggytech Volcano Nozzle to AnkerMake M5 gauge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a tool for sizing up and measuring an E3D V6 Volcano nozzle for modification to AnkerMake M5

Rating
5 / 5
Likes
31
Downloads
65
Makes
1
Views
2,255
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

USE AT YOUR OWN RISK

Nozzles are in short supply at the moment so I developed this tool block as a means of floating by until someone produces dedicated M5 nozzles. I have the hardenedsteel ones, but I don't like working with them. This is an answer to my problem. It might help you too.

This project is a tool block for sizing up and measuring E3D V6 Volcano nozzles for modification to AnkerMake M5 hot ends. The tool will help you determine the length of cut and sizedown for the appropriate fitment. 

I've used this on brass and brass/ruby nozzles. I don't recommend two-part nozzles as some ruby/PCD nozzles require peening the end or the ruby will come loose. And I don't recommend hardened steel as it is difficult to cut and polish.

Note: this is for marking the nozzle. If you intend on using the block to cut, a bucket of cold water for dipping is necessary to ensure the block stays cool and in shape.  

 

There are three parts.

  1. Volcano Gauge
  2. A press to hold the nozzle
  3. And a stop (squared donut) that confirms the nozzle is seated in a square

Instructions: 

  • Put the Volcano Nozzle in the block
  • Press it with the Press
  • Fit the stop to ensure the nozzle is square
  • Use a sharpie to mark the excess trim area
  • Done! The nozzle is now marked!

Tags