1 / 4
Spiggytech 5.0L Sandwich SFFPC ITX Chassis NO HEAT INSERTS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reimagination of my previous design, but with an easier barrier of entry for new builders
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 1
- Views
- 966
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Building on my previous 4.9L design, and bringing it to contemporary standard, I present the 5.0L
It has the following updates:
- Removed all heat inserts. You can build this with normal M3 nuts
- Can be built with one screw pack! No more buying 2-3 packets of screws!
- Single Tool Installation! Use one screwdriver so you don't have to keep losing track of screwdrivers!
- Volume increase to allow <205mm Length GPUs per new giant standards (Not my fault Nvidia thinks a 4090 is “SFF”.) Biggest GPU (right now) you can fit is a Gigabyte 4070 Windforce OC (probably). I'll confirm it when I can afford one.
SHOUTOUT TO /U/HATIGARM WHO HELPED WORKSHOP THE DIMENSIONS
Print Requirements: At least 250mm x 250mm Print Bed (A1, P1S/P1P, X1, Ender7…)
General stats:
- Dimensions: 110mm x 210mm x 229mm, 4.9L overall (minus feet & carry handle)
- ITX Motherboard (Tested on Gigabyte B5501)
- 39mm Cooler (Tested on Noctua L9a-AM4 and Thermalright AXP90-x36)
- GPU Specs : Two-Slot, Two Fan, 203mm Max, Originally designed for the Gigabyte 4060ti (16GB) Windforce OC in mind. But you can squeeze in the Gigabyte 4060 LP in here. Also tested on the ASRock A380 Challenger ITX
- 190mm Riser Cable needed
- PSU: FlexATX like ENP-7660B 600W or FSP FlexGURU 500W
- Buttons (2): 12mm pushbuttons, one for power, one for CLR_CMOS… or you can use a 12mm turn-key lock.
- Uses about 300g of filament, with supports and brims and stuff.
General Advice:
- PETG+ recommend
- ASA/ABS is better
- Zipties are super helpful for this build
- Do not feed after midnight
- You can use various infill patterns of your choice. I just choose small hexagons
- 6mm LED strips in this thing look badass
Stuff I'm up to:
- Take boatload of photos
- Add .3mf for the Bambu/Orca Crowd ✅
- Finish BOM
- Assembly Manual
- Cool Youtube Video
- Learn to make Flan ✅
- Design visual variations