spiggytech portable chassis for ASRock X300M-STX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a reimagining of my older X300M-STX Chassis. Starting from the ground up, I added features.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 125
- Makes
- 0
- Views
- 1,674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an unusual amount of movement.
This is for the ASRock X300M-STX Motherboard that comes from the DeskMini X300
Assembly Manual will be added later.
Case is printed in PLA+
Materials:
4x M3x6mm for the mobo standoff anchors
4x M3x6mm for the standoffs
4x M3x6mm screws for holding the mobo
20x M3x8mm screws for holding the chassis together
2x M3x8mm screws for holding the power button
4x M3x10mm screws for holding the carry handle hinges
2x M3x8mm screws for additional strength to the carry handle hinges
2x M3x8mm for capping the carry handle to the hinges
Updated 2/8/2023:
Some small adjustment to the IO panels. The rear IO's Antenna holes are enlarged slightly for quicker install. Front IO's button has been flattened so it can be printed face down for a textured front. Likewise there's some tolerance adjustment to front IO components.